1. Introduction
Thank you for choosing the FLEXISPOT E3 Dual Motor Electric Standing Desk. This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your new adjustable height desk. Please read this manual thoroughly before use to ensure safe and efficient operation.
2. Safety Information
- Ensure all components are present and undamaged before assembly.
- Keep children and pets away from the desk during operation.
- Do not overload the desk beyond its maximum weight capacity of 220 lbs.
- Ensure there are no obstructions in the desk's path when adjusting height.
- Only use the provided power adapter.
- Do not attempt to disassemble or repair the motor or control unit yourself. Contact customer support if issues arise.
3. Package Contents
Verify that all the following components are included in your package:
- Desktop (55.1" x 27.5" Marble Grey)
- Desk Frame (White, Dual Motor)
- Control Panel with Memory Presets
- Power Adapter and Cables
- Assembly Hardware (screws, tools)
4. Assembly Instructions
Follow these steps to assemble your FLEXISPOT E3 Standing Desk:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble Desk Frame: Attach the lifting columns to the crossbar. Ensure all screws are tightened securely.
- Attach Feet: Secure the desk feet to the bottom of the lifting columns.
- Prepare Desktop: Position the desktop upside down. Note: The desktop may not have pre-drilled holes for the frame. You may need to drill approximately 20 holes to secure the frame to the desktop. Use appropriate drill bits and exercise caution to avoid drilling through the desktop surface.
- Mount Frame to Desktop: Carefully align the assembled frame with the desktop. Secure the frame to the desktop using the provided screws.
- Install Control Panel: Attach the control panel to the underside of the desktop in your desired location.
- Connect Cables: Connect the motor cables to the control box, and then connect the control panel cable and power adapter cable to the control box. Ensure all connections are firm.
- Initial Calibration: Plug the desk into a power outlet. Perform an initial calibration as per the quick start guide included in the packaging. This typically involves pressing and holding the down arrow button until the desk reaches its lowest point and then slightly rises.
5. Operating Instructions
Your FLEXISPOT E3 desk features intuitive controls for seamless height adjustment.
5.1 Adjusting Height
- Press the Up Arrow (^) button to raise the desk.
- Press the Down Arrow (v) button to lower the desk.
- Release the button at your desired height. The dual motors operate quietly (under 50 dB) for a smooth transition.
5.2 Setting Memory Presets
The control panel allows you to save up to 4 custom height settings:
- Adjust the desk to your desired height using the Up/Down arrows.
- Press the ‘M’ button (or similar memory set button, if present) once. The display will flash.
- Immediately press one of the numbered preset buttons (1, 2, 3, or 4) to save the current height to that preset.
- To recall a saved height, simply press the corresponding numbered preset button. The desk will automatically move to the saved position.
6. Features Overview
- Seamless & Silent Dual Motor Operation: Experience whisper-quiet power, lifting your desk silently under 50 dB. Engineered to handle 65% more weight than single motors.
- Robust Load Capacity: Supports up to 220 lbs, providing a sturdy and reliable workstation.
- Roomy & Ergonomic Workspace: A 55.1” x 27.5” solid-surface desktop provides ample space for your setup.
- Anti-collision System: Detects and prevents collisions to improve safety during height adjustments.
7. Maintenance
- Regularly wipe the desktop surface with a soft, damp cloth. Avoid harsh chemicals.
- Check all screws and connections periodically to ensure they remain tight.
- Keep the area around the desk legs clear of dust and debris to ensure smooth operation of the lifting mechanism.
8. Troubleshooting
If you encounter any issues with your FLEXISPOT E3 desk, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move | Power cable disconnected, motor cable loose, overload. | Check all cable connections. Reduce weight on the desk. Perform calibration. |
| Desk moves unevenly | Uneven weight distribution, loose connections. | Distribute weight evenly. Check frame assembly and connections. |
| Error code displayed | Specific malfunction. | Refer to the quick start guide for specific error code meanings or contact customer support. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | FLEXISPOT |
| Model | E3 |
| Desk Design | Standing Desk |
| Product Dimensions | 55.1"D x 27.5"W x 27.6"H |
| Color | White Frame + Marble Grey Top |
| Base Material | Metal |
| Top Material Type | Wood |
| Maximum Weight Recommendation | 220 Pounds |
| Special Feature | Corded, Adjustable Height, Memory Presets, Dual Motor |
10. Warranty and Support
FLEXISPOT provides a comprehensive warranty for your peace of mind:
- 5-Year Coverage: Applies to the desk frame and motor.
- 2-Year Protection: Applies to the control panel and electronics.
For any assistance, warranty claims, or technical support, please contact FLEXISPOT customer service directly. Refer to your purchase documentation for specific contact details.
11. Official Product Video
Watch this video to learn more about the precision and innovation behind FLEXISPOT products.
