1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the YUHANUS Smart Door Access Control System. This kit is designed to provide secure and convenient access management for outswinging doors, integrating a 600lbs magnetic lock with Tuya App and remote control capabilities.
2. Package Contents
Verify that all components listed below are included in your package:
- 600lbs Magnetic Lock with Built-in Alarm Beeper
- Power Supply Controller (Model: SP1203)
- 2 Remote Controllers
- Stainless Steel Exit Button
- Power Plug Connector
- Mounting Hardware (screws, washers, L-bracket, Z-bracket)
Image 2.1: Overview of the YUHANUS Smart Door Access Control System kit components.
3. Product Specifications
| Feature | Specification |
|---|---|
| Magnetic Lock Holding Force | 600 lbs |
| Power Supply Input | AC 100-240V |
| Power Supply Output | DC 12V / 3A |
| Timer Adjustment (Power Supply) | 0-15 seconds |
| Remote Control Frequency | 433 MHz |
| Max Remote Controllers Supported | 30 pcs |
| Door Type Compatibility | Outswinging doors |
| Alarm Beeper | Integrated in magnetic lock |
| App Control | Tuya App |
4. Installation Guide
4.1 Safety Precautions
- Ensure power is disconnected before beginning any installation or wiring.
- Consult a qualified electrician if you are unsure about any wiring procedures.
- Wear appropriate safety gear during installation.
4.2 Magnetic Lock Installation (Outswinging Door)
For outswinging doors, the magnetic lock body is typically mounted on the door frame, and the armature plate is mounted on the door. Z and L brackets are required for proper alignment.
- Mount the L-Bracket: Secure the L-bracket to the door frame using the provided screws. Ensure it is level and positioned correctly for the magnetic lock body.
- Mount the Magnetic Lock Body: Attach the magnetic lock body to the L-bracket.
- Mount the Z-Bracket: Assemble the Z-bracket components and attach them to the door. The Z-bracket allows the armature plate to align with the magnetic lock body.
- Attach the Armature Plate: Secure the armature plate to the Z-bracket. Ensure the armature plate can pivot slightly to allow for full contact with the magnetic lock face.
- Adjust Alignment: Close the door and adjust the position of the magnetic lock and armature plate to ensure full contact and secure locking.
Image 4.1: Z and L brackets used for mounting the magnetic lock on outswinging doors.
Image 4.2: The 600lbs magnetic lock and its corresponding armature plate.
4.3 Exit Button Installation
Mount the stainless steel exit button in a convenient location near the door on the secure side. Ensure it is easily accessible for exiting personnel.
Image 4.3: The stainless steel push-to-exit button.
4.4 Power Supply Controller Installation
Mount the power supply controller in a secure, dry location, preferably near the door frame but out of direct reach. Ensure proper ventilation.
Image 4.4: The SP1203 power supply controller.
4.5 Wiring Diagram
Follow the wiring diagram carefully to connect all components. Incorrect wiring can damage the system or pose a safety risk.
Image 4.5: Detailed wiring diagram for connecting the magnetic lock, exit button, and power supply.
- Connect the magnetic lock to the NC (Normally Closed) and COM (Common) terminals on the power supply.
- Connect the exit button to the PUSH and GND (Ground) terminals on the power supply.
- Connect the AC power cable to the N (Neutral) and L (Live) terminals on the power supply.
- Ensure all connections are secure and insulated.
5. Operating Instructions
5.1 General Operation
Once installed and powered, the magnetic lock will engage, securing the door. To unlock the door:
- From Inside: Press the stainless steel exit button. The lock will disengage for the set duration (0-15 seconds), allowing the door to open.
- From Outside (Remote): Press the unlock button on the remote controller. The lock will disengage.
- From Outside (Tuya App): Use the Tuya App on your smartphone to remotely unlock the door.
5.2 Tuya App Integration
The power supply controller is compatible with the Tuya Smart App for remote access control.
- Download App: Download the Tuya Smart App from your smartphone's app store.
- Register/Login: Create an account or log in to your existing Tuya account.
- Add Device: Follow the in-app instructions to add a new device. The power supply controller should be discoverable when in pairing mode. Refer to the power supply manual for specific pairing mode activation.
- Remote Unlock: Once connected, you can use the app to remotely unlock the door from anywhere with an internet connection.
5.3 Remote Control Pairing
The kit includes two pre-paired remote controllers. If you need to add more remotes (up to 30 total) or re-pair existing ones:
- Enter Pairing Mode: Locate the pairing button or switch on the power supply controller (refer to the power supply diagram for '433 SET'). Press and hold it until an indicator light or sound confirms pairing mode.
- Press Remote Button: While the power supply is in pairing mode, press any button on the remote controller you wish to pair.
- Confirmation: The power supply will indicate successful pairing (e.g., a beep or light change).
- Exit Pairing Mode: The pairing mode will typically time out automatically or can be exited by pressing the pairing button again.
Image 5.1: One of the remote controllers for the access system.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your access control system.
- Clean Magnetic Lock: Periodically clean the face of the magnetic lock and the armature plate with a soft, dry cloth to ensure full contact and prevent debris buildup.
- Check Wiring: Inspect all wiring connections annually for any signs of wear, corrosion, or loose terminals. Tighten as necessary.
- Test Functionality: Regularly test the exit button, remote controls, and Tuya App functionality to ensure the system is operating correctly.
- Software Updates: Keep the Tuya Smart App updated to the latest version for optimal performance and security.
7. Troubleshooting
Refer to the table below for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Magnetic lock does not engage. | No power; loose wiring; faulty lock. | Check power supply connection; verify all wiring according to diagram; test lock with direct 12V power. |
| Door does not unlock with exit button. | Exit button wiring issue; faulty button. | Check exit button wiring to PUSH and GND terminals; test button continuity. |
| Remote control does not unlock door. | Remote not paired; remote battery low; interference. | Re-pair remote control (Section 5.3); replace remote battery; check for signal interference. |
| Tuya App cannot control the lock. | No internet connection; app not paired; power supply offline. | Ensure stable Wi-Fi connection; re-pair device in Tuya App; check power supply status. |
| Alarm beeper activates unexpectedly. | Door not fully closed/secured; sensor malfunction. | Ensure door is fully closed and armature plate makes full contact; inspect lock for damage. |
8. Safety Information
- This system is designed for low-voltage applications. Do not connect directly to high voltage without the power supply controller.
- Ensure all wiring is done according to local electrical codes and standards.
- Keep the power supply and magnetic lock away from water and excessive moisture.
- Do not attempt to modify or repair the components yourself. Contact support for assistance.
9. Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty terms, please refer to the product packaging or contact the seller directly. For technical support, troubleshooting assistance, or replacement parts, please contact YUHANUS customer service through the platform of purchase.
