Urageuxy WS0340
Urageuxy Wireless Weather Station WS0340 User Manual
Model: WS0340
Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Urageuxy Wireless Weather Station WS0340. This advanced weather station offers comprehensive monitoring of indoor and outdoor conditions, including temperature, humidity, wind speed and direction, rainfall, barometric pressure, and weather forecasts.
Package Contents
Before beginning installation, please ensure all components are present:
- Urageuxy Wireless Weather Station Indoor Console
- Integrated Outdoor Sensor Array
Setup
1. Outdoor Sensor Assembly and Placement
The outdoor sensor array includes an anemometer, rain collector, wind vane, and a high-precision Swiss T/H sensor. Mount the sensor in an open area, such as a garden, terrace, or on a roof/fence, ensuring it is free from obstructions that could affect wind or rain measurements. The sensor is solar-powered.
Image: Detailed view of the 6-in-1 outdoor sensor components, including the wind vane, anemometer, rain collector, and solar panel.
2. Indoor Console Placement
The indoor console features a clear VA display and can be placed on a table or mounted on a wall. Choose a location indoors, such as a bedroom, kitchen, or greenhouse, where the display is easily visible and within the wireless transmission range of the outdoor sensor.
Image: Examples of flexible mounting options for the indoor console (tabletop or wall-mounted) and the outdoor sensor (garden pole or roof edge).
3. Wireless Connection
The weather station transmits data wirelessly from the outdoor sensors to the indoor console. The transmission range is up to 100 meters in open areas and approximately 30 meters within buildings. Ensure the console and sensor are within this range for stable data transfer.
Image: Diagram illustrating the wireless connection between the outdoor sensor and the indoor console, highlighting the transmission range.
Operating Instructions
1. Display Overview
The VA display shows various weather parameters including indoor and outdoor temperature and humidity, wind speed (gust and average), wind direction, rainfall, barometric pressure, and a weather forecast icon. It also displays the current date, time, and moon phase.
Image: Front view of the Urageuxy Wireless Weather Station display, showing all active weather data points.
Image: The weather station display showing various weather parameters like temperature, humidity, wind, rain, and pressure.
2. Backlight Adjustment
The display features three levels of backlight brightness (100%, 75%, 50%) for optimal viewing in different lighting conditions. Refer to the console buttons for backlight control.
Image: Illustration of the three backlight brightness levels and the physical dimensions of the display unit.
3. Alarm Functions
The station includes various alarm functions, such as time alarms and high/low alarms for wind gusts/average, indoor/outdoor temperature, indoor/outdoor humidity, felt outdoor temperature, dew point, precipitation, and absolute pressure. Consult the full manual for detailed alarm setup procedures.
Maintenance
1. Sensor Replacement
The high-precision Swiss T/H sensor within the outdoor unit is replaceable. If temperature or humidity readings become inaccurate, consider replacing this component. Refer to the manufacturer's guidelines for purchasing and installing replacement sensors.
2. Cleaning
Periodically clean the outdoor sensor array to ensure accurate readings. Remove any debris from the rain collector and ensure the wind vane and anemometer spin freely. Wipe the indoor console with a soft, dry cloth.
Troubleshooting
1. No Data Displayed / Intermittent Readings
- Ensure the outdoor sensor and indoor console are within the specified wireless range.
- Check for any physical obstructions between the units.
- Verify that both units have power (solar for outdoor sensor, main power for indoor console).
2. Inaccurate Temperature/Humidity
- Confirm the outdoor sensor is not exposed to direct sunlight for prolonged periods or near external heat sources.
- If issues persist, the Swiss T/H sensor may need replacement.
3. Wind Readings Incorrect
- Ensure the outdoor sensor's anemometer and wind vane are free from obstructions and can rotate freely.
- Verify the sensor is mounted securely and level.
4. Rainfall Readings Incorrect
- Check the rain collector for debris or blockages.
- Ensure the sensor is level to allow proper water collection and drainage.
Specifications
| Feature | Detail |
|---|---|
| Model Number | WS0340 |
| Brand | Urageuxy |
| Connectivity Technology | Wi-Fi |
| Power Source | Solar Powered |
| Material | Plastic |
| Color | Grey |
| Display Type | VA LCD |
| Temperature Accuracy | ±0.3 °C |
| Humidity Accuracy | ±3 % |
| Outdoor Temperature Range | -40 °C to 60 °C |
| Upper Temperature Rating | 60 °C |
| Sensor Technology | Ultrasonic, Capacitive/Thermistor |
| Recommended Uses | Garden, Home |
| Specific Uses | Humidity, Dew Point, Wind Chill, Wind Speed |
| Special Features | Alarm, Moon Phase, Dew Point, Weather Resistant |
| Components Included | Indoor Console, Integrated Outdoor Sensors |
| Item Weight | 1.2 Kilograms |
| Package Dimensions | 45 x 29 x 18.5 cm |
| Batteries Included | No |
Warranty and Support
Information regarding product warranty and specific support contacts is not available in this document. Please refer to the product packaging or the manufacturer's official website for warranty details and customer support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.