1. Product Overview
This LED grille emblem is designed to enhance your vehicle's appearance with dynamic RGB color-changing illumination. It features a vibrant rainbow gradient effect and integrates seamlessly into the vehicle's front grille. The emblem is controlled via Bluetooth, offering multiple lighting modes and customization options.
Key Features:
- Dynamic Illumination: RGB color-changing capabilities with flow series effects.
- Bluetooth Control: Manage lighting modes, colors, and patterns via a connected device.
- Durable Construction: Weather-resistant design for lasting performance in various conditions.
- Customization: Offers solid colors, fading effects, and rainbow patterns.
- High Visibility: Bright, clear LED lighting for enhanced vehicle presence.
2. What's Included
Verify that all components are present in the package:
- LED Grille Emblem
- Mounting Hardware
- Controller Manual
- Wiring Harness
3. Installation Guide
This emblem is designed for direct replacement of the stock emblem with pre-wired connections. Professional installation is recommended.
Before You Begin:
- Ensure the vehicle's engine is off and the battery is disconnected to prevent electrical shorts.
- Read all instructions thoroughly before starting the installation.
- Confirm compatibility with your vehicle model (Charger, Challenger, 300, Grand Cherokee).
Tools Required:
- Basic hand tools (screwdrivers, wire strippers, crimpers)
- Zip ties or cable management clips
- Electrical tape or heat shrink tubing
Installation Steps:
- Remove Existing Emblem: Carefully remove the original grille emblem from your vehicle. This may involve unscrewing, unclipping, or gently prying it off. Refer to your vehicle's service manual for specific instructions.
- Prepare Mounting Area: Clean the area where the new LED emblem will be installed, ensuring it is free of dirt and debris.
- Mount the LED Emblem: Position the new LED grille emblem in place. Use the provided mounting hardware to secure it firmly to the grille.
- Connect Wiring: Route the emblem's wiring harness to a suitable power source. Typically, this involves connecting to a 12V power supply (e.g., parking lights, accessory power) and a ground point. Ensure all connections are secure and properly insulated using electrical tape or heat shrink tubing.
- Secure Wiring: Use zip ties or cable management clips to neatly secure the wiring, preventing it from interfering with moving parts or being exposed to damage.
- Reconnect Battery: Once all connections are made and secured, reconnect the vehicle's battery.
- Test Functionality: Turn on your vehicle's ignition and test the emblem's illumination and control functions.
Figure 3.1: SRT LED emblem installed on a vehicle's front grille, illuminated red, with vehicle headlights on.
Figure 3.2: Black Challenger with illuminated emblem and a view of the engine bay for wiring reference.
4. Operating Instructions
The LED grille emblem is controlled via a Bluetooth application on your smartphone.
Powering On:
The emblem will illuminate when connected to a power source, typically linked to your vehicle's accessory power or parking lights. Refer to your installation for specific power-on conditions.
Bluetooth Control:
- Download the App: Locate and download the recommended control application from your smartphone's app store. Refer to the included Controller Manual for the specific app name or QR code.
- Enable Bluetooth: Ensure Bluetooth is enabled on your smartphone.
- Pair Device: Open the control app. The app should automatically detect and connect to the LED grille emblem. If not, follow the app's instructions to manually pair.
- Customize Lighting: Use the app interface to select from various lighting modes, including solid colors, fading effects, and rainbow patterns. Adjust brightness and speed as desired.
Figure 4.1: Smartphone app interface for controlling the LED emblem's colors and effects.
Figure 4.2: Emblem displaying a purple illumination.
Figure 4.3: Emblem displaying a green illumination.
Figure 4.4: Emblem displaying a blue illumination.
Figure 4.5: Emblem displaying a red-to-orange gradient flow effect.
5. Maintenance
The LED grille emblem is designed for durability and minimal maintenance.
- Cleaning: Clean the emblem periodically with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the LED surface or finish.
- Inspection: Regularly inspect the emblem and its wiring for any signs of damage, loose connections, or wear. Ensure the emblem remains securely mounted.
- Weather Resistance: While weather-resistant, prolonged exposure to extreme conditions may affect performance. Ensure proper sealing of all electrical connections during installation.
6. Troubleshooting
If you encounter issues with your LED grille emblem, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Emblem not illuminating | No power, loose wiring connection, faulty LED, blown fuse. | Check power connections and ground. Ensure wiring is secure. Inspect vehicle's fuse box for a blown fuse. If issues persist, contact customer support. |
| Bluetooth connection issues | Bluetooth not enabled, app not running, emblem not in pairing mode, interference. | Ensure Bluetooth is active on your phone. Restart the control app. Power cycle the emblem (if possible). Move closer to the emblem. |
| Incorrect colors or patterns | App settings incorrect, controller malfunction. | Verify settings within the control app. Reset the emblem's controller if an option is available in the app or manual. |
| Emblem stopped working after a short period | Water intrusion, electrical short, component failure. | Inspect for signs of water damage or burnt wiring. Ensure all connections were properly sealed during installation. If internal component failure is suspected, contact customer support. |
7. Product Specifications
| Specification | Detail |
|---|---|
| Brand | Generic |
| Model Number | 3058496051 |
| Manufacturer Part Number | 7260 |
| Material | LED, Plastic |
| Exterior Finish | Illuminated |
| Fit Type | Universal |
| Auto Part Position | Front |
| Compatible Vehicle Types | 300 Hellcat, Car, Challenger, Charger, Jeep Grand Cherokee Srt, SRT8 Grand Cherokee |
| Item Dimensions | 7 x 1 x 2 inches |
8. Warranty and Customer Support
This product is typically covered by a limited manufacturer's warranty against defects in materials and workmanship. Please refer to the packaging or the seller's terms and conditions for specific warranty details and duration.
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact the retailer or manufacturer directly. Keep your proof of purchase for warranty validation.