Introduction
Thank you for choosing SEALIGHT S1 9007/HB5 LED Fog Light Bulbs. These high-performance LED bulbs are designed to provide superior illumination, enhancing visibility and safety during night driving or adverse weather conditions. Featuring a 1:1 design for easy installation and a fanless cooling system for quiet operation and extended lifespan, the S1 bulbs offer a significant upgrade over traditional halogen bulbs.
What's in the Box
- 2 x SEALIGHT 9007/HB5 LED Bulbs
- 1 x User Manual
Product Features
- Superior Brightness: Equipped with the latest chip technology, these bulbs deliver 32000LM of efficient lighting output, providing an 800% brighter and wider illumination range compared to standard halogen bulbs. This enhances visibility of road markings, obstacles, and other vehicles.
- 1:1 Design for Compatibility: The S1 9007/HB5 bulbs feature a 1:1 design, ensuring a perfect fit into the original bulb housing and factory plug. This design minimizes compatibility issues such as error messages, radio static, or flickering.
- Quick Installation: Designed for a perfect 1:1 fit, installation can typically be completed within 3 minutes without any modifications to your vehicle's sockets.
- Fanless Operation: The intelligent cooling driver eliminates the need for a fan, preventing fan failure and radio interference. This ensures a quiet and uninterrupted driving experience.
- Extended Lifespan: Constructed with a full aluminum body and dual built-in copper pipes, combined with IP67 waterproof capabilities, these bulbs are protected against water ingress and maintain brightness and clarity for up to 60,000 hours.
Specifications
| Attribute | Value |
|---|---|
| Brand | SEALIGHT |
| Model | S1 9007 |
| Specific Uses For Product | Fog Lights |
| Brightness | 32000 Lumen |
| Color Temperature | 6000K Cool White |
| Item Package Quantity | 2 Bulbs |
| Operating Life | 60000 Hours |
| Waterproof Rating | IP67 |
| Voltage | 12 Volts |
| Item Weight | 11.3 ounces |
| Product Dimensions | 4.72 x 4.33 x 3.27 inches |
Installation Guide
The SEALIGHT S1 9007/HB5 LED bulbs are designed for a quick and straightforward installation process. Always ensure your vehicle's engine is off and the lights are cool before beginning installation.
- Access the Bulb Housing: Locate the existing halogen bulb in your vehicle's headlight or fog light assembly. Depending on your vehicle model, you may need to remove a dust cover or access panel.
- Remove Old Bulb: Disconnect the electrical connector from the old bulb. Then, carefully twist or unclip the old bulb to remove it from the housing.
- Insert LED Bulb: Gently insert the new SEALIGHT S1 LED bulb into the housing. Ensure the LED chips are positioned correctly (typically at 3 and 9 o'clock positions for optimal beam pattern).
- Secure by Rotation: Twist the LED bulb clockwise until it is securely fixed in place within the housing.
- Connect the Plug: Connect the electrical plug from your vehicle to the connector on the LED bulb. Ensure a firm connection.
- Test Functionality: Turn on your vehicle's lights to test the new LED bulbs. Verify both low and high beam (if applicable) functionality and proper illumination.
- Replace Dust Cover/Panel: Once confirmed working, replace any dust covers or access panels removed earlier.
For vehicle compatibility, please refer to the fitment guide provided by SEALIGHT or consult your vehicle's manual. Some vehicles may require specific positioning of the LED chips for optimal beam pattern, which can be adjusted by rotating the bulb in the housing.
Operating Instructions
Once installed, the SEALIGHT S1 9007/HB5 LED bulbs operate like your vehicle's original fog lights. Simply activate your vehicle's fog light switch to turn them on or off. The bulbs are designed for instant full brightness upon activation.
The 6000K cool white light provides clear visibility, especially beneficial in foggy, rainy, or snowy conditions. The wide and far-reaching beam pattern helps illuminate the road effectively.
Maintenance
SEALIGHT S1 LED bulbs are designed for minimal maintenance due to their durable construction and fanless design. Regular maintenance includes:
- Cleaning: Periodically clean the exterior of your vehicle's headlight or fog light lenses to ensure maximum light output. Use a soft cloth and appropriate automotive cleaning solution.
- Inspection: Occasionally inspect the bulbs and wiring for any signs of damage or loose connections.
Do not attempt to disassemble the LED bulbs, as this may void the warranty and damage the product.
Troubleshooting
If you encounter issues with your SEALIGHT S1 LED bulbs, consider the following common troubleshooting steps:
- Bulbs Not Lighting Up:
- Check the electrical connection to ensure it is secure and properly seated.
- Verify the polarity of the connection. Some vehicles may require the connector to be flipped.
- Ensure the vehicle's fuse for the fog lights is not blown.
- Flickering or Error Messages:
- While SEALIGHT S1 bulbs are designed for high compatibility, some sensitive vehicle systems may still detect a difference from halogen bulbs. A CANbus decoder (sold separately) may be required to resolve flickering or dashboard error messages.
- Radio Interference:
- The fanless design significantly reduces interference. If interference occurs, ensure the bulb's wiring is not running too close to radio antenna cables.
- Incorrect Beam Pattern / Not Bright Enough:
- Ensure the LED chips on the bulb are oriented correctly (typically horizontal, at 3 and 9 o'clock positions) within the housing. Adjust by rotating the bulb if necessary.
- Verify that the bulb is fully seated and locked into the housing.
- High Beam Indicator Light Not Working (for some vehicles):
- Some vehicles complete the high beam indicator circuit through the low beams of the bulbs. LED bulbs may not draw enough power to complete this circuit, causing the dashboard indicator to not light up. This is generally not a functional issue with the high beams themselves, but rather a display issue.
If these steps do not resolve the issue, please contact SEALIGHT customer support for further assistance.
Safety Information
- Always wear appropriate safety gear, such as gloves, during installation.
- Ensure the vehicle's engine is off and the battery is disconnected before performing any electrical work.
- Do not touch the LED chips directly, as oils from your skin can reduce their lifespan.
- Keep the bulbs away from water and moisture during storage and installation, unless they are specifically designed for wet environments (these bulbs are IP67 rated).
- Do not look directly into the illuminated LED bulbs, as the intense light can cause eye strain or damage.
- Dispose of old bulbs responsibly according to local regulations.
Warranty and Support
SEALIGHT products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your SEALIGHT S1 9007/HB5 LED bulbs, please contact SEALIGHT customer service through their official website or the retailer where you purchased the product. Please have your purchase details and product model number ready when contacting support.
Visit the official SEALIGHT Store: SEALIGHT Store on Amazon
