Pard MT-2 Scope Mount User Manual

Introduction

This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your Pard MT-2 Scope Mount. Designed for use with Pard NV008S, NV008SP, and FD1 SA32 series devices, this mount is engineered for secure attachment to 11mm rails. Please read this manual thoroughly before use to ensure optimal performance and safety.

Setup and Installation

The Pard MT-2 Scope Mount is designed for straightforward installation. Follow these steps carefully:

1. Inspect Components: Verify that all components are present: the MT-2 mount and included screws.
2. Prepare the Rail: Ensure the 11mm rail on your device is clean and free of debris.
3. Position the Mount: Place the MT-2 mount onto the 11mm rail, aligning the mounting points.
4. Secure the Mount: Use the included screws to firmly attach the mount to the rail. Tighten the screws evenly to ensure a stable and level connection. Do not overtighten.
5. Attach Device: Once the MT-2 mount is securely fastened, attach your Pard NV008S, NV008SP, or FD1 SA32 series device to the mount according to its specific instructions.

Operating Instructions

The Pard MT-2 is a passive scope mount. Its primary function is to provide a stable platform for your Pard optical device. Once installed, no further operational steps are required for the mount itself. Ensure that the device attached to the mount is properly zeroed and calibrated according to its own user manual.

Maintenance

Proper maintenance will extend the lifespan of your MT-2 Scope Mount:

• Cleaning: Wipe the mount with a soft, dry cloth to remove dust and debris. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
• Inspection: Periodically check all screws and connection points to ensure they remain tight. Re-tighten if necessary, but do not overtighten.
• Storage: Store the mount in a dry environment, away from extreme temperatures and humidity.

Troubleshooting

If you encounter issues with your Pard MT-2 Scope Mount, consider the following:

• Mount is Loose: Ensure all mounting screws are properly tightened. Check for any obstructions between the mount and the rail.
• Device Not Level: Re-check the installation steps, ensuring the mount is seated correctly and screws are tightened evenly.
• Difficulty Attaching: Verify that your device is compatible with the MT-2 mount (NV008S, NV008SP, FD1 SA32 series).

For persistent issues not resolved by these steps, please contact Pard customer support.

Specifications

Warranty Information

The Pard MT-2 Scope Mount comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage resulting from misuse, unauthorized modification, accident, or improper installation. Please retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, warranty claims, or any questions regarding your Pard MT-2 Scope Mount, please contact Pard customer support. Refer to the official Pard website or your purchase documentation for the most current contact information.