LiberLive Portable Tankless Water Heater User Manual

1. Introduction

The LiberLive Portable Tankless Water Heater is designed to provide instant hot water for various outdoor and off-grid applications. Its compact and lightweight design makes it ideal for RV trips, camping, boat cabins, outdoor showers, and other activities where a reliable source of hot water is needed. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your water heater.

This image displays the LiberLive portable tankless water heater in black, shown with its gas regulator and shower head connected, ready for outdoor use.

This image illustrates the versatility of the water heater, showing its use for hot water during camping trips, outdoor showers, RV recreation, and pet bathing.

2. Safety Information

Your safety is paramount. Please read and understand all safety warnings and instructions before operating this appliance. Failure to follow these instructions may result in property damage, personal injury, or death.

• For Outdoor Use Only: This water heater is designed exclusively for portable outdoor use. Prolonged exposure to rain or water may damage internal components. Store in a dry area.
• Propane (LPG) Only: This appliance is designed for use with propane gas only. Do not attempt to use any other fuel.
• Gas Leak Checks: Always check for gas leaks before each use. Do not wrap tape between the gas regulator and the inlet pipe, as this can lead to poor sealing and gas leakage. Improper operation may cause the water heater to ignite unsafely.
• Overheating Protection: The unit is equipped with overheating protection, which automatically shuts off the water heater if the temperature exceeds 185°F (85°C).
• CSA Certified: This product is CSA certified and meets Canadian and U.S. safety standards, including flame failure protection, dry combustion protection, anti-freeze protection, high water pressure protection, and low water flow protection.
• Ventilation: Ensure adequate ventilation during operation to prevent carbon monoxide buildup.

This image visually represents the six integrated safety features of the water heater: overheat protection, flame failure protection, anti-freezing protection, dry combustion protection, low water flow protection, and high water pressure protection, ensuring safe operation.

3. Package Contents

Please verify that all items listed below are included in your package:

• 1 x Portable Tankless Water Heater
• 1 x 5 Feet Shower Head and Hose (with 5 spray patterns)
• 1 x 5 Feet CSA Certified Gas Regulator
• 1 x Hardware Packs
• 1 x Users Manual

This image displays the main accessories included with the water heater: the gas regulator and the complete shower head set.

4. Setup and Installation

Installation of your LiberLive portable water heater is designed to be quick and straightforward. Follow these steps for proper setup:

1. Hang the Water Heater: Use the integrated folding handle to hang the water heater securely in a well-ventilated outdoor area.
2. Install Batteries: Open the battery compartment and insert two D-size batteries (not included) according to the polarity indicators. These batteries power the ignition system.
3. Connect Water Inlet: Attach your cold water supply hose to the water inlet connection (typically marked 'Cold' or blue). Ensure a secure, leak-free connection. The unit requires only 3.6 PSI of water pressure to start.
4. Connect Water Outlet/Shower Kit: Connect the provided shower head and hose to the hot water outlet connection (typically marked 'Hot' or red).
5. Connect Gas Regulator: Attach the CSA certified gas regulator hose to the gas inlet connection on the water heater. Then, connect the other end of the gas regulator to your propane tank. Ensure all gas connections are tight and check for leaks using a soapy water solution before operation.

This diagram provides a clear, step-by-step guide for installing the water heater, detailing how to attach the water hose, shower kit, gas regulator, and insert the D-size batteries.

This image highlights the user-friendly aspects of the water heater, including its multi-function shower, convenient foldable handle, quick installation process, and power source from two D batteries.

5. Operating Instructions

Once installed and all connections are secure, you can begin operating your water heater:

• Turn on Water Supply: Open the cold water supply valve to allow water to flow through the unit. The water heater will only ignite when sufficient water flow is detected.
• Open Propane Supply: Slowly open the valve on your propane tank.
• Adjust Controls: Use the two control knobs on the front panel to adjust the gas flow and water flow. The Gas knob controls the heat output, and the Water knob controls the water flow rate. Adjusting these will affect the final water temperature.
• LED Digital Display: The integrated LED display will show the accurate water temperature, allowing you to fine-tune settings for your desired comfort level.
• Shower Head Operation: The included shower head features an ON/OFF button and 5 spray patterns (Spray, Soft, Rain, Surfing, Pulse) for versatile use.

This image provides a closer look at the water heater's design, showcasing its screw-free back shell, anti-backflow exhaust system, the gas and water control knobs on the front panel, and the compartment for two D-size batteries.

This image provides a detailed view of the multi-function shower head, highlighting its ON/OFF button, five adjustable spray patterns, and the 5-foot hose for convenient use.

6. Maintenance

Proper maintenance ensures the longevity and safe operation of your water heater:

• Storage in Cold Environments: If the water heater is to be stored in a cold environment or not in use for an extended period, it is crucial to drain the unit to prevent freezing and damage to the heat exchanger or water valve.
• Draining Procedure: Disconnect all water inlet and outlet pipes. Turn the drain valve on the lower right side of the water heater counterclockwise to open it and allow all water to drain completely.
• Disconnect Gas: Always disconnect the gas supply when the water heater is not in use.
• Clean Exterior: Wipe down the exterior with a damp cloth as needed. Do not use abrasive cleaners.

7. Troubleshooting

If you encounter issues with your water heater, refer to the following common problems and solutions:

• No Hot Water / Unit Not Igniting:
  • Ensure water supply is on and sufficient water pressure (minimum 3.6 PSI) is present.
  • Check that the propane tank valve is fully open and the tank contains propane.
  • Verify that the D-size batteries are correctly installed and have sufficient charge.
  • Confirm all gas and water connections are secure and leak-free.
• Inconsistent Water Temperature:
  • Adjust the gas and water flow knobs on the front panel to find the desired temperature balance.
  • Ensure consistent water pressure from your supply.
• Gas Odor / Flames Outside Unit:
  • IMMEDIATELY turn off the gas supply.
  • Check all gas connections for leaks using a soapy water solution. Bubbles indicate a leak.
  • Do not operate the unit if you detect a gas leak or see flames outside the combustion chamber. Contact qualified personnel for inspection and repair.
• Low Water Flow:
  • Check your water supply pressure.
  • Ensure the water flow knob on the unit is set to maximum.
  • Inspect the shower head for any blockages or mineral buildup.

8. Specifications

9. Warranty and Support

Your LiberLive Portable Tankless Water Heater comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures reliable performance under normal use conditions.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact LiberLive customer support. Refer to the contact information provided with your purchase documentation or visit the official LiberLive website for support details.