1. Introduction
This manual provides essential instructions for the safe assembly, operation, and maintenance of your Ingenuity Keep Cozy 3-in-1 Grow with Me Vibrating Baby Bouncer Seat & Infant to Toddler Rocker. This versatile product is designed to adapt as your child grows, offering three distinct modes: bouncer, rocker, and stationary seat.
The product is suitable for infants and toddlers from birth up to 40 pounds (18 kg), depending on the mode of use. Always refer to the specific weight limits for each mode.
Image 1.1: The Ingenuity Keep Cozy 3-in-1 Grow with Me Bouncer, Rocker, and Stationary Seat.
2. Important Safety Information
WARNING: Failure to follow these warnings and instructions could result in serious injury or death.
- Never leave child unattended. Always keep child in view.
- Always use the restraint system. Ensure the 5-point harness is properly secured around your child.
- Do not use this product once your child can sit up unassisted or attempts to climb out.
- This product is not intended for prolonged periods of sleep. If your child falls asleep, move them to a firm, flat sleep surface.
- Do not use this product on an elevated surface (e.g., a table). Always place it on the floor.
- Do not move or lift the product with the child in it.
- Discontinue use if any part is broken, torn, or missing. Contact customer support for replacement parts.
- Keep all assembly hardware and small parts out of reach of children.
- Adult assembly required.
3. Parts List
Before assembly, ensure all components are present:
- Frame components
- Seat pad
- Removable infant bolster
- Toy bar with detachable plush toy
- Vibration unit (requires 1 C battery, not included)
- Kickstand
Image 3.1: Key components of the Keep Cozy Bouncer, Rocker, and Stationary Seat.
4. Assembly Instructions
Follow these steps to assemble your Ingenuity Keep Cozy product. Refer to the included graphical instructions for detailed diagrams.
- Unpack Components: Carefully remove all parts from the packaging. Verify that all items listed in the 'Parts List' are present.
- Assemble Frame: Connect the frame components according to the manufacturer's instructions. Ensure all connections are secure and click into place.
- Attach Seat Pad: Drape the seat pad over the assembled frame. Secure the seat pad to the frame using the integrated straps or fasteners.
- Install Infant Bolster: For newborns, place the removable infant bolster into the seat pad. This provides additional support and comfort.
- Insert Vibration Unit: Locate the battery compartment for the vibration unit. Insert one C battery (not included) with correct polarity. Securely close the compartment. Place the vibration unit into its designated slot beneath the seat.
- Attach Toy Bar: Secure the toy bar to the designated slots on the frame. Ensure it is firmly attached and the plush toy is hanging securely.
- Check Harness: Ensure the 5-point harness is correctly threaded through the seat pad and is easily adjustable.
5. Operating Modes
The Ingenuity Keep Cozy offers three modes to accommodate your child's development:
Image 5.1: Overview of the three operating modes with their respective weight limits.
5.1. Bouncer Mode
This mode provides gentle bouncing motion. It is suitable for infants who cannot sit up unassisted.
- Maximum Weight: 20 lbs (9 kg)
- Activation: Ensure the kickstand at the rear is retracted, allowing the frame to bounce freely.
- Usage: Place your infant in the seat and secure the 5-point harness. The natural movements of the baby will create a gentle bouncing action.
Image 5.2: Infant in Bouncer Mode.
5.2. Rocker Mode
This mode allows for a soothing rocking motion. It is suitable for infants and toddlers.
- Maximum Weight: 40 lbs (18 kg)
- Activation: Ensure the kickstand at the rear is retracted, allowing the curved base to rock.
- Usage: Place your child in the seat and secure the 5-point harness. The seat can be gently rocked manually.
Image 5.3: Baby in Rocker Mode.
5.3. Stationary Seat Mode
This mode converts the product into a stable seat for toddlers.
- Maximum Weight: 40 lbs (18 kg)
- Activation: Extend the kickstand located at the rear of the frame until it locks into place. This stabilizes the seat and prevents rocking or bouncing.
- Usage: Your toddler can use this as a comfortable stationary seat. Always ensure the kickstand is fully engaged.
Image 5.4: Engaging the kickstand for Stationary Seat Mode.
Image 5.5: Toddler in Stationary Seat Mode.
6. Vibration Unit
The product includes a soothing vibration feature to help calm your child.
- Battery Requirement: The vibration unit requires 1 C battery (not included).
- Battery Installation: Locate the battery compartment on the vibration unit. Open it, insert the C battery ensuring correct polarity (+/-), and securely close the compartment.
- Operation: Use the switch on the vibration unit to turn the vibrations ON or OFF.
- Battery Safety: Always use new batteries of the recommended type. Do not mix old and new batteries or different types of batteries. Remove batteries if the product is stored for a long period or if batteries are depleted.
7. Care and Maintenance
Proper care ensures the longevity and hygiene of your Ingenuity Keep Cozy product.
- Frame: Wipe the frame with a soft, clean cloth and mild soap.
- Seat Pad/Bolster/Headrest:
- Remove from the frame.
- Fasten buckles on the seat restraint and seat pad.
- Fasten all hook-and-loop patches to the corresponding patch.
- Machine wash with cold water, gentle cycle.
- Do not use bleach.
- Tumble dry using low heat.
- Toy Bar and Toys: Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
Image 7.1: The seat pad and bolster are machine washable for convenience.
8. Troubleshooting
If you encounter issues with your Ingenuity Keep Cozy product, consider the following:
- Vibration not working: Check if the C battery is installed correctly with the right polarity. Replace the battery if it is old or depleted. Ensure the ON/OFF switch is in the 'ON' position.
- Product unstable: Ensure all frame connections are securely fastened. For stationary mode, verify the kickstand is fully extended and locked into place.
- Harness too tight/loose: Adjust the 5-point harness straps to fit your child snugly but comfortably. Refer to the assembly instructions for proper threading.
- Difficulty changing modes: Ensure no weight is on the seat when adjusting the kickstand. Gently push or pull the kickstand until it locks into the desired position.
If problems persist, refer to the 'Warranty and Support' section for contact information.
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | 17498 |
| Product Dimensions (Assembled) | 28.35"D x 19.69"W x 23.62"H (72 x 50 x 60 cm) |
| Item Weight | 5.98 lbs (2.71 kg) |
| Maximum Weight Recommendation | 40 lbs (18 kg) for Rocker/Stationary Seat; 20 lbs (9 kg) for Bouncer |
| Material Type | Metal, Plastic, Fabric (54% Plastic, 27% Metal, 19% Fabric) |
| Batteries Required | Yes, 1 C battery (for vibration unit, not included) |
| Additional Features | Grows with baby from infant to toddler, 2 reclining positions, removable infant bolster, detachable toy bar |
10. Warranty and Support
For warranty information, replacement parts, or customer support, please contact Ingenuity customer service. Details can typically be found on the product packaging or the official Ingenuity website.
Keep your purchase receipt as proof of purchase for any warranty claims.
