DEWINNER XFC-N
DEWINNER Bed with Base 160 x 200 cm - User Manual
Model: XFC-N
1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your DEWINNER Bed with Base 160 x 200 cm. This modern bed frame features a unique floating design with hidden legs and integrated smart LED lighting, enhancing both aesthetics and functionality. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.

Image 1.1: The DEWINNER Bed with Base, showcasing its floating design and integrated LED lighting.

Image 1.2: Visual comparison illustrating the hidden support legs of the floating bed design versus exposed legs of a regular bed, highlighting the design's benefit in avoiding accidental bumps.
2. Safety Information
Please observe the following safety precautions to prevent injury or damage to the product:
- Load Capacity: Do not exceed the maximum load capacity of 400 kg (approximately 880 lbs). Overloading can lead to structural failure and injury.
- Sharp Edges: Exercise caution during assembly and handling, as some components may have sharp edges.
- Assembly: Assemble the bed frame carefully and precisely according to the instructions. Improper assembly can result in instability or collapse.
- Children and Pets: Keep small children and pets away from the assembly area to prevent accidents with small parts or tools.
- Tools: Use only the provided tools or appropriate household tools for assembly.
3. Package Contents
Before beginning assembly, verify that all parts and tools listed below are present. If any items are missing or damaged, please contact customer support.
- Bed Frame Components (various metal parts)
- Metal Rib Bars / Slats
- LED Light Strip and Controller
- Assembly Hardware (screws, bolts, nuts, washers)
- Assembly Tools (e.g., Allen wrench, spanner)
- Instruction Manual (this document)
4. Setup and Assembly
The DEWINNER bed frame is designed for straightforward assembly, typically completed within an hour. Follow these steps carefully:
- Preparation: Clear an adequate space for assembly. Lay out all components on a soft, clean surface to prevent scratches.
- Frame Assembly: Begin by connecting the main frame sections using the provided hardware. Ensure all connections are secure but do not fully tighten bolts until the frame is fully assembled.
- Support Legs: Attach the hidden support legs to the designated points on the frame. Ensure protective pads are in place to prevent floor scratches.
- Slat Installation: Insert the metal rib bars (slats) into their respective slots or attach them to the frame. Ensure the crossbars with rubber tips are correctly positioned for silent movement.
- LED Strip Attachment: Carefully attach the LED light strip to the designated area under the bed frame, typically along the inner perimeter. Ensure the strip is securely adhered and the wiring is neatly routed.
- Final Tightening: Once the entire frame is assembled and stable, go back and fully tighten all bolts and screws.
- Placement: Carefully move the assembled bed frame to its desired location.

Image 4.1: Close-up view of key structural features including silent anti-slip mats, ribbed bar end mute devices, sturdy metal rib bars, and front/rear anti-slip devices, all contributing to the bed's stability and quiet operation.
5. Operating the LED Lighting
Your DEWINNER bed frame is equipped with advanced LED lighting offering extensive customization options.
5.1. Control Methods
- Remote Control: Use the included remote control to power on/off, change colors (60,000 options), adjust brightness, and select various lighting modes.
- Mobile Application: Download the dedicated mobile app (refer to the QR code or app store link provided in the LED kit packaging) to access advanced features. The app allows for precise color selection, brightness adjustment, music synchronization, microphone mode, and timing functions.
5.2. Lighting Features
- 60,000 Colors: Choose from a vast spectrum of colors to match your mood or room decor.
- Brightness Adjustment: Dim or brighten the lights to your preference.
- Music Sync Mode: The lights can pulsate and change color in rhythm with music played through your device or detected by the microphone.
- Microphone Mode: The lights react to ambient sounds detected by your phone's microphone (when using the app).
- Timing Mode: Set schedules for the lights to turn on or off automatically.

Image 5.1: Illustration of the LED lighting system, showing control via remote and mobile app, along with icons representing features like APP Control, Over 60000 Colors, Mic Mode, Music Sync, Timing Mode, and Bright Adjustment.
6. Maintenance
Proper maintenance will extend the life and appearance of your bed frame.
- Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the painted finish.
- Fasteners: Periodically check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain stability.
- LED Strip: Keep the LED strip free from dust. Do not attempt to remove or replace the LED strip unless instructed by customer support.
- Floor Protection: Ensure the protective pads under the support legs are intact to prevent floor scratches. Replace if worn.
7. Troubleshooting
If you encounter issues with your DEWINNER bed frame, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is wobbly or unstable. | Loose bolts or incorrect assembly. | Ensure all bolts are fully tightened. Review assembly instructions to confirm correct part placement. |
| Squeaking noises from the bed. | Loose connections; missing or displaced rubber tips on crossbars. | Tighten all connections. Verify that rubber tips on crossbars are properly seated. |
| LED lights not turning on. | Power connection issue; remote control battery dead; LED strip not properly connected. | Check power adapter connection. Replace remote control battery. Ensure LED strip is securely plugged into the controller. |
| Remote control or app not working. | Battery issue (remote); app not paired; interference. | Replace remote battery. Re-pair the app with the LED controller. Ensure no strong interference sources are nearby. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | XFC-N |
| Brand | DEWINNER |
| Size | 160 x 200 cm |
| Product Dimensions (L x W x H) | 78.74" x 62.99" x 7.87" (200 cm x 160 cm x 20 cm) |
| Color | Black |
| Finish Type | Painted |
| Form Factor | Floating |
| Special Feature | Integrated LED Lighting |
| Max Load Capacity | 400 kg (approx. 880 lbs) |
| Assembly Required | Yes |
| Item Weight | 46.2 pounds |

Image 8.1: Diagram illustrating the dimensions of the bed frame (160cm x 200cm) and the 20cm height of the bed frame, indicating the applicable mattress size.
9. Warranty and Support
DEWINNER products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official DEWINNER website. If you require assistance with assembly, have questions about operation, or need to report missing/damaged parts, please contact DEWINNER customer support through the contact information provided on the product packaging or the brand's official channels.
DEWINNER Store: Visit the DEWINNER Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.