Inkerma ACE-100 Laser Distance Meter User Manual (100m/328ft)

1. Introduction

Thank you for purchasing the Inkerma ACE-100 Laser Distance Meter. This device is designed for precise and efficient distance measurements, offering multiple functions for various applications. Please read this manual thoroughly before use to ensure safe and optimal operation.

1.1 Safety Information

WARNING: This product uses a Class II laser with a power output of less than 1mW. Do not stare directly into the laser beam or direct it at others. Avoid exposing eyes to direct or reflected laser light. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Always ensure the device is used in a safe manner and stored properly when not in use.

2. Package Contents

Verify that all items are present in your package:

1 x Inkerma ACE-100 Laser Distance Meter
2 x AA 1.5V Batteries
1 x Wrist Strap
1 x User Manual
1 x Storage Bag

Inkerma ACE-100 Laser Distance Meter package contents including device, batteries, strap, manual, and bag.

Figure 2.1: Included components of the Inkerma ACE-100 Laser Distance Meter.

3. Product Overview

The Inkerma ACE-100 features a robust design with a clear LCD screen and intuitive button layout for easy operation.

Inkerma ACE-100 Laser Distance Meter with laser beam active.

Figure 3.1: Front view of the Inkerma ACE-100 Laser Distance Meter.

3.1 Device Components

Diagram of Inkerma ACE-100 control panel with labels for each button and display area.

Figure 3.2: Control panel and display layout.

Power On / Measurement Button: Activates the device and initiates measurements.
Mode Selection (FUNC): Cycles through various measurement modes.
Switch Measurement Mode: Changes specific parameters within a mode.
Plus Sign / Switch Reference: Adds measurements or changes the measurement baseline.
Minus Sign / Switch Unit (m/ft/in/"'): Subtracts measurements or cycles through units.
100 Sets Data Storage: Accesses stored measurements.
Mute Function: Toggles the beep sound.
LCD Screen: Displays measurements, modes, and settings with backlighting.
Digital Angle Sensor: Provides real-time angle readings.

4. Setup

4.1 Battery Installation

The Inkerma ACE-100 uses 2 AA 1.5V batteries. To install or replace batteries:

Locate the battery compartment cover on the back of the device.
Gently slide the cover open.
Insert the 2 AA batteries, ensuring correct polarity (+/-).
Close the battery compartment cover securely.

Inkerma ACE-100 with battery compartment open, showing two AA batteries being inserted.

Figure 4.1: Battery installation.

4.2 Power On/Off

To power on: Press the Power On / Measurement button.
To power off: Press and hold the Power On / Measurement button for a few seconds. The device also features an auto-off function to conserve battery life.

5. Operating Modes

The Inkerma ACE-100 offers various measurement modes. Press the FUNC button to cycle through the available modes.

Diagram showing multiple measuring modes available on the Inkerma ACE-100, including single, continuous, area, volume, and Pythagorean methods.

Figure 5.1: Overview of multiple measuring modes.

5.1 Basic Measurement (Single/Continuous)

Single Measurement: Press the Power On / Measurement button once to emit the laser, then press again to take a single distance reading.
Continuous Measurement (Min/Max Tracking): In this mode, the device continuously measures distance. The display will show the current, minimum, and maximum distances. Press the Power On / Measurement button to start and stop continuous measurement.

5.2 Unit Switching

To switch between measurement units (Meters, Inches, Feet, Feet+Inches), press the Minus Sign / Switch Unit button repeatedly until the desired unit is displayed.

Inkerma ACE-100 displaying different units: meters, feet, inches, and feet+inches.

Figure 5.2: Unit switching functionality.

5.3 Measurement Reference

The device allows you to set the measurement baseline from the front or rear of the device. This is crucial for accurate measurements depending on where the device is placed. Press the Plus Sign / Switch Reference button to toggle between front and rear reference points.

5.4 Area Measurement

To calculate the area of a surface:

Select the Area Measurement mode using the FUNC button.
Measure the first side (length) by pressing the Power On / Measurement button.
Measure the second side (width) by pressing the Power On / Measurement button.
The device will automatically calculate and display the area.

Video 5.1: Demonstration of Area Measurement.

5.5 Volume Measurement

To calculate the volume of a space:

Select the Volume Measurement mode using the FUNC button.
Measure the length by pressing the Power On / Measurement button.
Measure the width by pressing the Power On / Measurement button.
Measure the height by pressing the Power On / Measurement button.
The device will automatically calculate and display the volume.

Video 5.2: Demonstration of Volume Measurement.

5.6 Pythagorean Measurement

The device supports various Pythagorean methods for indirect measurements, useful for inaccessible points.

Diagrams illustrating three different Pythagorean measurement methods on the Inkerma ACE-100.

Figure 5.3: Pythagorean measurement methods.

Select the desired Pythagorean mode using the FUNC button.
Follow the on-screen prompts to take the required measurements (e.g., hypotenuse, base).
The device will calculate the unknown side.

5.7 Angle Sensor

The integrated angle sensor provides real-time angle readings, useful for leveling or determining inclinations.

Inkerma ACE-100 displaying a 43.5 degree angle on its screen, held against an inclined surface.

Figure 5.4: Angle sensor in use.

5.8 Data Storage and Recall

The device can store up to 100 data groups. This allows you to save and review previous measurements.

Inkerma ACE-100 displaying multiple stored data sets on its screen, with a hand writing notes in a notebook.

Figure 5.5: Data storage and recall feature.

To save a measurement: Measurements are typically saved automatically.
To recall data: Press the 100 Sets Data Storage button to browse through stored records.
To delete data: Refer to the on-screen prompts when viewing stored data for deletion options.

5.9 Mute Function

The mute feature disables the beep sound during measurements, making it suitable for use in quiet environments. Press the Mute Function button to toggle the sound on or off.

6. Specifications

Feature	Detail
Model Number	ACE-100
Measuring Range	100m / 328ft
Accuracy	±1/8 inch
Units	M, In, Ft, Ft+In
Laser Class	Class II, <1mW
Battery Type	2 x AA 1.5V (included)
Data Storage	Up to 100 groups
Material	Plastic
Color	Green
Item Weight	240 g
Parcel Dimensions	16.9 x 11.9 x 4.9 cm

7. Maintenance

7.1 Care and Cleaning

Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Keep the laser lens clean to ensure accurate measurements. Use a soft cloth or cotton swab.
Store the device in its protective bag when not in use to prevent damage.

7.2 Battery Care

Remove batteries if the device will not be used for an extended period to prevent leakage.
Replace batteries when the low battery indicator appears on the display.

8. Troubleshooting

If you encounter issues with your Inkerma ACE-100, refer to the following common solutions:

Device does not power on: Check if batteries are installed correctly and have sufficient charge. Replace if necessary.
Inaccurate measurements: Ensure the laser lens is clean. Verify the correct measurement reference point is selected. Ensure the target surface is suitable for laser reflection.
Display is dim or unreadable: Check battery level. The LCD has backlighting for low-light conditions.
No sound: Check if the mute function is activated.

For further assistance, please contact Inkerma customer support.

9. Warranty and Support

Inkerma products are manufactured to high-quality standards. For information regarding warranty coverage and customer support, please refer to the documentation included with your purchase or visit the official Inkerma website.

For any questions or technical support, please contact our customer service team.

Inkerma ACE-100