1. Introduction
Thank you for choosing the STRICH SKT-02 Z-Style Piano Keyboard Stand. This heavy-duty, adjustable, and portable stand is designed to provide stable support for 54, 61, and 88-key electric pianos and keyboards. Please read this manual carefully before assembly and use to ensure proper setup and safe operation.
2. Safety Information
- Ensure all components are securely fastened before placing any instrument on the stand.
- Do not exceed the maximum weight capacity of 250 lbs (113.4 kg).
- Always loosen adjustment knobs before attempting to change the stand's height or width to prevent damage or injury.
- Use the provided safety straps and keyboard clamps to secure your instrument firmly to the stand.
- If using wheels, ensure they are locked when the instrument is in use to prevent accidental movement.
- Keep small parts away from children to avoid choking hazards.
3. Package Contents
Verify that all parts are present before beginning assembly:
- Main Z-frame components
- Adjustable crossbar
- 4 x Adjustable keyboard clamps
- Sponge padding for contact surfaces
- 2 x Safety straps
- Built-in headphone hook
- 4 x Non-slip foot pads
- 4 x Lockable wheels
- Assembly hardware (knobs, screws)
4. Setup and Assembly
Follow these steps to assemble your STRICH SKT-02 keyboard stand:
- Unfold the Z-Frame: Carefully unfold the main Z-frame components. Ensure they are stable on a flat surface.
- Attach Foot Pads or Wheels: Decide whether to use the non-slip foot pads or the lockable wheels. Screw them into the bottom of the stand's legs. If using wheels, ensure they are locked after installation for stability.
Figure 2: Choose between non-slip foot pads for stationary use or lockable wheels for mobility. Both options screw into the base of the stand. - Assemble the Crossbar: Attach the adjustable crossbar between the two Z-frame sections. Loosen the knobs on the crossbar, slide it into position, and then tighten the knobs to secure it. This allows for width adjustment.
Video 1: This video demonstrates the assembly of the crossbar and how to adjust the stand's width by loosening and tightening the knobs. - Adjust Height: Loosen the pull-type knobs on the vertical sections of the Z-frame. Adjust the height to your desired playing position (seated or standing) and then firmly tighten the knobs.
Figure 3: The pull-type knob mechanism allows for quick and secure height adjustments. Always loosen before adjusting and tighten firmly after. - Attach Keyboard Clamps and Padding: Install the four adjustable keyboard clamps onto the top support bars. Apply the sponge padding to the contact surfaces of the clamps to protect your instrument.
Figure 4: The four adjustable clamps, equipped with sponge padding, provide a secure and protective grip for your keyboard. - Install Safety Straps: Secure the two safety straps to the stand and around your keyboard. These straps provide additional 360° protection against accidental dislodgement.
Figure 5: The safety straps are crucial for ensuring your instrument remains firmly in place during use. - Attach Headphone Hook: The built-in headphone hook can be attached to either side of the stand for convenient storage.
Figure 6: The headphone hook provides a practical storage solution for your headphones, keeping them within reach. - Final Check: Double-check all connections and adjustments to ensure the stand is stable and your instrument is securely mounted.
Video 2: This video provides a comprehensive demonstration of the stand's assembly, adjustments, and features, including the dual-tier setup.
5. Operating Instructions
5.1 Adjusting Height and Width
The STRICH SKT-02 stand features a slide-and-lock mechanism for easy adjustments:
- To adjust the height, loosen the pull-type knobs on the vertical posts of the Z-frame. Slide the posts up or down to the desired height, then firmly tighten the knobs.
- To adjust the width, loosen the knobs on the horizontal crossbar. Slide the two main Z-frame sections closer or further apart to achieve the desired width for your keyboard, then firmly tighten the knobs.
Note: Always ensure all knobs are securely tightened after making any adjustments to maintain stability.
5.2 Securing Your Instrument
Utilize the enhanced safety features for maximum instrument protection:
- Position your keyboard on the stand, ensuring it rests evenly on the padded clamps.
- Adjust the 4 keyboard clamps to snugly fit the sides of your instrument.
- Fasten the 2 safety straps around your keyboard and the stand's frame, ensuring they are taut but not overly tight to avoid damaging the instrument.
6. Maintenance
- Regularly inspect all screws, knobs, and connections for tightness. Tighten as needed.
- Clean the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Check the condition of the sponge padding and safety straps periodically. Replace if worn or damaged.
- Store the stand in a dry environment when not in use.
7. Troubleshooting
7.1 Stand is Wobbly
- Ensure all adjustment knobs (height and width) are fully tightened.
- Verify that the stand is on a flat, level surface. Adjust the individual foot pads if necessary to compensate for uneven floors.
- If using wheels, ensure all four wheels are locked.
7.2 Keyboard Slides on Stand
- Confirm that the keyboard clamps are properly adjusted and snugly fit the instrument.
- Check that the sponge padding on the clamps is intact and providing sufficient grip.
- Ensure the safety straps are correctly installed and tightened around the keyboard.
8. Specifications
| Feature | Detail |
|---|---|
| Model | SKT-02S |
| Material | Iron Metal (Thickened Coating) |
| Tube Diameter | 1.4 inches |
| Color | Black |
| Max Weight Capacity | 250 lbs (113.4 kg) |
| Adjustable Width | 21.7 - 35 inches (56 - 89 cm) |
| Adjustable Height | 23.6 - 36.6 inches (59 - 84.7 cm, including wheels/foot pads) |
| Compatibility | 54, 61, and 88-key Electric Pianos/Keyboards |
| Special Features | Adjustable Height, Heavy Duty, Z-Style, Headphone Hook, Non-slip Foot Pads, Lockable Wheels, Keyboard Clamps, Sponge Padding, Safety Straps |
| Assembly Required | Yes |
| Item Weight | 8 Kilograms |
| Item Dimensions (L x W x H) | 56 x 41 x 59 Centimetres (folded) |
9. Warranty and Support
STRICH stands by its products. If you encounter any issues or require assistance, please contact our dedicated customer service team for prompt and professional support. Refer to your purchase documentation for specific warranty details.
