Fenge 2-Tier Wooden Monitor Stand with Drawers (90cm Width)

Introduction

Thank you for choosing the Fenge 2-Tier Wooden Monitor Stand. This product is designed to enhance your workspace by providing an ergonomic monitor height and efficient storage solutions. Its 2-tier design with integrated drawers helps organize your desktop, creating a cleaner and more productive environment. The stand also promotes a better posture by elevating your monitor to an optimal viewing level.

Safety Guidelines

• Ensure the monitor stand is placed on a stable, level surface to prevent tipping.
• Do not exceed the maximum load capacity of 25 kg (55 lbs).
• Keep small parts away from children during assembly.
• Avoid exposing the stand to excessive moisture or direct heat sources.
• Regularly check all connections and components to ensure they remain secure.

Package Contents

Please verify that all components are present before beginning assembly:

• 1x Main Wooden Board (90cm x 23.5cm)
• 2x Fabric Drawers
• 4x Non-slip Pads
• Assembly Hardware (screws, tools if applicable)

Setup and Assembly

The Fenge monitor stand requires simple assembly. Follow these steps for proper setup:

1. Prepare the Base: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Attach Non-slip Pads: Locate the four non-slip pads. Peel off the adhesive backing and firmly attach one pad to each corner on the underside of the monitor stand's base. These pads provide stability and protect your desk surface.
3. Assemble the Structure: If the stand's frame is not pre-assembled, follow the included diagram to connect the side supports to the main wooden board using the provided hardware. Ensure all screws are tightened securely but do not overtighten.
4. Insert Drawers: Slide the two fabric drawers into their designated slots on the lower tier of the stand.
5. Position the Stand: Place the assembled monitor stand on your desk in the desired location.
6. Place Your Monitor: Carefully place your monitor on the top surface of the stand. Ensure it is centered and stable.

Operating Instructions

The Fenge monitor stand is designed for intuitive use to maximize your desk space and comfort.

• Monitor Placement: Place your monitor(s) on the top surface. The stand is designed to support various monitor sizes and can even accommodate dual monitor setups within its 90cm width.
• Keyboard and Mouse Storage: Utilize the open space beneath the top tier to neatly store your keyboard, mouse, and other peripherals when not in use, freeing up valuable desk space.
• Drawer Organization: Use the two integrated fabric drawers to store office supplies, cables, small gadgets, and personal items. This keeps your desktop clutter-free and your essentials within easy reach.
• Ergonomic Positioning: The 14.2cm height of the stand helps elevate your monitor to eye level, promoting a more ergonomic posture and reducing strain on your neck and shoulders during long working hours.

Care and Maintenance

To ensure the longevity and appearance of your Fenge monitor stand, follow these simple care instructions:

• Cleaning: Wipe the wooden surfaces with a soft, damp cloth. For stubborn stains, use a mild wood cleaner. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Spills: Immediately wipe up any spills to prevent water damage or staining, as the MDF material is resistant but not impervious to prolonged liquid exposure.
• Dusting: Regularly dust the stand with a dry, soft cloth to prevent dust buildup.
• Drawer Care: The fabric drawers can be spot cleaned with a damp cloth and mild soap if necessary. Allow them to air dry completely before reinserting.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration of the wood finish.

Troubleshooting

If you encounter any issues with your Fenge monitor stand, please refer to the following common problems and solutions:

• Stand is Unstable:
  • Ensure all assembly screws are tightened.
  • Verify that the non-slip pads are securely attached and the stand is on a flat surface.
  • Check that the weight placed on the stand does not exceed the maximum load capacity.
• Drawers are Sticking or Not Sliding Smoothly:
  • Ensure the drawers are inserted correctly and are not overloaded.
  • Check for any obstructions within the drawer slots.
• Damage During Shipping:
  • If any parts are damaged upon arrival, please contact customer support immediately for assistance.

Product Specifications

Warranty and Customer Support

This Fenge monitor stand comes with a 12-month quality guarantee from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.

If you have any questions, require assistance with assembly, or need to report a defect, please contact our customer support team. Provide your purchase details and a description of the issue for prompt service.

Customer Support Contact:
Please refer to your purchase platform or the Fenge official website for the most up-to-date contact information.