Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your IMIPAW PET Automatic Cat Feeder. Please read this manual thoroughly before using the device to ensure proper function and longevity.
Figure 1: Key Features of the Automatic Pet Feeder. This image summarizes the main functionalities including timed feeding, meal frequency, portion control, and capacity.
Product Overview
The IMIPAW PET Automatic Cat Feeder is designed to provide reliable and precise meal dispensing for your pet. It features a 3L food capacity, programmable timed feeding, and precise portion control.
Components
- Main Feeder Unit (with control panel and food dispenser)
- Removable Food Tank
- Food Bowl
- Desiccant Bag (for food freshness)
- 5V DC Power Adapter
- User Manual
Figure 2: Main Feeder Unit. This image shows the complete automatic cat feeder, including the transparent food tank, control panel, and the food bowl receiving dispensed kibble.
Setup
- Unpack the Feeder: Carefully remove all components from the packaging.
- Install Batteries (Optional but Recommended): For backup power during outages, insert 3 x D size alkaline batteries (not included) into the battery compartment located at the bottom of the main unit.
Figure 3: Dual Power Supply Configuration. The feeder can be powered by the 5V DC adapter or 3x D size batteries, ensuring continuous operation even during power outages.
- Connect Power: Plug the 5V DC power adapter into the feeder and then into a wall outlet.
- Install Desiccant Bag: Open the lid of the food tank. Locate the desiccant compartment on the underside of the lid. Insert the provided desiccant bag to help keep the food fresh and dry.
Figure 4: Airtight Lid with Desiccant. The desiccant bag helps maintain food freshness by absorbing moisture, preventing spoilage.
- Fill Food Tank: Fill the transparent food tank with dry kibble. Ensure the kibble size is between 0.07 to 0.4 inches (2-10mm) to prevent jamming. Securely close the lid.
Figure 5: Double Rotor Design for Smooth Food Discharge. This design ensures consistent and clog-free dispensing of various dry food types, including dry, mixed, and freeze-dried kibble.
- Attach Food Bowl: Place the food bowl in front of the dispenser outlet. Ensure it is properly aligned.
- Optional Height Increase: The feeder comes with 0.2-inch non-slip feet. For additional height (1-2 inches), separate height increase foot pads can be purchased.
Figure 6: High Foot Design, Safe and Stable. This image shows the feeder with optional heightened feet, providing a more comfortable eating position for some pets.
Operating Instructions
Control Panel Overview
- SET Button: Press and hold for 3 seconds to set the current time. Press shortly to confirm settings and move to the next step.
- LOCK Button: Press for 3 seconds to open and close the lock. The control buttons and screen automatically lock after 30 seconds of standby.
- +/- Buttons: Use to increase or decrease values (e.g., time, portions). Press both together to dispense a portion of food immediately. Press the '+' button for 6 seconds to restore factory settings.
Programming Feeding Schedule
- Set Current Time:
- Press and hold the SET button for 3 seconds until the hour display flashes.
- Use the + or - buttons to adjust the hour.
- Press SET to confirm and move to minutes. Adjust minutes using + or -.
- Press SET to confirm and exit time setting.
- Program Meals:
- After setting the time, press SET briefly to enter meal programming mode. The meal number (e.g., "M1") will flash.
- Use + or - to select the meal number (1-6 meals per day).
- Press SET to confirm. The hour for the selected meal will flash.
- Adjust the hour using + or -, then press SET to confirm.
- Adjust the minutes using + or -, then press SET to confirm.
- The portion size will flash. Adjust the number of portions (1-20 portions per meal, approx. 8g/serving) using + or -.
- Press SET to confirm the portion size.
- Repeat for additional meals (up to 6). If you do not wish to set all 6 meals, simply exit by pressing and holding the LOCK button.
Figure 7: Automatic Pet Feeding Schedule. This image illustrates how to program multiple meals with specific times and portion sizes for your pet's dietary needs.
- Manual Feeding: To dispense a single portion of food immediately, press the + and - buttons simultaneously.
Maintenance
Regular cleaning ensures the hygiene and proper functioning of your pet feeder.
- Disassemble for Cleaning:
- Ensure the feeder is unplugged from the power source.
- Remove the food bowl.
- Press the release buttons on the side of the main unit to detach the food tank.
- Remove the lid from the food tank.
- Cleaning Instructions:
- The food tank, lid, and food bowl can be hand-washed with mild soap and water. Rinse thoroughly.
- DO NOT wash the main feeder base. Wipe the base with a damp cloth only.
- Ensure all parts are completely dry before reassembling.
Figure 8: Removable for Easy Cleaning. The food tank and bowl are detachable for convenient hand washing, while the base should only be wiped clean.
- Replace Desiccant Bag: Replace the desiccant bag every 2-4 weeks, or as needed, to maintain optimal food freshness.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Feeder not dispensing food. | Food tank empty; kibble jammed; power issue. | Refill food tank. Check kibble size (0.07-0.4 inches). Ensure power adapter is connected or batteries are installed correctly. |
| Display screen is off. | No power; screen locked. | Check power connection. Press and hold the LOCK button for 3 seconds to unlock the screen. |
| Incorrect meal times/portions. | Incorrect programming. | Refer to "Programming Feeding Schedule" section to re-program. Consider restoring factory settings by holding '+' for 6 seconds. |
| Food not staying fresh. | Desiccant bag needs replacement; lid not sealed. | Replace desiccant bag. Ensure the lid is securely locked. |
If the equipment is malfunctioning or damaged, please do not attempt to repair it yourself. Contact the seller immediately for assistance.
Specifications
- Model Name: DU3L-KE
- Brand: IMIPAW PET
- Capacity: 3 Liters (approx. 12 cups)
- Material: BPA-free ABS
- Power Supply: 5V DC Adapter; 3 x D size alkaline batteries (not included)
- Feeding Schedule: 1-6 meals per day
- Portion Control: 1-20 portions per meal (approx. 8g/serving)
- Recommended Kibble Size: 0.07 to 0.4 inches (2-10mm)
- Item Dimensions (LxWxH): 6.9 x 6.9 x 1.1 inches (base dimensions, overall unit dimensions are larger)
- Item Weight: 2.5 pounds
Warranty and Support
The IMIPAW PET Automatic Cat Feeder comes with a 1-Year Warranty from the date of purchase.
For any questions, technical support, or warranty claims, please contact IMIPAW PET customer service. Refer to the contact information provided in your product packaging or visit the official IMIPAW PET store on Amazon.
Note: Do not attempt to repair the device yourself. Unauthorized repairs may void your warranty.