Asrcs X13 Dog Training Collar User Manual

1. Introduction

Thank you for choosing the Asrcs X13 Dog Training Collar. This device is designed to assist in training your dog through various humane and effective modes. It features a remote control, an IPX7 waterproof receiver collar, and four distinct training modes: beep, vibration, adjustable shock, and a flashlight. This manual provides essential information for safe and effective use, ensuring a positive training experience for both you and your dog.

2. Important Safety Information

Please read all instructions carefully before using the training collar. Improper use can lead to physical or psychological harm to your dog.

• Not for Aggressive Dogs: Do not use this product on aggressive dogs. If your dog is aggressive, consult a professional dog trainer.
• Skin Irritation: Avoid leaving the collar on the dog for more than 12 hours per day. Prolonged wear or improper fit can cause skin irritation or pressure necrosis. Regularly check the contact area for signs of redness or sores.
• Proper Fit: The collar should fit snugly but not too tightly. You should be able to fit two fingers comfortably between the collar and your dog's neck.
• Supervision: Always supervise your dog during training sessions.
• Age and Health: This collar is suitable for dogs weighing 8-150 lbs. Do not use on puppies under 6 months old or dogs with health issues. Consult a veterinarian if unsure.
• Humane Use: The shock mode should be used as a last resort and at the lowest effective level. Prioritize beep and vibration modes for training.

3. Package Contents

Verify that all items are present in your package:

• 1 x Handheld Remote
• 1 x Receiver Collar
• 1 x Adjustable Collar Strap
• 1 x Test Light Tool
• 1 x 2-in-1 USB Charging Cable
• 1 x Wrist Strap
• 1 x User Manual (this document)
• 1 x USB C to USB Adapter
• 2 x Long Contact Points
• 2 x Short Contact Points
• 4 x Conductive Silicone Caps

4. Product Overview

4.1 Components

The Asrcs X13 Dog Training Collar system consists of a remote transmitter and a receiver collar.

Image: The Asrcs X13 remote control and receiver collar. The remote features a digital display and control buttons, while the receiver is a compact unit attached to an adjustable collar strap.

4.2 Training Modes

The system offers four distinct training modes to address various behavioral needs:

• Beep Mode: Emits an audible tone.
• Vibration Mode: Provides a tactile vibration (0-9 adjustable levels).
• Shock Mode: Delivers a static stimulation (0-99 adjustable levels).
• Flashlight: Built-in light for visibility in low-light conditions.

Image: A person training a German Shepherd, illustrating the four available training modes: Beep, Vibrate (0-9 levels), Shock (0-99 levels), and Flashlight.

5. Setup

5.1 Charging the Devices

Before initial use, fully charge both the remote and the receiver collar.

1. Connect the 2-in-1 USB charging cable to both the remote and the receiver collar.
2. Plug the USB cable into a standard USB power adapter (not included), power bank, or computer USB port.
3. Charging typically takes approximately 2 hours. The indicator lights will change to show a full charge.

Battery Life: The remote offers up to 180 days of standby time, and the receiver collar offers up to 35 days of standby time on a single charge.

Image: Visual representation of the remote and receiver charging via USB, highlighting the long standby times (180 days for remote, 35 days for receiver) and the 2-hour fast charging capability.

5.2 Attaching Contact Points and Silicone Caps

Select the appropriate contact points (long for thick-coated dogs, short for thin-coated dogs) and attach the conductive silicone caps for comfort and safety.

5.3 Fitting the Receiver Collar

Proper fit is crucial for the effectiveness of the collar and your dog's comfort.

1. Place the receiver collar around your dog's neck, ensuring the contact points are positioned underneath, touching the skin.
2. Adjust the strap so it is snug but not tight. You should be able to fit two fingers comfortably between the collar and your dog's neck.
3. Trim any excess strap if necessary, ensuring the cut end is sealed to prevent fraying.

The adjustable collar strap fits dogs from 8 lbs to 150 lbs, with a neck circumference range of 6 to 28.5 inches.

Image: A visual guide demonstrating the adjustable nature of the collar, suitable for a wide range of dog sizes from 8 lbs to 150 lbs, with a collar length of 6-28.5 inches.

5.4 Pairing the Remote and Receiver

The remote and receiver are typically pre-paired. If re-pairing is needed:

1. Turn on the remote and the receiver collar.
2. Press and hold the power button on the receiver collar until the indicator light flashes rapidly.
3. Within 10 seconds, press a mode button (Beep, Vibration, or Shock) on the remote. The receiver light will stop flashing, indicating successful pairing.
4. If training multiple dogs, repeat the process for each additional receiver, selecting a different channel (A, B, C, D) on the remote for each dog. The remote supports up to four dogs.

6. Operating the Device

6.1 Remote Control Functions

The remote control allows you to activate the training modes from a distance.

• Mode Buttons: Dedicated buttons for Beep, Vibration, and Shock modes.
• Level Adjustment: Use the up/down buttons to adjust vibration (0-9) and shock (0-99) levels.
• Channel Selection: Switch between channels (A, B, C, D) to control multiple receiver collars.
• Flashlight Button: Activates the built-in flashlight.
• Keypad Lock: A one-key locking feature prevents accidental activation of modes.

The remote has an effective range of up to 2000 feet (approximately 600 meters) in open areas.

Image: The remote control in use, demonstrating its 2000ft range for outdoor training and the one-key locking mechanism to prevent unintended operations.

6.2 Waterproof Receiver

The receiver collar is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This allows your dog to play in the rain, splash, or even swim without damaging the device.

Image: A dog swimming with the waterproof receiver collar, illustrating its IPX7 rating. Below, a dog wearing the collar is shown with the remote's flashlight function activated in the dark.

7. Maintenance

Proper maintenance ensures the longevity and performance of your training collar.

• Cleaning: Clean the receiver collar and remote with a damp cloth. The manufacturer specifies 'Clean with water' for the collar. Ensure contact points are free of dirt and debris.
• Storage: Store the device in a cool, dry place when not in use.
• Battery Care: Recharge the batteries regularly, even if not in frequent use, to maintain battery health.
• Inspect for Wear: Periodically check the collar strap and contact points for any signs of wear or damage. Replace components if necessary.

8. Troubleshooting

If you encounter issues with your Asrcs X13 Dog Training Collar, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Asrcs customer support for further assistance.

9. Specifications

10. Customer Support

For any questions, concerns, or technical assistance regarding your Asrcs X13 Dog Training Collar, please refer to the contact information provided with your purchase or visit the official Asrcs website. Our customer support team is available to help you.