VEGA VHTH-37

Vega OG 15 in 1 All Rounder Grooming Set User Manual

Model: VHTH-37

Introduction

Welcome to the user manual for your new Vega OG 15 in 1 All Rounder Grooming Set. This comprehensive guide provides detailed instructions on how to set up, operate, maintain, and troubleshoot your grooming device. Please read this manual carefully before first use to ensure safe and optimal performance of your product. Keep this manual for future reference.

Safety Information

WARNING: To reduce the risk of electric shock, injury, or damage to the appliance, always follow these basic safety precautions.

Product Overview

Components and Features

The Vega OG 15 in 1 All Rounder Grooming Set is designed for versatile grooming needs, featuring a robust set of attachments and advanced functionalities.

Vega OG 15 in 1 Grooming Set with all attachments

Figure 1: The Vega OG 15 in 1 All Rounder Grooming Set, showcasing the main trimmer unit and its comprehensive array of 7 blade attachments and 8 comb guides for various grooming applications.

Diagram of face and body grooming attachments

Figure 2: Detailed diagram illustrating the various face and body grooming attachments, including precision trimmer for moustache, face shaver, nose & ear hair trimmer, body groomer, ball trimmer, U blade, T blade, and their corresponding comb guides.

Examples of blade attachment applications

Figure 3: Visual examples demonstrating the application of different blade attachments for beard trimming, mustache trimming, ear trimming, ball trimming, body trimming, and nose trimming.

Close-up of the 40 length settings rotary knob

Figure 4: Close-up view of the rotary knob, highlighting the 40 precise length settings available for customized grooming.

Setup

Initial Charging

Before using your Vega OG Grooming Set for the first time, ensure it is fully charged. Connect the provided Type-C USB cable to the trimmer and a suitable power source. The charging time is approximately 180 minutes for a full charge, providing up to 180 minutes of runtime.

Battery runtime and charging time illustration

Figure 5: Illustration showing the 180 minutes runtime and 180 minutes charging time of the long-lasting Li-ion battery.

Attaching Blades and Combs

To attach a blade or comb, align it with the trimmer head and gently press until it clicks into place. To remove, gently pull the attachment away from the trimmer head. Ensure the trimmer is switched off before changing attachments.

Operating Instructions

General Operation

To turn the trimmer ON or OFF, press the power button located on the front of the device. The trimmer also features a travel lock to prevent accidental activation. Consult the device for specific travel lock activation/deactivation methods.

Trimming Beard/Moustache

  1. Ensure the trimmer is fully charged.
  2. Rotate the knob to set the desired comb height (0.5mm-20mm).
  3. Press the switch ON.
  4. Place the flat top of the trimmer comb against the skin and move it against the direction of hair growth.
  5. For defined beard/moustache lines, hold the personal groomer with the precision trimmer blade facing you. Start at the edge of the beard or moustache line and gently lower the trimmer blade onto your skin.

Using the Body Shaver Blade

  1. Attach the body shaver head onto the trimmer.
  2. Shave comfortably below the neck. The unique skin protector system guards sensitive body areas, allowing for a closeness of 0.5mm.
  3. Tip: Use one hand to stretch the skin while the other operates the shaver. This facilitates easier hair trimming.

Using Nose/Ear Hair Trimmer

  1. Attach the nose trimmer attachment.
  2. Gently insert the groomer into the nostril or ear.
  3. Tip: Avoid inserting the unit more than 6mm into your nostril or ear. Gently move the groomer around the nostril or ear to trim hair.

Using the Face Shaver Blade

  1. Attach the face shaver attachment onto the trimmer.
  2. Shave comfortably on the face. The skin protector system guards sensitive facial areas, allowing for a closeness of 0.5mm.

Using the Ball Trimmer Blade

  1. Attach the ball trimmer attachment onto the trimmer.
  2. This trimmer features ceramic & stainless-steel blades with 1 adjustable comb (1mm, 2mm, 3mm, 4mm, 5mm, 6mm) for trimming intimate parts.

Trimming Tips

Maintenance

Cleaning the Blades

All blades of the Vega OG Grooming Set are washable. After each use, detach the blade head and rinse it under running water to remove hair and debris. Ensure the trimmer unit itself does not get wet unless specified as waterproof. Allow the blades to air dry completely before reattaching or storing.

Oiling Blades

To maintain optimal performance and extend blade life, it is recommended to periodically apply a small drop of lubricating oil (not included, typically light machine oil) to the blades after cleaning and drying. Turn the trimmer on for a few seconds to distribute the oil evenly.

Washable blades and oiling illustration

Figure 6: Illustration highlighting washable blades and the importance of oiling blades to maintain blade life.

Storage

Store the grooming set and all its attachments in a cool, dry place, away from direct sunlight and moisture. Keep all components together to prevent loss.

Troubleshooting

If you encounter any issues with your Vega OG Grooming Set, please refer to the following common problems and their solutions:

Problem Possible Cause Solution
Trimmer does not turn on. Battery is low or depleted. Travel lock is activated. Charge the trimmer fully. Deactivate the travel lock.
Trimmer pulls hair or cuts unevenly. Blades are dull or dirty. Attachment is not properly secured. Hair is too long. Clean and oil the blades. Ensure the attachment is securely clicked into place. Trim longer hair with a higher comb setting first.
Charging indicator light is not working. Charging cable or adapter issue. Ensure the Type-C USB cable is properly connected to both the trimmer and the power source. Try a different compatible adapter.
Excessive noise during operation. Blades require lubrication. Debris caught in the blade mechanism. Clean and oil the blades. Remove any trapped hair or debris.

Specifications

Feature Detail
Model Number VHTH-37
Power Source Battery Powered (Li-ion)
Runtime 180 minutes
Charging Time 180 minutes
Blade Material Ceramic and Stainless Steel
Length Settings 40 (Rotary Knob) + 6 (Dial Comb)
Dimensions (L x W x H) 16.6 x 4.2 x 4.2 cm
Item Weight 179 g
Country of Origin China
Special Features Detachable, Self-Cleaning, Travel Size, Charge Indicator Light, Multigroomer

Warranty and Support

Your Vega OG 15 in 1 All Rounder Grooming Set comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your purchase receipt as proof of warranty.

For any product-related queries, technical support, or warranty claims, please contact Vega Customer Care:

For more information, you may also visit the official VEGA store online.

Related Documents - VHTH-37

Preview VEGA P-2 Beard Trimmer User Manual: Features, Usage & Maintenance
Comprehensive user manual for the VEGA P-2 Beard Trimmer (model VHTH-26). Learn about safe operation, cleaning, maintenance, technical specifications, and effective trimming techniques for achieving desired beard styles. Includes warranty and environmental disposal information.
Preview VEGA VHTH-14 Rechargeable Beard Trimmer User Manual & Guide
Comprehensive user manual for the VEGA VHTH-14 rechargeable beard trimmer. Learn about features, usage, cleaning, maintenance, safety, and warranty information provided by VEGA.
Preview Vega P1 Beard Trimmer User Manual
User manual for the Vega P1 Beard Trimmer, providing instructions on usage, cleaning, maintenance, safety precautions, and warranty information.
Preview VEGASON 61: Istruzioni d'uso per Sensore Ultrasonoro Foundation Fieldbus
Guida completa alle istruzioni d'uso per il sensore ultrasonoro VEGASON 61 di VEGA con tecnologia Foundation Fieldbus. Copre installazione, funzionamento, manutenzione e risoluzione dei problemi.
Preview VEGAPULS 66 Radar Seviye Sensörü Kullanım Kılavuzu
Bu kullanım kılavuzu, VEGA tarafından üretilen VEGAPULS 66 radar seviye sensörünün montajı, bağlantısı, devreye alınması, kullanımı ve bakımı hakkında detaylı bilgi sağlar. Sıvıların sürekli seviye ölçümü için tasarlanmış bu cihazın özelliklerini ve işletim talimatlarını içerir.
Preview VEGAPULS 62 Radar Seviye Sensörü Kullanım Kılavuzu
VEGAPULS 62 radar seviye sensörünün montajı, bağlantısı, devreye alınması, kullanımı, bakımı ve arıza giderme işlemleri hakkında detaylı bilgiler içeren resmi kullanım kılavuzu.