1. Introduction
Thank you for choosing the Insta360 Ace Pro 2 8K AI-Powered Action Camera. This manual provides essential information for setting up, operating, and maintaining your device. Please read it thoroughly before use to ensure optimal performance and longevity of your camera.
The Insta360 Ace Pro 2 features a Dual AI Chip system and a 1/1.3" sensor, designed for high-quality video and photo capture. It offers advanced stabilization, extended battery life, and a durable, waterproof design suitable for various environments.
2. What's in the Box
Verify that all components are present upon unboxing:
- Insta360 Ace Pro 2 Action Camera
- USB-C Cable
3. Product Overview

Figure 3.1: Insta360 Ace Pro 2 Action Camera with its flip screen extended.

Figure 3.2: Detail of the 1/1.3" 8K sensor and Leica SUMMARIT lens, highlighting the camera's advanced imaging capabilities.

Figure 3.3: Illustration of the camera's Industry-Leading Dual AI Chip system, featuring a dedicated Pro Imaging Chip and a 5nm AI Chip for enhanced performance.

Figure 3.4: Demonstrates the camera's Low Light Excellence, showcasing improved clarity and reduced noise in challenging lighting conditions compared to other action cameras.

Figure 3.5: The innovative Wind Guard accessory, designed to minimize noise for superior audio quality during recording.

Figure 3.6: Comparison showing the impact of 4K60fps Active HDR and Leica Color Profiles on dynamic range and color vibrancy.

Figure 3.7: Visual representation of FlowState Stabilization, demonstrating how it ensures smooth and level footage even in dynamic situations.

Figure 3.8: The camera's rugged and waterproof design, capable of withstanding submersion up to 39 feet (12 meters) without an additional dive case.
4. Setup
4.1 Charging the Battery
Before first use, fully charge the camera battery. Connect the supplied USB-C cable to the camera's USB-C port and a USB power adapter (not included). The charging indicator light will show the charging status.
4.2 Inserting a microSD Card
The Insta360 Ace Pro 2 requires a microSD card (not included) to store footage. Ensure the card is a V30 or higher speed class for optimal performance with 8K video recording.
- Locate the microSD card slot on the camera.
- Insert the microSD card with the contacts facing the correct direction until it clicks into place.
- To remove, push the card in slightly until it springs out.
4.3 Powering On/Off
- Power On: Press and hold the Power button until the screen turns on.
- Power Off: Press and hold the Power button until the camera shuts down.
5. Operating the Camera
5.1 Basic Recording
- Start Recording: Press the Shutter button once to begin recording video or take a photo.
- Stop Recording: Press the Shutter button again to stop video recording.
5.2 Using the Touchscreen
The 2.5" tilting touchscreen allows for easy control and framing. Swipe and tap to navigate menus, change settings, and preview footage.
5.3 Stabilization
The Insta360 Ace Pro 2 features advanced 6-axis gyroscope stabilization and in-camera 360° Horizon Lock to ensure smooth and level footage. This feature is automatically active during recording.
5.4 Waterproofing
The camera is waterproof up to 39 feet (12 meters) without a dive case. Ensure all ports are securely closed before exposing the camera to water.
6. Maintenance
6.1 Cleaning the Camera
- Use a soft, lint-free cloth to clean the lens and screen.
- For stubborn smudges, a small amount of lens cleaning solution can be applied to the cloth (not directly to the lens).
- After use in water, rinse the camera with fresh water and dry thoroughly before opening any ports.
6.2 Battery Care
- Avoid exposing the battery to extreme temperatures.
- Store the camera with the battery partially charged (around 50%) if not used for extended periods.
6.3 Storage
Store the camera in a cool, dry place away from direct sunlight and corrosive materials.
7. Troubleshooting
7.1 Camera Not Turning On
- Ensure the battery is sufficiently charged. Connect the camera to a power source and try again.
- Perform a hard reset by holding the Power button for 10-15 seconds.
7.2 Recording Issues (Stuttering/Freezing)
- Verify that you are using a high-speed microSD card (V30 or higher).
- Format the microSD card within the camera's settings.
- Ensure the camera's firmware is up to date.
7.3 Shutter Button Difficulty
If the shutter button is stiff or difficult to press, ensure no debris is lodged around the button. For persistent issues, contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Insta360 |
| Model Number | CINSBBGA |
| Item Weight | 14.4 ounces |
| Product Dimensions | 7 x 4 x 3 inches |
| Video Capture Resolution | 8K |
| Photo Sensor Technology | Other (1/1.3" sensor) |
| Maximum Focal Length | 13 Millimeters |
| Maximum Aperture | 2.6 Millimeters |
| Flash Memory Type | Micro SD |
| Video Capture Format | MP4 |
| Screen Size | 2.5 Inches (tilting touchscreen) |
| Connectivity Technology | USB |
| Special Feature | 360 Degree Capture, Dual AI Chip, FlowState Stabilization, Waterproof |
| Waterproof Depth | Up to 39' (12m) without dive case |
| Battery Life | Up to 180 minutes (1800mAh battery) |
9. Warranty and Support
Insta360 products typically come with a standard manufacturer's warranty. Please refer to the official Insta360 website or your purchase documentation for specific warranty terms and conditions.
For technical support, firmware updates, or additional resources, please visit the official Insta360 support page:
Insta360 Official Store and Support
No official product videos were available in the provided data for embedding in this manual.





