Introduction
The Sarmert C1 5K Dash Cam is an advanced vehicle recording device designed to capture high-resolution video footage of your journeys. Equipped with features such as 5K UHD recording, built-in GPS, 5G WiFi connectivity, and advanced night vision, it provides comprehensive surveillance and crucial evidence in various driving scenarios. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your dash cam.
Package Contents
Please verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.
Image: All components included in the Sarmert C1 5K Dash Cam package.
- Sarmert C1 5K Dash Cam x1
- GPS Bracket x1
- Packing Box x1
- Type-C Cigarette Lighter Power Cable x1
- 3M Adhesive x2
- Cable Clip x5
- Car Wire Trim Tool x1
- User Manual x1
- Electrostatic Sticker x2
- Wet Cleaning Pads x2
Product Overview
Familiarize yourself with the main components and interfaces of your Sarmert C1 Dash Cam.
Image: Detailed view of the Sarmert C1 Dash Cam with labels for its various components and features.
- Front Lens: Main camera for recording forward view.
- 2-inch IPS Screen: For live view, playback, and menu navigation.
- USB Type-C Port: For power input and data transfer.
- MicroSD Card Slot: Supports up to 512GB (card not included).
- GPS Module: Integrated for recording location and speed data.
- Ergonomic Buttons: For easy operation and screen locking.
- Speaker: For voice alerts and audio playback.
- Super Capacitor: Provides power for safe shutdown and extends product life.
Setup and Installation
Follow these steps to properly install your dash cam in your vehicle.
Image: Visual guide for installing the dash cam on the windshield and routing the power cable.
- Prepare the Windshield: Clean the area on your windshield where you intend to mount the dash cam. Ensure it is free of dust and grease.
- Apply Electrostatic Sticker: Place an electrostatic sticker on the cleaned area of the windshield. This helps protect your windshield and makes removal easier.
- Attach GPS Bracket: Secure the GPS bracket to the electrostatic sticker. Ensure it is firmly attached.
- Mount the Dash Cam: Slide the Sarmert C1 Dash Cam onto the GPS bracket until it clicks into place.
- Connect Power Cable: Connect the Type-C cigarette lighter power cable to the dash cam's USB port and plug the other end into your vehicle's cigarette lighter socket.
- Route the Cable: Use the provided cable clips and trim tool to neatly route the power cable along the edge of your windshield and dashboard, ensuring it does not obstruct your view or interfere with driving.
- Insert MicroSD Card: Insert a high-speed MicroSD card (Class 10 or higher, up to 512GB) into the designated slot on the dash cam. Format the card through the dash cam's settings menu before first use.
- Adjust Angle: Adjust the dash cam's lens angle to ensure it captures the road ahead clearly, covering the desired field of view.
Operating Instructions
Power On/Off and Basic Recording
The dash cam will automatically power on and begin recording when connected to power and your vehicle's ignition is turned on. It will automatically power off when the ignition is turned off.
5K UHD Recording
The Sarmert C1 supports multiple recording resolutions, including a stunning 5K (5120x2160P@25fps), 4K (3840x2160P@30fps), and 2.5K (2560x1440P@30fps). You can select your preferred resolution in the settings menu to balance video quality and file size.
Image: The dash cam's display showing selectable video resolutions.
Built-in 5G WiFi & App Control (RoadRec App)
The dash cam features dual-band 5G and 2.4GHz WiFi connectivity, allowing seamless connection to your iOS or Android device via the free RoadRec app. This enables you to:
Image: The RoadRec app on a smartphone, demonstrating faster video download speeds via 5G WiFi.
- View live footage from the dash cam.
- Download recorded videos and photos directly to your phone.
- Share content with friends and family.
- Adjust all dash cam settings conveniently within the app.
- Perform OTA (Over-The-Air) firmware upgrades.
The 5G WiFi offers up to 8MB/s transfer speed for faster downloads compared to 2.4GHz WiFi.
Super Night Vision with WDR
Equipped with an advanced high-sensitivity sensor, six glass lenses, and a large f1.8 aperture, the dash cam captures clear and vivid footage even in low-light conditions. The 150° ultra-wide angle minimizes blind spots. WDR (Wide Dynamic Range) technology balances bright and dark areas in the footage, ensuring stable and clear video quality in varying lighting conditions.
Image: Demonstration of Super Night Vision capabilities in low-light environments.
Built-in GPS
The integrated GPS module records your exact driving route, location, and speed directly onto the video footage. This data can be viewed on your phone using the RoadRec app or on your PC/Mac using Sarmert's free GPS Player, providing essential evidence in case of an incident.
Image: GPS tracking functionality shown on both mobile app and PC software.
Seamless Loop Recording
The dash cam continuously records in loops. When the memory card is full, the oldest unlocked video files are automatically overwritten by new ones, ensuring uninterrupted recording. You can select loop recording durations (e.g., 1, 3, or 5 minutes) in the settings menu.
Image: Explanation of seamless loop recording and how files are managed.
G-Sensor and Emergency Video Lock
The built-in G-sensor (gravity sensor) detects sudden impacts or collisions. When triggered, it automatically saves and locks the current video segment into an emergency folder, preventing it from being overwritten by loop recording. These locked videos serve as crucial evidence.
Image: Visual representation of the G-Sensor locking video footage during an impact.
24-Hour Parking Monitor
With an optional hardwire kit (sold separately), the dash cam can provide 24-hour surveillance of your parked vehicle. It supports collision detection, motion detection, and time-lapse recording to capture events while your car is unattended. The dash cam will notify you audibly with a voice alert if an event is detected.
Image: The dash cam's parking monitor feature detecting various types of incidents.
Headlights Reminder and Fatigue Driving Reminder
The dash cam includes intelligent reminders to enhance driving safety:
- Headlights Reminder: In tunnels or low-light conditions, the dash cam will remind you to turn on your headlights for added safety.
- Fatigue Driving Reminder: You can set the dash cam to alert you to take a break after 1, 2, or 4 hours of continuous driving, helping to prevent drowsy driving.
Image: Visual alerts for Headlights Reminder and Fatigue Driving Reminder.
Screen Saver and Ergonomic Buttons
The screen saver function allows the display to automatically turn off after 1, 3, or 5 minutes (or be disabled) while recording continues in the background. This reduces distraction while driving. The dash cam features ergonomically designed buttons for easy access and control, including a dedicated button for emergency video locking.
Image: The dash cam's screen saver feature and the design of its ergonomic control buttons.
Super Capacitor
The Sarmert C1 dash cam is built with a super capacitor instead of a traditional lithium-ion battery. This provides enhanced durability, extends the product's lifespan, and allows it to withstand extreme temperatures (from -4°F to 158°F), making it more reliable in various climates and safer against fire or explosion risks.
Image: Benefits of the super capacitor technology used in the dash cam.
Troubleshooting
If you encounter any issues with your Sarmert C1 Dash Cam, please refer to the following common problems and solutions before contacting customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Dash cam does not power on. | No power supply; loose connection; faulty power cable. | Check cigarette lighter connection; ensure vehicle ignition is on; try a different power source or cable. |
| Recording stops or freezes. | MicroSD card issue (full, slow, or corrupted); firmware issue. | Format MicroSD card; try a new high-speed MicroSD card; update firmware via RoadRec app. |
| WiFi connection unstable or fails. | Interference; incorrect password; app issue. | Ensure you are within 25ft of the dash cam; re-enter WiFi password; restart dash cam and phone app. |
| GPS not acquiring signal. | Poor satellite reception; dash cam placement. | Ensure dash cam has a clear view of the sky; move away from tall buildings or tunnels. |
| Video quality is poor. | Dirty lens; incorrect resolution setting; low light conditions. | Clean the lens; set resolution to 5K or 4K; ensure WDR is enabled for challenging light. |
Specifications
Detailed technical specifications for the Sarmert C1 5K Dash Cam.
- Model: C1
- Display: 2-inch IPS Screen
- Video Capture Resolution: 5K (5120x2160P@25fps), 4K (3840x2160P@30fps), 2.5K (2560x1440P@30fps)
- Lens: 150° Wide Angle, F1.8 Aperture, 6-Glass Lens
- Storage: Supports MicroSD card up to 512GB (Class 10 or higher recommended)
- Connectivity: Built-in 5G & 2.4GHz WiFi, Built-in GPS
- Special Features: Super Night Vision, WDR, Loop Recording, G-Sensor, 24H Parking Monitor (requires hardwire kit), Voice Alert, Headlights Reminder, Fatigue Driving Reminder, Screen Saver, Built-in Supercapacitor
- Power Source: Type-C Cigarette Lighter Power Cable
- Operating Temperature: -4°F to 158°F (-20°C to 70°C)
- Dimensions: Approximately 3 x 10 x 7 cm
- Weight: Approximately 300 g
Maintenance
Proper maintenance ensures the longevity and optimal performance of your dash cam.
- Clean the Lens: Regularly wipe the camera lens with a soft, lint-free cloth to ensure clear recordings. Avoid abrasive materials that could scratch the lens.
- Format MicroSD Card: It is recommended to format the MicroSD card once a month to prevent data corruption and ensure smooth recording. Back up any important files before formatting.
- Keep Away from Extreme Temperatures: While the super capacitor offers good temperature resistance, prolonged exposure to extreme heat or cold can still affect electronic components.
- Check Connections: Periodically check that all cables and mounts are securely connected to prevent accidental disconnections during driving.
Warranty and Support
Sarmert provides a standard warranty for its products. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official Sarmert website. If you require technical assistance, have questions about product features, or need to report an issue, please contact Sarmert customer support through the contact information provided on the official website or within the RoadRec app.
For the latest firmware updates and FAQs, please visit the Sarmert support page online.
