1. Introduction
This manual provides essential instructions for the safe and effective use of your Onerbl AC-DC Adapter. This adapter is designed as a replacement power supply for specific Belifu Dual Channel Electronic Pulse Massagers, including models TENS001, SM9126, AS8015, and AS8012B. It converts standard AC wall power into the 5VDC required by your device, enabling operation or battery charging.
Please read this manual thoroughly before using the adapter and retain it for future reference.
2. Important Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury, always follow these basic safety precautions.
- Use the adapter only with compatible devices as specified in this manual. Using it with incompatible devices may cause damage or injury.
- Do not expose the adapter to water, rain, or excessive moisture.
- Do not operate the adapter if it has been damaged in any way (e.g., frayed cord, broken casing).
- Ensure the power outlet is easily accessible and unplug the adapter when not in use for extended periods.
- Do not attempt to open or modify the adapter. There are no user-serviceable parts inside.
- Keep the adapter away from heat sources and direct sunlight.
- Always grasp the plug, not the cord, when disconnecting from the power outlet.
3. Setup Instructions
Follow these steps to properly connect your Onerbl AC-DC Adapter to your device:
- Inspect the Adapter: Before use, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
- Connect to Device: Locate the power input port on your Belifu Electronic Pulse Massager. Carefully insert the adapter's connector into the device's power port. Ensure a snug fit.
- Connect to Power Outlet: Plug the AC-DC adapter into a standard AC 100-240V wall power outlet.
- Verify Connection: Once connected, your device should indicate that it is receiving power or charging, typically via an indicator light on the massager.
Image: The Onerbl AC-DC Adapter, showing the main unit and its USB connector. This adapter is designed to provide power to compatible electronic devices.
4. Operating Instructions
Once the Onerbl AC-DC Adapter is properly connected to both the power outlet and your Belifu Electronic Pulse Massager, your device is ready for use or charging.
- Powering the Device: The adapter provides continuous power to your massager, allowing it to operate directly from a wall outlet.
- Charging the Battery: If your massager has a rechargeable battery, the adapter will charge it while connected. Refer to your massager's manual for specific charging indicators and times.
- Disconnection: To disconnect, first power off your massager (if applicable), then unplug the adapter from the wall outlet, and finally disconnect the adapter from your device.
5. Care and Maintenance
Proper care ensures the longevity and safe operation of your Onerbl AC-DC Adapter:
- Cleaning: Disconnect the adapter from all power sources before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly winding the cable to prevent damage.
- Inspection: Periodically inspect the adapter and cable for any signs of wear, cuts, or damage. If damage is found, discontinue use immediately.
6. Troubleshooting
If you encounter issues with your Onerbl AC-DC Adapter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on/charging. | Adapter not properly plugged in. | Ensure the adapter is securely plugged into both the wall outlet and the device. |
| Wall outlet is not active. | Test the outlet with another working appliance. | |
| Device power port or adapter connector is damaged. | Inspect both the device's power port and the adapter's connector for visible damage. Do not use if damaged. | |
| Adapter feels warm during use. | Normal operation. | It is normal for power adapters to generate some heat. If it becomes excessively hot or emits smoke/smell, unplug immediately. |
If troubleshooting steps do not resolve the issue, please contact customer support.
7. Product Specifications
- Brand: Onerbl
- Input: AC 100-240V, 50/60Hz (Worldwide AC Input)
- Output: 5VDC (Specific amperage not provided, but implied by device compatibility)
- Connector Type: USB Connector
- Compatible Devices: Belifu Model TENS001, SM9126, AS8015, AS8012B Dual Channel Electronic Pulse Massager 5VDC
- Special Features: Over Voltage Protection, Over Heat Protection, Short Circuit Protection
- Color: Black
- Manufacturer: Shenzhen Waweis Technology Co., Ltd
8. Warranty and Support
Onerbl products are manufactured with quality materials and undergo rigorous testing. While specific warranty details are not provided in this manual, please refer to the product packaging or the retailer's website for information regarding warranty coverage and terms.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller or Onerbl customer service through the contact information provided at the point of purchase.