1. Introduction
Thank you for choosing the Pawfly Aquarium Air Pump. This pump is designed to provide essential oxygenation for your fish tank, bucket, or Deep Water Culture (DWC) system. Its dual outlets and adjustable airflow ensure optimal performance for tanks ranging from 10 to 60 gallons, while its ultra-quiet operation minimizes disturbance.
Please read this manual thoroughly before installation and operation to ensure safe and efficient use of your air pump.

Image: Pawfly 50 GPH Aquarium Air Pump suitable for tanks up to 60 gallons.
2. Product Features
- Steady Output: Delivers a maximum air flow rate of 50 GPH with a pressure of 0.013 MPa and low power consumption of 1.25 W. Ideal for fish tanks or buckets up to 60 gallons.
- Adjustable Air Flow: Features a rotatable knob on the top for manual adjustment of air volume, allowing you to customize the airflow to meet your specific needs and maintain healthy aquatic life.
- Quiet Operation: Equipped with four shockproof rubber feet to minimize vibration, reducing noise levels to less than 30 dB, comparable to a soft speaking voice. Ensures minimal disturbance to your environment.
- Reliable Construction: Constructed with a sturdy ABS shell and a heavy-duty internal structure, providing durability and a lightweight, space-saving design.
- Dual Outlet Ports: Designed with two outlets, allowing for simultaneous operation of two air stones or filters.

Image: Dimensions and key specifications of the air pump.

Image: Adjustable air flow knob and comparison of low vs. high air output.

Image: Illustrates the ultra-quiet operation of the air pump.

Image: Shows the included 6.5 ft tubing and the dual outlet ports.
3. Package Contents
Your Pawfly Aquarium Air Pump package includes the following items:
- 1 x Pawfly Aquarium Air Pump
- 1 x 6.5-foot (2m) 3/16" (4mm ID) Airline Tubing
- 2 x Small Air Stone Cylinders
- 1 x Straight Connector
- 1 x T-shape Connector
- 2 x Check Valves

Image: All components included in the package, with their respective dimensions.
4. Setup Instructions
- Position the Air Pump: Place the air pump on a stable, dry surface above the water level of your tank. This prevents water from siphoning back into the pump in case of a power outage.
- Connect Tubing: Cut the airline tubing to the desired length(s). Connect one end of the tubing to an air outlet on the pump.
- Install Check Valve: For safety, install a check valve in the airline tubing between the pump and the air stone. Ensure the arrow on the check valve points towards the air stone (away from the pump). This prevents water backflow.
- Connect Air Stone: Connect the other end of the tubing (after the check valve) to an air stone.
- Place Air Stone: Submerge the air stone in your fish tank, bucket, or DWC system.
- Dual Outlet Setup (Optional): If using both outlets, repeat steps 2-4 for the second outlet. Use the T-shape connector to split the air flow to two air stones from one outlet, or use the straight connector to extend tubing if needed.
- Power On: Plug the air pump into a suitable power outlet.
The Pawfly air pump is versatile and can be used in various aquatic and hydroponic setups:

Image: Various applications of the air pump, including aquariums, fish tanks, DWC buckets, and hydroponics.
5. Operating Instructions
- Adjusting Air Flow: Locate the rotatable knob on the top of the air pump. Turn the knob clockwise to increase the air volume and counter-clockwise to decrease it. Adjust the airflow to achieve the desired bubble intensity and oxygenation for your aquatic environment.
- Continuous Operation: The pump is designed for continuous operation. Monitor your tank's oxygen levels and adjust the airflow as needed.
6. Maintenance
- Regular Cleaning: Periodically clean the exterior of the air pump with a soft, damp cloth. Do not submerge the pump in water.
- Air Stone Replacement: Air stones can become clogged over time, reducing air output. Replace air stones when you notice a significant decrease in bubble production.
- Tubing Inspection: Check airline tubing regularly for kinks, cracks, or blockages. Replace damaged tubing to ensure optimal airflow.
- Check Valve Functionality: Ensure check valves are clean and functioning correctly to prevent water backflow.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No air output |
|
|
| Low air output |
|
|
| Excessive noise |
|
|
| Water backflow into pump |
|
|
8. Specifications
- Brand: Pawfly
- Model: B0CY296NKH
- Color: Black
- Material: Plastic
- Max Air Flow Rate: 50 GPH
- Pressure: 0.013 MPa
- Power: 1.25 W
- Suitable Tank Size: 10-60 Gallons
- Item Weight: 0.39 Kilograms
- Power Source: Corded Electric
- Operation Mode: Automatic
9. Warranty and Support
This Pawfly Aquarium Air Pump comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact Pawfly customer service through the retailer's platform or visit the official Pawfly store online.
Please retain your proof of purchase for warranty validation.