TYLT Crest 15W Wireless Charging Convertible Stand User Manual

1. Introduction

The TYLT Crest is a versatile 15W fast wireless charger designed for both home and office environments. This device features a convertible design, allowing it to function as a flat charging pad or an upright stand. It is compatible with various wireless charging enabled devices, including smartphones and wireless headphones, providing efficient power delivery.

2. Safety Information

• Do not expose the device to liquids, moisture, or extreme temperatures.
• Avoid dropping or subjecting the device to severe impacts.
• Do not attempt to disassemble, repair, or modify the charger. This may void the warranty and pose safety risks.
• Use only certified power adapters and cables with the device.
• Keep out of reach of children.
• Ensure proper ventilation during use to prevent overheating.

3. Package Contents

Verify that all items are present in the package:

• TYLT Crest 15W Wireless Charging Convertible Stand
• 1 USB Type-C to USB Type-C cable (power adapter not included)

4. Setup

1. Connect one end of the provided USB Type-C cable to the USB-C port on the TYLT Crest charger.
2. Connect the other end of the USB Type-C cable to a compatible USB power adapter (not included). For optimal 15W charging, use a power adapter that supports Power Delivery (PD) with at least 15W output.
3. Plug the power adapter into a wall outlet. The charger is now ready for use.

Image: The TYLT Crest charger shown in its upright stand configuration, actively charging a smartphone. This illustrates the device's primary function as a phone stand and charger.

5. Operating Instructions

5.1. Charging in Stand Mode

1. Ensure the TYLT Crest is in its upright stand configuration.
2. Place your wireless charging compatible smartphone onto the stand. Align the center of your phone with the charging coil area on the stand.
3. The charging indicator on your phone should activate, confirming that charging has begun.

5.2. Charging in Flat Pad Mode

1. Gently convert the TYLT Crest from stand mode to its flat pad configuration.
2. Place your wireless charging compatible device, such as wireless headphones or a smaller smartphone, onto the flat charging surface. Ensure the device is centered on the pad.
3. The device's charging indicator should activate, confirming that charging has begun.

Note: For optimal 15W fast wireless charging, ensure your device supports 15W wireless charging and is properly aligned with the charging coil.

6. Maintenance

• To clean the charger, disconnect it from the power source.
• Wipe the surface with a soft, dry, or slightly damp cloth.
• Do not use harsh chemicals, abrasive cleaners, or solvents.
• Ensure the charger is completely dry before reconnecting it to power.

7. Troubleshooting

8. Specifications

• Model: Crest
• Brand: TYLT
• Wattage: 15 Watts
• Output Current: 3 Amps
• Output Voltage: 5 Volts
• Connector Type: USB Type C
• Compatible Devices: Cellular Phones, Headphones
• Compatible Phone Models: Most modern smartphones with USB-C and wireless charging capabilities
• Included Components: 1 adapter (USB Type-C cable)
• Color: Black
• Item Weight: 12.8 ounces
• Package Dimensions: 7 x 5 x 1.5 inches

9. Warranty and Support

TYLT products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or visit the official TYLT website. For technical support, product inquiries, or assistance, please contact TYLT customer service through their official website or the contact information provided in your product packaging.

Official TYLT Website: www.tylt.com