ACEMIC AT-5 Acoustic Guitar Wireless Microphone System User Manual

1. Introduction

This manual provides detailed instructions for the ACEMIC AT-5 Acoustic Guitar Wireless Microphone System. This system is designed to provide high-fidelity audio transmission for plucked string instruments, offering freedom of movement and clear sound reproduction. It utilizes UHF frequency for stable wireless connectivity and features a flexible gooseneck microphone for precise sound capture.

2. Package Contents

Please verify that all items listed below are included in your package:

• 1 x ACEMIC AT-5 Wireless Microphone Transmitter (with gooseneck microphone)
• 1 x ACEMIC AT-5 Wireless Receiver (with 6.35mm jack and antenna)
• 1 x USB-C Charging Cable
• 1 x 3.5mm Audio Jack Adapter
• 5 x Velcro Adhesive Attachments
• 1 x Spare Microphone Foam Cover
• 1 x User Manual
• 1 x Carrying Bag

3. Product Overview

The ACEMIC AT-5 system consists of two main components: the Transmitter and the Receiver.

3.1. Transmitter (Microphone Unit)

• Gooseneck Microphone: Flexible arm for precise positioning.
• Microphone Foam Cover: Reduces plosives and wind noise.
• Power Button: For turning the unit on/off.
• Charging Port (USB-C): For recharging the internal battery.
• IR Sensor: For automatic pairing with the receiver.

3.2. Receiver

• 6.35mm Audio Jack: Connects to amplifiers, mixers, or PA systems.
• Antenna: For stable signal reception.
• Power Button: For turning the unit on/off.
• Charging Port (USB-C): For recharging the internal battery.
• Display: Shows channel information.
• Channel Switch Button: For manual channel selection.
• IR Sensor: For automatic pairing with the transmitter.

4. Setup Instructions

Follow these steps to set up your ACEMIC AT-5 wireless microphone system:

4.1. Charging the Units

1. Connect the USB-C charging cable to the charging ports on both the transmitter and receiver units.
2. Plug the other end of the cable into a USB power adapter (not included) or a powered USB port.
3. The charging indicator will illuminate. A full charge typically takes 2.5 to 3 hours.
4. Once fully charged, the indicator light will change or turn off, depending on the unit.

4.2. Attaching the Transmitter to Your Instrument

1. Select a suitable location on your acoustic guitar, typically near the sound hole, where the transmitter can be securely attached without obstructing your playing.
2. Peel the backing from one of the Velcro adhesive attachments.
3. Apply the adhesive side firmly to the chosen spot on your guitar.
4. Attach the transmitter unit to the Velcro. Ensure it is secure.
5. Adjust the flexible gooseneck microphone to point towards the sound hole or strings for optimal sound capture.

4.3. Connecting the Receiver

1. Ensure the antenna on the receiver is correctly installed and extended.
2. Plug the 6.35mm audio jack of the receiver directly into the input of your amplifier, PA system, or audio mixer.
3. If your device requires a 3.5mm input, use the provided 3.5mm audio jack adapter.

4.4. Pairing the Units

The ACEMIC AT-5 system features automatic infrared pairing:

1. Power on both the transmitter and the receiver units.
2. Place the IR sensors of the transmitter and receiver close to each other (within a few inches).
3. The units will automatically pair. A successful connection is usually indicated by a stable light on both units.

5. Operation

5.1. Powering On/Off

Press and hold the power button on each unit to turn it on or off.

5.2. Channel Selection

The system offers 16 preset groups of adjustable channels to mitigate potential interference. If you experience interference, you can manually switch channels on the receiver using the channel switch button. Ensure that the transmitter and receiver are on the same channel for proper operation.

5.3. Microphone Placement

Adjust the flexible gooseneck microphone to achieve the desired sound. Experiment with different angles and distances from the sound hole or strings to find the optimal position for your instrument and playing style. The built-in high-sensitivity condenser microphone is designed to capture clear and realistic audio.

5.4. Wireless Transmission

The ACEMIC AT-5 system uses UHF frequency for stable transmission up to 130 feet (approximately 40 meters) in open areas. Performance may vary depending on environmental factors and obstacles.

6. Maintenance

6.1. Cleaning

Wipe the units with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the finish or internal components.

6.2. Storage

When not in use, store the ACEMIC AT-5 system in its carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the units are turned off before storage.

6.3. Battery Care

To prolong battery life, avoid completely discharging the units regularly. Recharge them periodically, even if not in frequent use.

7. Troubleshooting

If you encounter issues with your ACEMIC AT-5 system, refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. Specific warranty terms may vary by region and retailer.