Introduction
This manual provides detailed instructions for the safe and effective use of your VFD Electric Nail Drill AOL05. This cordless, rechargeable device is designed for comprehensive hand and foot nail care, offering professional results at home. Please read this manual thoroughly before operation and retain it for future reference.
Safety Information
Always wear safety glasses when using the nail drill to protect against flying debris or dust. Be cautious of the rotating bit and motor to avoid burns. Follow the instructions for proper use, handling, and storage to ensure safe operation.
Package Contents
Your VFD Electric Nail Drill AOL05 kit includes the following items:
- 1 x VFD Electric Nail Drill Device
- 1 x USB Charging Cable
- 1 x Dust Cover
- 1 x Red Ceramic Corn Bit (finer)
- 1 x Blue Ceramic Corn Bit (coarser)
- 1 x Mandrel with Sanding Band
- 1 x Safety Bit
- 1 x Needle Bit
- 1 x Long Cone Bit
- 1 x Small Barrel Bit
- 1 x Large Barrel Bit
- 1 x Felted Wool Bit
- 1 x Coarse Disc Bit
- 1 x Sapphire Callus Sander
- 1 x Sapphire Cone Bit
- 20 x Sanding Bands (various grits)
- 1 x Storage Case
Product Features
- Cordless & Rechargeable: Equipped with a 2000 mAh battery, providing over 6 hours of continuous cordless operation on a full charge.
- 10 Speed Settings: Adjustable speeds from 2000 RPM to 35,000 RPM for precise control.
- Dual Rotations: Supports both clockwise and counter-clockwise rotations for versatile use on all nail types.
- LED Display: Integrated LED screen shows speed level and battery status.
- Built-in LED Light: Illuminates the work area for enhanced precision and visibility.
- Low Noise & Vibration: Engineered with a coreless motor for quiet operation (40-50 decibels) and minimal vibration.
- Low Heat: Designed to prevent overheating during extended use.
- Portable Design: Compact and lightweight for easy travel and storage.
Video 1: This video demonstrates the VFD Electric Nail Drill, highlighting its cordless design, 2000 mAh battery, 12-in-1 kit, and various features for comprehensive nail care.
Setup
- Charge the Device: Before first use, fully charge the nail drill using the provided USB charging cable. The LED display will indicate charging status and battery level.
- Select a Bit: Choose the appropriate grinding head for your desired task (e.g., filing, buffing, callus removal). Refer to the "Package Contents" section for bit descriptions.
- Attach the Bit: Gently insert the chosen bit into the opening at the top of the drill until it is securely in place. Ensure it is firmly seated to prevent dislodging during operation.
- Attach Dust Cover (Optional): For tasks that generate dust, attach the clear dust cover over the bit to minimize debris spread.
Operating Instructions
- Power On/Off: Press and hold the power button (usually marked with a power symbol) to turn the device on or off.
- Adjust Speed: Use the '+' and '-' buttons to increase or decrease the rotation speed. The LED display will show the current speed level (1-10).
- Change Rotation Direction: Press the 'L/R' button to switch between clockwise and counter-clockwise rotation, depending on your dominant hand or specific task.
- Activate LED Light: Press the light bulb button to turn the built-in LED light on or off for improved visibility.
- Perform Nail Care:
- Filing/Shaping: Use appropriate bits (e.g., ceramic corn bits, long cone bit) to shape and shorten nails.
- Buffing/Polishing: Use the felted wool bit or coarse disc bit to smooth nail surfaces and add shine.
- Cuticle Care: Use the needle bit or safety bit to gently push back or clean around cuticles.
- Callus Removal: Use the sapphire callus sander or coarse disc bit to remove dead skin and calluses from hands and feet.
- Gentle Application: Apply light pressure and move the drill bit smoothly over the nail or skin surface. Avoid excessive pressure or prolonged contact in one area to prevent heat buildup or injury.
Maintenance
- Cleaning Bits: After each use, remove the drill bit and clean it with a small brush or alcohol wipe to remove nail dust and debris.
- Cleaning Device: Wipe the main body of the nail drill with a soft, dry cloth. Do not immerse the device in water.
- Storage: Store the nail drill and all accessories in the provided storage case in a cool, dry place, away from direct sunlight and moisture.
- Battery Care: To prolong battery life, avoid fully discharging the device frequently. Charge it regularly, even if not in constant use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery or no charge. | Charge the device fully using the USB cable. |
| Bit is loose or falls out. | Bit not inserted correctly. | Ensure the bit is fully and securely inserted into the drill head. |
| Device stops during use. | Overheating or low battery. | Allow the device to cool down. Check battery level and recharge if necessary. |
| Ineffective filing/buffing. | Incorrect bit or worn-out sanding band. | Select the appropriate bit for the task. Replace worn sanding bands. |
Specifications
- Model Number: AOL05
- Brand: VFD
- Material: Plastic
- Battery: 2000 mAh Rechargeable (1 A battery included)
- Input: 5V = 1A
- Product Dimensions: 1.5"L x 1.5"W x 6.5"H (1.5 x 1.5 x 6.5 inches)
- Item Weight: 0.4 Kilograms (13.93 ounces)
- Speed Range: 2000 RPM - 35,000 RPM (10 levels)
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact VFD customer service directly. Keep your purchase receipt as proof of purchase.
