1. Introduction
Thank you for choosing the EMKE Bathroom Mirror with Lighting. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. Please read these instructions carefully before installation and retain them for future reference.
2. Safety Information
- Always disconnect power at the main circuit breaker before installation or maintenance.
- Installation should be performed by a qualified electrician in accordance with all local electrical codes.
- Handle the mirror with care. The glass is tempered but can break if subjected to sharp impacts.
- Do not attempt to modify the electrical components of the mirror.
- Ensure the mounting surface is structurally sound and can support the weight of the mirror.
- Keep children away from the installation area.
3. Package Contents
Verify that all components are present and undamaged before beginning installation.
- EMKE Bathroom Mirror with Lighting (Model TLM04BTD-FRVC)
- Mounting hardware (screws, wall anchors)
- Instruction Manual
4. Setup and Installation
The EMKE Bathroom Mirror can be installed either horizontally or vertically. Choose the orientation that best suits your space.
Figure 4.1: Flexible Installation - Horizontal and Vertical Mounting Options
Installation Steps:
- Measure: Determine the desired mounting height and position for the mirror. Mark the drilling points accurately on the wall.
- Mark: Use a level to ensure the marks are perfectly aligned for horizontal or vertical installation.
- Drill: Drill holes at the marked positions using an appropriate drill bit for your wall type. Insert wall anchors if necessary.
- Secure: Insert screws into the wall anchors, leaving a small gap for the mirror's mounting brackets.
- Wire: Connect the mirror's electrical wiring to your household electrical supply. This step should be performed by a qualified electrician. Ensure power is disconnected before wiring.
- Assemble: Carefully hang the mirror onto the secured screws. Ensure it is stable and level.
Figure 4.2: Step-by-Step Installation Guide
Dimensions:
The mirror measures approximately 31.5 inches (80 cm) in length and 23.6 inches (60 cm) in width, with a depth of 35 mm.
Figure 4.3: Mirror Dimensions
5. Operating Instructions
Your EMKE Bathroom Mirror features intuitive touch controls for lighting and anti-fog functions.
5.1 Power On/Off and Dimming
- Power On: Touch the power button on the mirror surface. The button will illuminate white when the mirror is on.
- Power Off: Touch the power button again. The button will illuminate blue when the mirror is off.
- Dimming: With the light on, press and hold the power button to adjust the brightness from 10% to 100%. Release the button when the desired brightness is reached. The mirror features a cool white light with a color temperature of 6500K.
Figure 5.1: Light Dimming Function (10% to 100%)
5.2 Anti-Fog Function
- Activate Anti-Fog: Touch the dedicated anti-fog button on the mirror surface. This function operates independently for energy efficiency.
- Clear Reflection: Once activated, the integrated heating plate ensures a clear reflection even in a humid bathroom environment.
Figure 5.2: Anti-Fog Function for Clear Reflection
5.3 Memory Function and Automatic Shut-Off
- Memory Function: The mirror remembers the last set brightness level and light color, restoring it upon reactivation.
- Automatic Shut-Off: The mirror lighting will automatically turn off after 3 hours of inactivity to conserve energy.
5.4 Wall Switch Control
- The mirror can be controlled via your home's wall switch, provided the mirror's touch power button is activated (mirror is in an 'on' state).
Figure 5.3: Flexible Control via Wall Switch (Wall switch not included)
6. Maintenance
To ensure the longevity and optimal performance of your EMKE Bathroom Mirror, follow these maintenance guidelines:
- Cleaning the Mirror Surface: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the edges.
- Cleaning the Frame: Wipe the frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Electrical Components: Do not attempt to clean or service the internal electrical components. If you suspect an issue, contact a qualified electrician.
- Regular Inspection: Periodically check the mounting hardware to ensure it remains secure.
7. Troubleshooting
If you encounter any issues with your EMKE Bathroom Mirror, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Faulty wiring Touch switch malfunction | Check circuit breaker. Ensure proper electrical connection. If wiring is suspected, consult an electrician. |
| Anti-fog function not working | Anti-fog button not activated Electrical issue | Ensure the anti-fog button is pressed. Check power supply. |
| Light flickers or is dim | Unstable power supply Dimming setting too low | Check power connections. Adjust brightness using the touch switch. |
| Mirror does not respond to wall switch | Mirror's touch button is off | Ensure the mirror's touch power button is activated (light is on or in standby mode). |
8. Specifications
- Brand: EMKE
- Model Number: TLM04BTD-FRVC
- Product Dimensions: 31.5"L x 23.62"W (80 cm x 60 cm)
- Shape: Rectangular
- Mounting Type: Wall Mount
- Color: Anti-fog+6500k (Cool White Light)
- Light Color Temperature: 6500K
- Dimmable: Yes (10% to 100%)
- Features: Anti-Fog, Touch Switch, Memory Function, Automatic Shut-Off (3 hours)
- Item Weight: 16.94 pounds
- Assembly Required: No (Installation required)
- Included Components: Mirror
Figure 8.1: Mirror Construction Details
9. Warranty and Support
EMKE products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EMKE website. Please have your model number (TLM04BTD-FRVC) and purchase date available when contacting support.
