ROMP Pulse

ROMP Pulse Rabbit Vibrator & Clit Sucker Instruction Manual

Brand: ROMP | Model: Pulse

Introduction

The ROMP Pulse is a dual-stimulation device designed for enhanced pleasure. It combines clitoral suction with G-spot vibrations, offering a versatile experience. Featuring Pleasure Air Technology, this device is rechargeable, waterproof, and made from body-safe silicone.

ROMP Pulse Rabbit Vibrator, purple with pink base

Image: The ROMP Pulse device, showcasing its ergonomic design and dual stimulators.

What's in the Box

Your ROMP Pulse package includes:

  • ROMP Pulse Rabbit Vibrator
  • USB Charging Cable
  • Storage Pouch
  • Instruction Manual
ROMP Pulse packaging and contents

Image: The ROMP Pulse device shown alongside its retail packaging, USB charging cable, and user manual.

Setup

Charging the Device

  1. Locate the charging port on the device, typically at the base.
  2. Connect the provided USB charging cable to the device and a compatible USB power source (e.g., computer, wall adapter).
  3. The indicator light on the device will illuminate during charging.
  4. A full charge takes approximately 120 minutes and provides up to 120 minutes of use on full power.
ROMP Pulse connected to USB charging cable

Image: The ROMP Pulse device with its charging cable connected to the charging port, illustrating the charging process.

Operating Instructions

The ROMP Pulse features intuitive controls for a personalized experience.

Diagram of ROMP Pulse buttons and features

Image: A diagram highlighting the buttons for suction and vibration control, along with the charging pin hole and the clitoral suction rabbit arm.

Controls Overview

  • Power Button (Middle): Press and hold for 2 seconds to turn the device on or off.
  • Vibration Control Button (Bottom): Press to cycle through 3 different intensity settings and 7 pattern modes for G-spot vibrations.
  • Suction Control Button (Top): Press to cycle through 5 different intensities for the Pleasure Air clitoral suction.

Using the Device

  1. Ensure the device is fully charged.
  2. Apply a water-based lubricant to the device for comfortable use.
  3. Press and hold the Power Button for 2 seconds to turn on the device. The indicator light will illuminate.
  4. Use the Vibration Control Button to select your desired G-spot vibration mode.
  5. Use the Suction Control Button to select your desired clitoral suction intensity.
  6. You can operate both functions independently or simultaneously to customize your experience.
  7. To turn off, press and hold the Power Button for 2 seconds until the indicator light turns off.

Product Overview Video

Video: A brief overview of the ROMP Pulse, demonstrating its features and design.

ROMP Pulse Rabbit Vibrator Demonstration

Video: A visual demonstration of the ROMP Pulse Rabbit Vibrator in action, highlighting its various modes and functions.

Maintenance: Cleaning and Care

Proper cleaning and care will ensure the longevity and hygiene of your ROMP Pulse.

  • Waterproof Design: The ROMP Pulse is IPX7 waterproof, allowing for safe use in water and easy cleaning under running water.
  • Material: Made from ultra-hygienic, hypoallergenic silicone.
  • Cleaning: After each use, wash the device with warm water and a mild, toy-friendly soap. Rinse thoroughly and allow to air dry completely before storing.
  • Lubricant Compatibility: Always use a water-based lubricant with this device. Oil-based or silicone-based lubricants can damage the silicone material over time.
  • Storage: Store the device in its provided storage pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
ROMP Pulse device submerged in water, demonstrating its waterproof feature

Image: The ROMP Pulse device shown partially submerged in water, highlighting its IPX7 waterproof rating.

Troubleshooting

If you encounter any issues with your ROMP Pulse, please refer to the following common solutions:

  • Device Not Turning On: Ensure the device is fully charged. Connect it to the charger and wait for the indicator light to confirm charging.
  • Weak Vibrations/Suction: The battery may be low. Recharge the device fully.
  • Buttons Unresponsive: Ensure the device is not in 'travel lock' mode (if applicable, refer to the included printed manual for specific instructions). If issues persist, try fully charging the device.
  • Unusual Noise or Heat: Discontinue use immediately. Contact customer support for assistance.

If these steps do not resolve the issue, please contact ROMP customer support for further assistance.

Specifications

  • Product Dimensions: 8.66 x 3.15 x 0.57 inches
  • Weight: 7.92 ounces
  • Material: Silicone
  • Color: Pulse (Purple)
  • Battery: 1 Lithium Ion battery (rechargeable via USB)
  • Run Time: Up to 120 minutes on full power (after 120-minute charge)
  • Waterproof Rating: IPX7
  • Manufacturer: WOW Tech
  • Model Number: Pulse
ROMP Pulse features: 120 min Run Time, Pleasure Air technology, Waterproof IPX7, Rechargeable

Image: Infographic detailing key features of the ROMP Pulse: 120-minute run time, Pleasure Air technology, IPX7 waterproof rating, and rechargeable battery.

Warranty and Support

ROMP offers a 2-year warranty on all its products. For warranty claims, technical support, or any product-related inquiries, please contact the manufacturer, WOW Tech, or the seller, WOW Tech USA, through their official channels.

Please retain your proof of purchase for warranty validation.

Safety Information

Statements regarding this product have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. Use this product responsibly and according to the instructions provided.

© 2024 ROMP. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.