1. Introduction
Thank you for choosing the isYoung Smart Bird Feeder Camera. This manual provides essential information for setting up, operating, and maintaining your device to ensure a delightful bird-watching experience. This smart bird feeder is equipped with an advanced artificial intelligence camera capable of identifying over 11,000 bird species. Designed with full-color night vision, it captures clear pictures and videos day and night, providing a delightful bird-watching experience for bird lovers. The AI camera notifies you of any feathered visitors via the VicoHome app on your phone, allowing you to enjoy bird watching from anywhere without disturbing the birds.

Figure 1.1: isYoung Smart Bird Feeder Camera with Dual Solar Panels.
Key Features:
- AI Bird Identification: Identifies over 11,000 bird species.
- 2.5K HD Camera & Night Vision: Captures clear footage day and night with a 130-degree wide angle.
- Dual Solar Panels: Provides continuous power, reducing the need for manual charging.
- IP65 Waterproof: Designed for outdoor use in various weather conditions.
- Wi-Fi Connectivity & App Control: Supports 2.4GHz Wi-Fi for remote monitoring and notifications via the VicoHome app.
- Local & Cloud Storage: Offers free cloud storage for up to 7 days and supports TF card storage (not included).
2. Setup Guide
Follow these steps to set up your Smart Bird Feeder Camera.
2.1 Unboxing and Components Check
Carefully unpack all components and ensure the following items are present:
- Smart Bird Feeder Camera Unit
- Dual Solar Panels
- Bird Feeder Stand / Mounting Bracket
- 2.5K Camera (integrated)
- 1.5L Granary (integrated)
- Battery (pre-installed)
- Mounting Hardware (screws, anchors, straps)
2.2 Initial Charging
Before first use, fully charge the integrated 5000 mAh battery using the provided charging cable. The dual solar panels will maintain the charge during operation, but an initial full charge ensures optimal performance.

Figure 2.1: Dual solar panels for continuous operation and built-in 5000 mAh battery charging.
2.3 Mounting the Feeder
The feeder offers versatile mounting options:
- Pole Mount: Attach to a suitable pole using the provided straps or bracket.
- Tree Mount: Securely fasten to a tree trunk with the included straps.
- Wall Mount: Use screws and anchors to mount the feeder to a wall or fence.
Ensure the chosen location has a strong 2.4GHz Wi-Fi signal and receives adequate sunlight for the solar panels. The feeder includes an install-friendly bracket for easy setup.

Figure 2.2: Mounting options for the Smart Bird Feeder Camera.
2.4 Wi-Fi Connection and App Control
- Download the 'VicoHome' app (or 'Birdlover' app as specified in some product descriptions) from your smartphone's app store.
- Create an account and follow the in-app instructions to add your Smart Bird Feeder Camera.
- Ensure your Wi-Fi network is 2.4GHz (5G networks are not compatible).
- Once connected, you can set visitor notification options and access live feeds.
3. Operating Instructions
Learn how to use the advanced features of your Smart Bird Feeder Camera.
3.1 AI Bird Identification and Auto Capture
The integrated AI camera automatically detects and identifies over 11,000 bird species. When a bird visits, the camera will auto-capture images and videos.

Figure 3.1: AI-powered bird identification and real-time app display.
3.2 2.5K HD Camera and Night Vision
The 2.5K HD camera provides exceptionally clear videos and images. With full-color night vision, you can observe birds even in low-light conditions or at night.

Figure 3.2: 6-Layer Full HD Optical Lens and Day/Night Mode comparison.

Figure 3.3: Day and Night Mode functionality.
3.3 Real-time Notifications and Live View
Receive instant notifications on your smartphone when birds are detected. Use the app to view a live feed of your feeder from anywhere.

Figure 3.4: Real-time notifications on your mobile device.
3.4 Storage Options
Captured photos and videos can be stored in two ways:
- Cloud Service: Enjoy up to 7 days of free cloud storage. Extended plans are available via subscription.
- TF Card: Insert a TF card (not included) for local storage.

Figure 3.5: Securely store your bird photos and videos.
3.5 Two-Way Audio (Voice Intercom)
The feeder features a built-in microphone and speaker, allowing for two-way audio communication. This can be used to deter unwanted visitors like squirrels.

Figure 3.6: Using the voice intercom feature to deter squirrels.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your bird feeder.
4.1 Cleaning the Feeder
Regularly clean the feeder to prevent the spread of diseases among birds and to ensure fresh food supply. The feeder features drainage holes and is designed for easy refilling.
- Empty any old or wet birdseed.
- Disassemble the feeder components as needed for thorough cleaning.
- Wash with warm, soapy water and rinse thoroughly. A mild bleach solution (1 part bleach to 9 parts water) can be used for disinfection, followed by a thorough rinse.
- Allow all parts to dry completely before refilling with fresh birdseed.

Figure 4.1: Feeder design features for easy maintenance.
4.2 Battery and Solar Panel Care
The dual solar panels are designed for continuous operation. Ensure they are clean and free from debris (leaves, dust) to maximize charging efficiency. If the battery level drops significantly due to prolonged cloudy weather, you may need to manually charge the camera unit indoors.
4.3 Important Safety Information
To ensure the safety of birds and your property:
- Avoid using food types that may harm birds.
- Secure the feeder to prevent access by larger animals.
- Place the feeder in a safe location to avoid potential hazards.
5. Troubleshooting
If you encounter issues with your Smart Bird Feeder Camera, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera not connecting to Wi-Fi | Incorrect Wi-Fi band (5GHz), weak signal, incorrect password. | Ensure you are connecting to a 2.4GHz network. Move the feeder closer to the router or use a Wi-Fi extender. Double-check your Wi-Fi password. |
| Battery not charging or draining quickly | Insufficient sunlight, dirty solar panels, prolonged cloudy weather. | Relocate the feeder to an area with more direct sunlight. Clean the solar panels regularly. If necessary, bring the camera indoors for a full charge using the USB cable. |
| Poor image/video quality | Dirty camera lens, low light conditions, network interference. | Gently clean the camera lens. Ensure adequate lighting for optimal performance (night vision will activate in low light). Check Wi-Fi signal strength. |
| No bird detection or notifications | Motion detection settings, app notification settings, feeder placement. | Check motion detection sensitivity in the app. Ensure app notifications are enabled on your phone. Verify feeder is placed in an area birds frequent. |
If the problem persists, please contact customer support for further assistance.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | isYoung |
| Model Number | 1 |
| Target Species | Bird watching, nature observation |
| Material | High quality ABS |
| Special Features | AI Auto-Capture & Motion Detection, Solar Powered, Cloud Storage, AI identify 11,000+ bird species, 2.5K HD Resolution, Mobile App Monitoring |
| Mounting Type | Freestanding |
| Product Dimensions | 1"L x 1"W x 1"H |
| Power Source | Battery Powered (1 Lithium Ion battery included) |
| Included Components | Solar Panel, Bird Feeder Stand, 2.5K Camera, 1.5L Granary, Battery |
| Capacity | 1.5 Liters |
| Item Weight | 2.61 pounds |
7. Warranty Information
The isYoung Smart Bird Feeder Camera comes with a standard manufacturer's warranty. Please refer to the product packaging or contact customer support for specific warranty terms and conditions. Keep your purchase receipt as proof of purchase for any warranty claims.
8. Support
For technical support, troubleshooting assistance, or any inquiries regarding your isYoung Smart Bird Feeder Camera, please contact our customer support team. Contact information can typically be found on the product packaging, the official isYoung website, or within the VicoHome app.
We are committed to providing excellent service and ensuring your satisfaction with our product.


