ECHTPower Wireless PC Gaming Controller Instruction Manual

1. Introduction

Thank you for choosing the ECHTPower Wireless PC Gaming Controller. This versatile controller is designed to enhance your gaming experience across multiple platforms, including PC, Nintendo Switch, iOS, and Android devices. Featuring advanced Hall Effect joysticks, a high 1000Hz polling rate, and customizable RGB lighting, it offers precise control, rapid response, and personalized aesthetics. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

Image: The ECHTPower Wireless PC Gaming Controller, showcasing its ergonomic design and button layout.

2. Product Features

Hall Effect Joysticks: Experience ultra-precise control with magnetic sensors, eliminating stick drift and dead zones. These joysticks are designed for exceptional durability, rated for 500 million cycles.
Image: Detailed view of the Hall Effect Joysticks, emphasizing their precision and durability.
1000 Hz Polling Rate (2.4GHz/Wired): Ensures your commands are registered with minimal delay, providing a competitive edge in fast-paced games.
Image: A visual representation illustrating the high 1000Hz polling rate of the controller compared to others.
Multi-Platform Compatibility: Seamlessly connect to PC, Nintendo Switch, iOS, and Android devices via Bluetooth, 2.4G wireless, or USB-C.
Image: The controller shown with multiple compatible devices, highlighting its universal compatibility.
800mAh Long-Lasting Battery: Enjoy up to 15 hours of continuous playtime on a single charge, minimizing interruptions during gaming sessions.
9 Colorful Lights & 4 Modes: Customize your gaming setup with adjustable RGB lighting on the joysticks, offering Rainbow Flow, Steady, Breathing, and Off modes.
Image: The controller displaying its adjustable RGB lighting feature on the joysticks.
Conductive Adhesive Key: Designed for enhanced durability, comfort, and quieter operation of the buttons.
Image: An internal view of the controller highlighting the conductive adhesive key design for improved button performance.

3. Setup and Connection

The ECHTPower controller offers three primary connection methods: 2.4G Wireless, Bluetooth, and Wired (USB-C).

3.1. Mode Switch

Locate the mode switch on the back of the controller. This switch allows you to select the desired connection mode:

2.4G Wireless (PC/Android TV/Laptop): For use with the included USB dongle.
Bluetooth (Android/iOS/Tablet/Steam Deck): For wireless connection to compatible devices without a dongle.
NS (Nintendo Switch/Switch Lite/Switch OLED): Dedicated mode for Nintendo Switch consoles.

Close-up of the mode switch on the back of the controller

Image: The physical mode switch on the back of the controller for easy switching between connection types.

3.2. Connecting via 2.4G Wireless (PC/Android TV/Laptop)

Set the mode switch on the back of the controller to the "2.4G" position.
Insert the included 2.4G USB dongle into an available USB port on your PC, Android TV, or laptop.
The controller will automatically connect to the dongle. The indicator light on the controller will stabilize once connected.

User connecting 2.4G wireless dongle to a laptop

Image: A user inserting the 2.4G wireless dongle into a laptop's USB port.

3.3. Connecting via Bluetooth (Android/iOS/Tablet/Steam Deck)

Set the mode switch on the back of the controller to the "BT" (Bluetooth) position.
On your device (Android phone/tablet, iOS device, Steam Deck), go to Bluetooth settings and search for new devices.
Select "ECHTPower Controller" (or similar name) from the list of available devices to pair. The controller's indicator light will stabilize upon successful pairing.

User holding controller with a phone in the background, indicating Bluetooth connection

Image: The controller positioned near a smartphone, illustrating its Bluetooth connectivity.

3.4. Connecting via NS (Nintendo Switch)

Set the mode switch on the back of the controller to the "NS" position.
On your Nintendo Switch, navigate to "Controllers" > "Change Grip/Order".
Press and hold the SYNC button on the controller until the indicator lights begin to flash. The controller will pair with the Switch.

User holding controller while playing on a Nintendo Switch

Image: A user actively playing a game on a Nintendo Switch using the ECHTPower controller.

3.5. Connecting via Wired (USB-C)

Connect one end of the USB-C cable to the controller and the other end to an available USB port on your PC, Android TV, or Steam Deck.
The controller will be recognized automatically as a wired gamepad.

User connecting controller via USB-C cable to a laptop

Image: A user connecting the controller to a laptop using a USB-C cable for wired gameplay.

3.6. Visual Guide to Connectivity

Video: This video demonstrates the various connection methods (2.4G, Bluetooth, Wired) and the mode switch on the ECHTPower Wireless PC Gaming Controller, along with showcasing its Hall Effect joysticks, customizable lighting, and multi-platform compatibility.

4. Operating Instructions

4.1. Power On/Off

Power On: Press the Home button (ECHTPower logo) to turn on the controller.
Power Off: Press and hold the Home button for 3-5 seconds to turn off the controller. The controller will automatically power off after 5 minutes of inactivity when not connected, or after 10 minutes when connected but idle.

4.2. Button Layout and Functions

Familiarize yourself with the controller's button layout:

A/B/X/Y Buttons: Standard action buttons.
D-Pad: Directional pad for precise movement.
Left/Right Analog Joysticks: For 360-degree movement and camera control.
L1/R1 (Shoulder Buttons): Top-mounted buttons.
L2/R2 (Trigger Buttons): Analog triggers for nuanced input, especially useful in racing games.
Home Button: Powers on/off the controller, returns to home screen on Switch.
Screenshot Button: Captures screenshots (functionality varies by platform).
Plus (+) / Minus (-) Buttons: Equivalent to Start/Select or Plus/Minus on Switch.
M Button: Dedicated button for Turbo function activation.

4.3. Adjusting RGB Lighting

The controller features customizable RGB lighting around the joysticks. To cycle through the 4 available modes (Rainbow Flow, Steady, Breathing, Off) and 9 colors, refer to the specific button combination in your quick start guide or experiment with the lighting control button if present (not explicitly detailed in provided data, common for such controllers).

4.4. Turbo Function

The "M" button on the controller is used to activate and manage the Turbo function, allowing for rapid, repeated input of a button press.

Activate Turbo: Press and hold the "M" button, then press the desired action button (e.g., A, B, X, Y, L1, R1, L2, R2). The button will now continuously register input as long as it's held down.
Deactivate Turbo: Repeat the activation process (hold "M" and press the same action button) to turn off Turbo for that specific button.

4.5. Vibration Adjustment

The controller features adjustable vibration feedback. Specific instructions for adjusting vibration intensity are typically found in the quick start guide or through a combination of buttons (e.g., Home button + D-pad up/down). Refer to the included quick start guide for precise steps.

5. Maintenance

Cleaning: Use a soft, dry cloth to wipe the controller. For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals or abrasive cleaners.
Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
Battery Care: To prolong battery life, avoid fully discharging the controller frequently. Charge the controller regularly, even if not in constant use. Do not expose the battery to high temperatures.

6. Troubleshooting

Problem	Possible Cause	Solution
Controller does not power on.	Low battery.	Charge the controller using the provided USB-C cable.
Controller does not connect wirelessly.	Incorrect mode selected; out of range; interference; pairing issue.	Ensure the mode switch is set correctly (2.4G, BT, or NS). Move closer to the receiver/device. Try re-pairing the controller (refer to Section 3). Ensure no other strong wireless signals are causing interference. For 2.4GHz, note that range can be affected by obstacles and distance.
Buttons or joysticks are unresponsive/drifting.	Software glitch; physical obstruction; rare hardware issue.	Restart the controller and the connected device. Ensure no debris is lodged around buttons or joysticks. If issues persist, contact customer support.
Vibration is too strong/weak or not working.	Vibration setting needs adjustment; game does not support vibration.	Adjust vibration intensity (refer to Section 4.5). Verify that the game you are playing supports vibration feedback.

7. Specifications

Model: Wireless PC Gaming Controller (EP01)
Connectivity: 2.4G Wireless, Bluetooth, USB-C Wired
Polling Rate: 1000 Hz (2.4G/Wired)
Battery Capacity: 800mAh
Estimated Playtime: Up to 15 hours
Dimensions: 10 x 2 x 2.7 inches
Item Weight: 10.5 ounces
Manufacturer: ECHTPower
First Available: January 20, 2025

8. Warranty and Support

ECHTPower stands behind the quality of its products. For warranty information, technical support, or any inquiries regarding your Wireless PC Gaming Controller, please contact ECHTPower customer service through the official website or your point of purchase. Please retain your proof of purchase for warranty claims.

For the most up-to-date support resources and FAQs, please visit the ECHTPower official support page.

	ECHTPOWER EP01 Wireless Gamepad User Manual Comprehensive user manual for the ECHTPOWER EP01 Wireless Gamepad, covering setup, connection (PC, Switch, Android, iOS), and advanced features. Get the most out of your gaming experience.
	Echtpower EP01 Wireless Gamepad User Manual Comprehensive user manual for the Echtpower EP01 Wireless Gamepad, detailing setup, compatibility, features, and warnings for PC, Nintendo Switch, Android, and iOS devices.
	ECHTPOWER EP01 Wireless Gamepad User Manual - PC, Switch, Android, iOS Comprehensive user manual for the ECHTPOWER EP01 Wireless Gamepad. Learn how to connect and use your gamepad with PC, Nintendo Switch, Android, and iOS devices, including features like Turbo and custom lighting.
	ECHTPOWER EP05 Wireless Gamepad User Manual User manual for the ECHTPOWER EP05 Wireless Gamepad. Learn how to connect and use this versatile controller with PC, Nintendo Switch, Android, and iOS devices. Features include Bluetooth, wired, and receiver connectivity, turbo functions, and calibration.
	Echtpower NS Gamepad ES01 User Manual User manual for the Echtpower NS Gamepad ES01, detailing its features, specifications, connection methods, and operation for Nintendo Switch, PC, Android, and iOS devices.
	ECHTPOWER EP01 Wireless Gamepad User Manual - Setup and Features Guide Comprehensive user manual for the ECHTPOWER EP01 Wireless Gamepad. Learn how to connect to PC, Nintendo Switch, Android, and iOS devices via wireless, wired, or Bluetooth. Features include Turbo mode, vibration, and RGB lighting.