Srliya AN101
Srliya AN101 Noncontact Voltage Detector Pen User Manual
Model: AN101 (Srliya8prxwkuv27)
Introduction
The Srliya AN101 Noncontact Voltage Detector Pen is a versatile tool designed for safely detecting AC voltage and identifying live and neutral wires. Its non-contact inductive probe allows for easy and secure operation, making it an essential device for electricians, DIY enthusiasts, and anyone working with electrical systems. This manual provides detailed instructions on how to use, maintain, and troubleshoot your AN101 voltage tester.
Safety Information
WARNING: Always test known live circuits before use to ensure the device is functioning correctly. Do not use if the device appears damaged or is not operating as expected.
- Ensure the operating voltage is within the specified range (AC 12-1000V).
- Do not attempt to open or modify the device.
- Keep the device dry and clean.
- This device is rated CAT.III 1000V and CAT.IV 600V. Always adhere to safety standards for the environment you are working in.
- Replace batteries promptly when the low battery indicator appears.
Product Overview
The AN101 features a compact pen-style design with an NCV inductive probe, an LCD indicator screen, and an integrated LED flashlight.
Figure 1: Angled view of the AN101 Voltage Tester, highlighting its compact design, LCD screen, and control buttons.
Figure 2: Front view of the AN101 Voltage Tester, showing the full length of the device and the NCV probe tip.
Setup
Battery Installation
The AN101 requires two 1.5V AAA batteries (not included). To install the batteries:
- Unscrew the battery cap at the bottom of the tester.
- Insert two AAA batteries, ensuring correct polarity (+/-).
- Screw the battery cap back on securely.
Figure 3: The AN101 Voltage Tester with its battery cap removed, showing the battery compartment for AAA batteries.
Operating Instructions
Power On/Off
Press the power button (G symbol) to turn the device on. Press and hold the power button to turn it off.
AC Voltage Detection (NCV Mode)
The AN101 uses a non-contact voltage (NCV) inductive probe to detect AC voltage. Simply place the tip of the tester near a terminal strip, outlet, or power cord. When voltage is detected:
- The pen tip will glow red.
- The device will emit an audible beep.
- The LCD screen will indicate the presence of voltage.
The frequency of the beep and the intensity of the red light will increase as the tester gets closer to the voltage source or detects higher voltage.
Neutral/Live Wire Judgement
The device automatically detects and distinguishes between live and neutral wires:
- Live Wire: When a live wire is detected, the LCD screen will display red, and the device will beep at a higher frequency.
- Neutral Wire or Ground Line: When a neutral or ground line is detected, the LCD screen will display green, and the buzzer will beep slowly.
To identify a neutral wire, hold the sensor end of the test pencil close to the object. If the simulated grid point lights up green and the buzzer beeps slowly, it indicates a neutral wire.
Adjusting NCV Sensitivity
The NCV seek sensitivity can be toggled by pressing the 'S' key. This allows for adjustment based on the testing environment and desired detection range.
LED Flashlight
The AN101 includes a bright white LED flashlight for working in dimly lit environments. Press the flashlight button (light bulb symbol) to turn it on or off.
Maintenance
To ensure the longevity and accuracy of your Srliya AN101 Voltage Tester, follow these maintenance guidelines:
- Cleaning: Wipe the device with a dry, clean cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the tester in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
- Battery Replacement: Replace batteries as soon as the low battery indicator appears to ensure accurate readings and proper operation.
- Inspection: Periodically inspect the device for any signs of damage, such as cracks in the casing or a damaged probe tip. Do not use if damaged.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Dead or incorrectly installed batteries. | Check battery polarity. Replace with new 1.5V AAA batteries. |
| Inconsistent or no voltage detection. | Low battery; incorrect sensitivity setting; interference. | Replace batteries. Adjust NCV sensitivity using the 'S' key. Ensure no strong electromagnetic interference. |
| Flashlight not working. | Low battery; flashlight button not pressed correctly. | Replace batteries. Press the flashlight button firmly. |
| Incorrect live/neutral wire indication. | Weak signal; environmental factors. | Ensure the probe is close to the wire. Test on a known live/neutral circuit to verify functionality. |
Specifications
| Parameter | Value |
|---|---|
| Model | AN101 |
| Material | ABS |
| Battery | 2 x 1.5V AAA Battery (not included) |
| Operating Voltage (AC) | 12-1000V, 50/60Hz |
| Alarm Mode | Sound and Light Alarm, Display Indication |
| Lighting | White LED Flashlight |
| NCV Sensitivity | Adjustable via 'S' key |
| LCD Indicator Screen | Red for Live Line, Green for Neutral/Ground Line |
| Operating Temperature | 0~40℃ / 32-104℉ |
| Storage Temperature | -10~50℃ / 14-122℉ |
| Humidity | ≤95% |
| Altitude | ≤2000m |
| Safety Class | CAT.III 1000V, CAT.IV 600V CE |
| Dimensions | Approx. 6.3 x 1.18 x 1.18 inches |
| Weight | Approx. 1.83 ounces (without batteries) |
Warranty and Support
For warranty information and technical support, please refer to the product packaging or contact Srliya customer service directly. Contact details are typically available on the manufacturer's official website or through your point of purchase.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.