CorLiving Everly Twin Size Day Bed with Trundle (Model BCF-131-S) Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your CorLiving Everly Twin Size Day Bed with Trundle. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

The CorLiving Everly Day Bed is designed to offer both seating and sleeping solutions, featuring a robust wood frame, upholstered finish, and a convenient pull-out trundle bed. Its contemporary design with a tufted backrest and nailhead trim enhances any living space.

Safety Information

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all bolts, screws, and connectors are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not use power tools for assembly unless specifically instructed, as this may overtighten and damage components.
• Keep small parts away from children during assembly to prevent choking hazards.
• Do not stand or jump on the day bed or trundle.
• Maximum weight limit for the day bed and trundle is 198 pounds (89.81 kg) each. Do not exceed this limit.

Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, contact customer support immediately.

• Headboard
• Side Panels
• Trundle Frame
• Slats for Day Bed
• Slats for Trundle
• Hardware Pack (screws, bolts, washers, Allen key)
• Assembly Guide (this document)

Image: All components of the CorLiving Everly Day Bed with Trundle laid out for assembly.

Setup and Assembly Instructions

Assembly is required for this product. It is recommended that two adults assemble the day bed. Please follow the steps below carefully.

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Compare them with the "Package Contents" list and the hardware diagram in your separate assembly guide to ensure everything is present.
2. Assemble the Main Day Bed Frame: Attach the side panels to the headboard and footboard using the provided bolts and washers. Ensure all connections are snug but do not overtighten initially.
3. Install Day Bed Slats: Place the main bed slats across the frame and secure them according to the assembly guide. Ensure even spacing and secure attachment for proper mattress support.
4. Assemble the Trundle Frame: Construct the trundle frame, attaching its side panels and wheels as instructed.
5. Install Trundle Slats: Secure the trundle slats to the trundle frame.
6. Insert Trundle: Carefully slide the assembled trundle into position under the main day bed frame.
7. Final Tightening: Once all components are in place, go back and securely tighten all bolts and screws. Do not overtighten.

Image: The CorLiving Everly Day Bed with Trundle, functioning as a stylish sofa in a living space.

Operating Instructions

Using the Day Bed

The main day bed functions as both a seating area and a primary sleeping surface. Place a standard twin-size mattress (not included) on the slats. For seating, arrange pillows against the backrest for comfort.

Image: The main day bed surface with a mattress and decorative pillows, ready for use as a sofa or bed.

Using the Trundle Bed

The trundle bed provides an additional sleeping area, conveniently stored beneath the main day bed.

1. To Extend: Gently pull the trundle frame out from under the main day bed using the integrated handle or front panel. The wheels will allow it to slide smoothly.
2. To Retract: Push the trundle frame back under the main day bed until it is fully concealed. Ensure no bedding or objects obstruct its movement.

Image: The trundle bed partially extended from beneath the main day bed, demonstrating its pull-out functionality.

Image: The trundle bed fully extended, ready for use as an additional sleeping surface.

Maintenance and Care

• Cleaning: The upholstery fabric is polyester. Spot clean only. Use a clean, damp cloth with mild soap for spills. Blot gently; do not rub. Test any cleaning solution on an inconspicuous area first.
• Dusting: Regularly dust the upholstered surfaces with a soft brush or vacuum with an upholstery attachment.
• Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain structural integrity.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fading of the fabric.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, strong detergents, or chemical solvents, as these can damage the fabric and finish.

Image: Detail of the dark grey polyester upholstery with tufting and nailhead trim, highlighting the fabric texture.

Troubleshooting

Specifications

Image: Detailed dimensional drawing of the CorLiving Everly Day Bed with Trundle, indicating length, width, and height measurements for both the main bed and the trundle.

Warranty Information

This CorLiving Everly Twin Size Day Bed with Trundle is covered by a 1-Year Limited Manufacturer's Warranty. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage resulting from improper assembly, misuse, abuse, accidents, or normal wear and tear. Please retain your proof of purchase for warranty claims.

Customer Support

For assistance with assembly, missing parts, or warranty claims, please contact CorLiving customer support.

• Manufacturer: CorLiving
• Address: 2252 190 St, Surrey, BC V3Z 3W7
• Please refer to your original purchase documentation for the most current contact information, including phone numbers or email addresses.