Introduction
Thank you for purchasing the BLOKEES Hero Infinity Galaxy Version Wave 3 9-Piece PDQ action figures. This manual provides essential information for the assembly, operation, and care of your collectible figures. Each figure is designed with 17 points of articulation and features removable armor pieces, allowing for dynamic posing and customization.
Package Contents
Your BLOKEES Hero Infinity Galaxy Version Wave 3 package contains:
- 9 x BLOKEES Hero Infinity Galaxy Version Wave 3 Figures
- Assorted removable armor pieces for each figure
- Various accessories (weapons, etc.)
- Exclusive battle cards (if included in specific sets)
Note: The exact contents may vary slightly based on the specific 9-piece assortment received.
Setup and Assembly
Follow these steps to assemble your BLOKEES figures:
- Unboxing: Carefully remove each figure and its components from the packaging. Inspect all parts to ensure nothing is missing or damaged.
- Identify Components: Each figure typically consists of a main body and several removable armor pieces (e.g., shoulder pads, chest armor, leg armor, helmets) and weapons.
- Attach Armor: Gently snap or slide the designated armor pieces onto the corresponding slots on the figure's body. Refer to the visual guide below for common attachment points. Ensure a secure fit without forcing the pieces.
- Attach Weapons/Accessories: Insert weapons or other accessories into the figure's hands or designated attachment points.
Figure Assembly Overview: This image displays a variety of Blokees figures from the Hero Infinity Galaxy Version Wave 3, showcasing their distinct designs, removable armor, and accompanying weapons. The figures are arranged in two rows, illustrating the diverse characters and their individual components. The top row features figures in green, purple, gold, and blue armor, each with a unique weapon. The bottom row includes figures in gold, red, and black armor, along with a red and gold mechanical horse figure and another purple-armored figure. This visual serves as a general guide for identifying parts and understanding the assembled appearance of the figures.
Operating the Figures (Articulation)
Your BLOKEES figures are designed with 17 points of articulation, allowing for a wide range of poses. To articulate the figures:
- Joint Movement: Gently bend and rotate the joints at the neck, shoulders, elbows, wrists, waist, hips, knees, and ankles.
- Avoid Excessive Force: Do not apply excessive force when moving joints, as this may cause damage. If a joint feels stiff, try wiggling it gently to loosen it.
- Removable Armor: Armor pieces can be removed and reattached to customize the figures or to facilitate posing.
Maintenance and Care
Proper care will ensure the longevity of your BLOKEES figures:
- Cleaning: Wipe figures with a soft, dry cloth to remove dust. For stubborn dirt, a slightly damp cloth can be used, but avoid harsh chemicals or abrasive cleaners.
- Storage: Store figures away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation.
- Handling: Handle figures by their main body parts rather than small accessories or delicate armor pieces to prevent breakage.
- Small Parts Warning: These figures contain small parts and are not suitable for children under 3 years of age due to choking hazards. Recommended age is 15 years and up.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Missing pieces upon unboxing | Manufacturing error or packaging issue. | Contact BLOKEES customer support with proof of purchase and details of missing parts. |
| Armor pieces do not attach securely | Incorrect alignment or minor manufacturing variation. | Ensure pieces are aligned correctly. Apply gentle, even pressure. If still loose, a tiny drop of non-permanent adhesive (e.g., clear hobby glue) can be used for display purposes, but this will reduce removability. |
| Joints are stiff or difficult to move | New figure stiffness or slight friction. | Gently work the joint back and forth. Avoid forcing. A very small amount of silicone-based lubricant (not oil-based) can be applied if necessary, but use sparingly. |
| Figure falls over easily | Improper posing or loose leg joints. | Adjust the figure's stance to distribute weight evenly. Ensure feet are flat on the surface. If joints are too loose, consider using a display stand (not included) or gently tightening joints if possible (requires advanced hobbyist skills and may void warranty). |
Specifications
- Model Number: 85028
- Product Dimensions: 8 x 8 x 5 inches (packaging)
- Item Weight: 1.18 pounds (total package)
- Figure Height: Approximately 7.5 cm (3.95 inches)
- Articulation Points: 17 per figure
- Recommended Age: 15 years and up
- Manufacturer: Blokees
Warranty and Support
For warranty information, missing parts, or technical support, please contact BLOKEES customer service. Refer to the packaging or the official BLOKEES website for the most current contact details.
Online Support: Visit the BLOKEES Store on Amazon
