Introduction
Thank you for choosing the Hello Kitty 50th Anniversary Wireless Bluetooth Earbuds. These earbuds combine iconic Hello Kitty design with advanced audio technology, offering a seamless listening experience and hands-free calling. This manual provides essential information on setup, operation, maintenance, and troubleshooting to ensure optimal performance and enjoyment of your new earbuds.
What's in the Box
- Hello Kitty 50th Anniversary Wireless Bluetooth Earbuds (Left and Right)
- Rotating Charging Case
- USB Charging Cable
- User Manual
Product Overview




Setup
Charging the Earbuds and Case
- Charge the Case: Connect the provided USB charging cable to the USB-C port on the back of the rotating charging case and plug the other end into a USB power source (e.g., computer, wall adapter). The charging indicator light on the case will illuminate.
- Charge the Earbuds: Place the earbuds into their respective slots inside the charging case. Ensure they are properly seated. The earbuds will begin charging automatically.
- Charging Time: A full charge for the earbuds takes approximately 1 hour. The charging case provides additional power for extended use, offering up to 4 hours of playtime per charge of the earbuds.
Bluetooth Pairing
- Power On: Open the charging case. The earbuds will automatically power on and enter pairing mode.
- Activate Bluetooth: On your device (smartphone, tablet, etc.), go to the Bluetooth settings and ensure Bluetooth is enabled.
- Select Device: Look for "Hello Kitty Earbuds" or a similar name in the list of available Bluetooth devices. Select it to connect.
- Confirmation: Once successfully paired, you will hear an audio prompt from the earbuds, and the device's Bluetooth settings will show them as connected.
- Automatic Reconnection: After initial pairing, the earbuds will automatically connect to the last paired device when removed from the case, provided Bluetooth is enabled on the device.
Operating Instructions
Power On/Off
- Power On: Open the charging case, and the earbuds will automatically power on.
- Power Off: Place the earbuds back into the charging case and close the lid. They will automatically power off and begin charging.
Music Playback
- Play/Pause: Tap either earbud once.
- Next Track: Double-tap the right earbud.
- Previous Track: Double-tap the left earbud.
Call Management
- Answer/End Call: Tap either earbud once during an incoming call or during an active call.
- Reject Call: Press and hold either earbud for 2 seconds during an incoming call.
- Built-in Microphone: The earbuds feature a built-in microphone for clear hands-free calling.
Flip Face Feature
The unique rotating charging case features a 'flip face' mechanism. Gently rotate the top part of the case to reveal different Hello Kitty expressions, adding a fun and interactive element to your earbuds.
Maintenance
- Cleaning: Use a soft, dry, lint-free cloth to clean the earbuds and charging case. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the earbuds in their charging case to protect them and keep them charged. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Water: While durable, these earbuds are not waterproof. Avoid exposing them to excessive moisture or submerging them in water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Earbuds not pairing | Earbuds are not in pairing mode; Bluetooth is off on device; Earbuds are already connected to another device. | Ensure earbuds are removed from case; Turn Bluetooth on/off on your device; Disconnect from other devices and try pairing again. |
| No sound or low volume | Volume too low on device; Earbuds not properly seated in ear; Earbuds not connected. | Increase volume on your device; Adjust earbud position; Reconnect earbuds to your device. |
| Charging issues | Cable not connected properly; Charging port is dirty; Faulty cable/adapter. | Ensure cable is securely connected; Clean charging port gently; Try a different USB cable or power adapter. |
| Sound distortion after prolonged use | Low battery; Interference. | Recharge earbuds fully; Move away from sources of strong electromagnetic interference. |
Specifications
| Feature | Specification |
|---|---|
| Model Name | Wireless Earbuds |
| Model Number | HKTWSR504-MFN |
| Connectivity Technology | Wireless |
| Wireless Communication Technology | Bluetooth |
| Charging Time | 1 Hour (Earbuds) |
| Playtime per Charge | Up to 4 hours |
| Frequency Range | 20 Hz - 20,000 Hz |
| Impedance | 32 Ohm |
| Control Method | Voice |
| Manufacturer | Southern Telecom |
| UPC | 680079024086 |
Warranty and Support
This product is manufactured by Southern Telecom. For any warranty claims or technical support inquiries, please refer to the contact information provided on the product packaging or visit the manufacturer's official website. Please retain your proof of purchase for warranty validation.