1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Z-Lite 919S-MGLD-LED Forest Wall Sconce. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image 1.1: Front view of the Z-Lite 919S-MGLD-LED Forest Wall Sconce in Modern Gold finish.
2. Safety Information
WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper wiring can result in electric shock or fire.
- Always turn off the main power supply at the circuit breaker before installing or performing any maintenance on the fixture.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections are made in accordance with local codes and ordinances, as well as the National Electrical Code (NEC).
- Do not install this fixture in wet locations. It is designed for indoor use only.
- Handle the fixture with care to avoid damage.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning). Wash hands after handling.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact Z-Lite customer support.
- Z-Lite 919S-MGLD-LED Forest Wall Sconce Fixture (1)
- Mounting Hardware Kit (1)
- Instruction Manual (This document)
Image 3.1: Detailed view of the sconce, showing the backplate and attachment point.
4. Setup and Installation
Follow these steps carefully to install your wall sconce. Professional installation is recommended if you are not familiar with electrical wiring.
- Prepare for Installation:
- Turn off the electrical power at the main circuit breaker or fuse box.
- Ensure the wall surface is clean, dry, and structurally sound to support the fixture.
- Unpack the fixture and its components, laying them out on a clean, flat surface.
- Attach Mounting Plate:
- Secure the mounting plate (usually included in the hardware kit) to the electrical junction box in the wall using the provided screws. Ensure it is firmly attached.
- Make Electrical Connections:
- Connect the fixture's ground wire (bare copper or green) to the house ground wire (bare copper or green) using a wire connector.
- Connect the fixture's neutral wire (white) to the house neutral wire (white) using a wire connector.
- Connect the fixture's hot wire (black) to the house hot wire (black) using a wire connector.
- Carefully tuck all wires into the junction box.
- Mount the Fixture:
- Align the fixture's backplate with the mounting plate and secure it using the decorative nuts or screws provided. Ensure the fixture is flush against the wall and stable.
- Restore Power:
- Once the fixture is securely installed and all connections are made, restore power at the circuit breaker.
- Test the light fixture to ensure proper operation.
5. Operating Instructions
The Z-Lite 919S-MGLD-LED Forest Wall Sconce is designed for simple operation.
- Power On/Off: Control the fixture using a standard wall switch connected to the electrical circuit.
- Dimming Functionality: This fixture is compatible with most standard LED dimmers. If you wish to use the dimming feature, ensure your wall switch is a compatible dimmer switch. Follow the dimmer manufacturer's instructions for optimal performance.
6. Maintenance
The Z-Lite 919S-MGLD-LED Forest Wall Sconce features an integrated LED light source designed for long-term, maintenance-free illumination.
- Cleaning: To clean the fixture, ensure power is off at the circuit breaker. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- LED Replacement: The LED light source is integrated and not user-replaceable. If the LED fails, the entire fixture may need to be replaced. Contact Z-Lite customer support for assistance.
7. Troubleshooting
If you encounter issues with your wall sconce, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims improperly. |
|
|
| Fixture is hot to the touch. |
|
|
If these solutions do not resolve the issue, contact Z-Lite customer support.
8. Specifications
| Model Number | 919S-MGLD-LED |
| Brand | Z-Lite |
| Finish | Modern Gold |
| Material | Alloy Steel |
| Product Dimensions (L x W x H) | 3.25" x 4.75" x 13.75" |
| Back Plate Dimensions (W x L) | 4.75" x 4.75" |
| Light Source Type | Integrated LED |
| Number of Light Sources | 2 |
| Wattage | 5 watts (per light source, total 10W) |
| Voltage | 120 Volts |
| Light Color | Warm White |
| Installation Type | Wall Mount |
| Indoor/Outdoor Usage | Indoor |
| Assembly Required | Yes |
| Item Weight | 2 Pounds |
| UPC / GTIN | 685659203868 |
9. Warranty Information
The Z-Lite 919S-MGLD-LED Forest Wall Sconce comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty documentation included with your purchase or visit the official Z-Lite website. Keep your proof of purchase for warranty claims.
10. Customer Support
For technical assistance, missing parts, or warranty inquiries, please contact Z-Lite customer support directly. You can typically find contact information on the manufacturer's website or on the product packaging.
Manufacturer: Z-Lite
Website: www.z-lite.com (Example link, actual link may vary)
