Gosvor LiteVac 800-FR

Gosvor LiteVac 800-FR Robotic Pool Cleaner Instruction Manual

Model: LiteVac 800-FR

Gosvor LiteVac 800-FR robotic pool cleaner positioned next to a swimming pool.

Image: Gosvor LiteVac 800-FR robotic pool cleaner positioned next to a swimming pool.

1. Introduction

Thank you for choosing the Gosvor LiteVac 800-FR Robotic Pool Cleaner. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference. The LiteVac 800-FR is designed for efficient cleaning of above-ground pools, featuring a cordless design, automatic parking, and a 65-minute cleaning cycle.

2. Safety Information

Always observe the following safety precautions to reduce the risk of injury or damage to the product.

  • Read all instructions carefully before operating the cleaner.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Ensure the charging adapter is used only with the specified power supply.
  • Do not operate the cleaner if the power cord or charger is damaged.
  • Do not operate the cleaner while people are in the pool.
  • Keep the cleaner out of reach of children and pets when not in use.
  • Only use original replacement parts and accessories.
  • Do not attempt to disassemble or repair the cleaner yourself. Contact customer support for assistance.

3. Package Contents

Verify that all items are present in the package:

  • Gosvor LiteVac 800-FR Robotic Pool Cleaner
  • Charging Adapter
  • Retrieval Hook
  • User Manual (this document)

4. Product Overview

Familiarize yourself with the main components of your Gosvor LiteVac 800-FR.

Gosvor LiteVac 800-FR Robotic Pool Cleaner, top view, yellow-green handle.

Image: Top view of the Gosvor LiteVac 800-FR Robotic Pool Cleaner, highlighting its compact design and yellow-green handle.

  • Main Unit: The body of the cleaner housing the motor and battery.
  • Handle: For easy lifting and retrieval of the cleaner.
  • Power Button: To turn the cleaner ON/OFF.
  • Charging Port: Located on the side, for connecting the charging adapter.
  • Filter Basket: Accessible from the top, collects debris.

5. Setup

5.1 Charging the Cleaner

Before first use, fully charge the cleaner. A full charge takes approximately 3 hours.

  1. Ensure the cleaner is dry before charging.
  2. Connect the charging adapter to the charging port on the cleaner.
  3. Plug the adapter into a suitable power outlet.
  4. The indicator light on the cleaner will show charging status (refer to product for specific light indications).
  5. Once fully charged, disconnect the adapter from the cleaner and the power outlet.
Detailed view of the Gosvor LiteVac 800-FR pool cleaner showing its internal components.

Image: A diagram illustrating the internal components of the Gosvor LiteVac 800-FR, including the charging port location.

5.2 Initial Placement

Ensure the filter basket is correctly installed before placing the cleaner in the pool.

6. Operating Instructions

Follow these steps to operate your robotic pool cleaner:

  1. Submerge the Cleaner: Gently lower the cleaner into the pool until it is fully submerged and air bubbles stop escaping.
  2. Activate: Press the power button to start the cleaning cycle. The cleaner will begin moving across the pool floor.
  3. Cleaning Cycle: The LiteVac 800-FR operates for approximately 65 minutes. It will automatically park itself near the edge of the pool when the battery is low or the cleaning cycle is complete.
  4. Retrieval: Use the provided retrieval hook to carefully pull the cleaner out of the water by its handle.
  5. Power Off: Press the power button again to turn off the cleaner.

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your cleaner.

7.1 Cleaning the Filter Basket

Clean the filter basket after each use or when visibly dirty.

  1. Open the cleaner's cover to access the filter basket.
  2. Remove the filter basket.
  3. Empty any collected debris.
  4. Rinse the filter basket thoroughly with a garden hose to remove fine particles.
  5. Reinsert the clean filter basket and close the cover securely.
Diagram illustrating the filter removal process for the Gosvor LiteVac 800-FR.

Image: A diagram showing how to access and remove the filter basket for cleaning on the Gosvor LiteVac 800-FR.

7.2 Storage

When not in use for extended periods:

  • Clean the cleaner thoroughly and ensure it is completely dry.
  • Store the cleaner in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Charge the battery periodically (e.g., every 3 months) to maintain battery health.

8. Troubleshooting

If you encounter issues with your Gosvor LiteVac 800-FR, refer to the following table:

ProblemPossible CauseSolution
Cleaner does not start.Battery is low or depleted.Charge the cleaner for 3 hours.
Cleaner moves slowly or stops.Filter basket is full or clogged.Clean the filter basket.
Obstruction in the wheels or brushes.Remove any debris (hair, leaves) from wheels/brushes.
Poor cleaning performance.Filter basket is dirty.Clean the filter basket thoroughly.
Battery is not fully charged.Ensure the cleaner is fully charged before use.
Cleaner does not park automatically.Battery is completely depleted before parking sequence.Ensure the cleaner is fully charged for optimal runtime and parking.

If the problem persists after trying these solutions, please contact customer support.

9. Specifications

FeatureSpecification
BrandGosvor
Model NameLiteVac 800-FR
MaterialPlastic
ColorYellow-Green
Product Dimensions (L x W x H)28L x 17.5W x 34.3H cm
Power SourceBattery Powered
Special FeaturesCordless, Portable, Lightweight
Control MethodApplication (Implied: On-device button for basic operation)
Battery TypeLithium-ion (1 included)
Battery Capacity28.08 Watt-hours
Charge Time3 hours
Runtime65 minutes
Installation TypeRobotic

10. Warranty and Support

The Gosvor LiteVac 800-FR comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Gosvor customer service through the retailer where you purchased the product or visit the official Gosvor website.

Please have your model number (LiteVac 800-FR) and purchase date ready when contacting support.

© 2026 Gosvor. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.