Introduction
Thank you for choosing the Netzu W318B Wooden Digital Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read this guide thoroughly to ensure proper use and to fully utilize all features.
Package Contents
- Netzu W318B Wooden Digital Alarm Clock
- DC Power Cable
- US Plug Adapter
- User Manual (this document)
Image: The alarm clock shown with its included DC power cable and US plug adapter, illustrating that it is outlet powered.
Product Overview
The Netzu W318B features a clear digital display and intuitive controls for easy operation. The clock is designed with a wooden finish, making it a stylish addition to any room.
Controls and Display
Image: Rear view of the alarm clock, highlighting the control buttons and speaker. Labels indicate DST, SET, and Snooze/Light buttons.
- DST Button: Long press to turn DST mode on/off (1 hour forward/back).
- SET Button: Short press to switch between 12/24-hour format. Long press to set the time.
- SNOOZE/LIGHT Button: Short press to enable/disable the alarm. Long press to set the alarm. Also functions as snooze during an active alarm and adjusts brightness.
- Volume Buttons (+/-): Adjust alarm volume.
- Ringtone Button: Select alarm ringtone.
Image: The alarm clock displaying its dimensions: approximately 6.5 inches wide, 2.7 inches high, and 2 inches deep.
Setup
Powering On
- Connect the DC power cable to the DC 5V port on the back of the alarm clock.
- Plug the US plug adapter into a standard electrical outlet.
- The clock display will illuminate, indicating it is powered on.
Initial Time Setting
- Long press the SET button until the hour digits begin to flash.
- Use the Volume +/- buttons to adjust the hour.
- Press the SET button again to move to the minute digits.
- Use the Volume +/- buttons to adjust the minutes.
- Press the SET button once more to confirm the time and exit time setting mode.
Operating Instructions
Setting the Alarm
- Long press the SNOOZE/LIGHT button until the alarm hour digits begin to flash.
- Use the Volume +/- buttons to adjust the alarm hour.
- Press the SNOOZE/LIGHT button again to move to the alarm minute digits.
- Use the Volume +/- buttons to adjust the alarm minutes.
- Press the SNOOZE/LIGHT button once more to confirm the alarm time.
Enabling/Disabling the Alarm
- Short press the SNOOZE/LIGHT button to toggle the alarm on or off. An alarm icon will appear on the display when the alarm is active.
Adjusting Alarm Volume
- During alarm setting or when the alarm is sounding, use the Volume +/- buttons to adjust the alarm volume. There are 5 volume levels (L-01 to L-05).
Image: The alarm clock highlighting the 5 selectable volume levels, from L-01 (lowest) to L-05 (highest).
Selecting Ringtones
- During alarm setting, press the Ringtone button to cycle through the 12 available alarm tones.
Image: The alarm clock displaying various ringtone options, including Beeping, Ringing, Piano, Chime, Lullaby, and Light Music, from a selection of 12.
Adjusting Display Brightness
- Short press the SNOOZE/LIGHT button (when the alarm is not sounding) to cycle through 4 levels of brightness and an 'OFF' setting for the display.
Image: The alarm clock demonstrating its 5 brightness settings, ranging from 100% to completely off, allowing for customization based on ambient light.
Snooze Function
- When the alarm sounds, press the SNOOZE/LIGHT button to activate the 5-minute snooze function. The alarm will sound again after 5 minutes.
Image: A hand reaching to press the Snooze button on the alarm clock, illustrating the 5-minute snooze feature.
Daylight Saving Time (DST) Adjustment
- Long press the DST button to move the time forward by one hour (for DST start) or backward by one hour (for DST end). A 'DST' indicator will appear on the display when active.
Image: The alarm clock demonstrating the manual DST adjustment feature and the ability to switch between 12-hour and 24-hour time formats.
12/24 Hour Format
- Short press the SET button to switch between 12-hour and 24-hour time display formats. In 12-hour format, 'AM' or 'PM' will be displayed.
Maintenance
- Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Keep the clock away from direct sunlight, extreme temperatures, and high humidity.
- Ensure the clock is placed on a stable surface to prevent accidental falls.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock display is off. | No power supply. | Ensure the power cable is securely plugged into the clock and the wall outlet. Check if the outlet is functional. |
| Alarm does not sound. | Alarm is not enabled or volume is too low. | Short press the SNOOZE/LIGHT button to ensure the alarm icon is displayed. Increase alarm volume using the Volume +/- buttons. |
| Time is incorrect. | Time was not set correctly or DST is active/inactive. | Re-set the time following the 'Initial Time Setting' instructions. Check DST setting. |
| Display is too bright/dim. | Brightness setting needs adjustment. | Short press the SNOOZE/LIGHT button (when alarm is not sounding) to cycle through brightness levels. |
Specifications
- Brand: Netzu
- Model Number: W318B
- Color: Wood
- Display Type: Digital
- Style: Retro
- Special Feature: Adjustable Volume, Manual DST, Snooze
- Product Dimensions: 9"W x 3.15"H (approx. 6.5"W x 2.7"H x 2"D based on image)
- Power Source: Corded Electric (AC power)
- Room Type: Bedroom, Living Room, Office
- Material: Plastic (Frame Material: Wood)
- Item Weight: 12.7 ounces (0.36 Kilograms)
- Alarm Clock: Yes
- Number of Items: 1
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Netzu customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.