GIGABYTE B860M DS3H

Download PDF
Contents

GIGABYTE B860M DS3H Motherboard User Manual

1. Introduction

This manual provides detailed instructions for the installation, configuration, and maintenance of your GIGABYTE B860M DS3H Motherboard. Please read this manual thoroughly before installing your system to ensure correct operation and to maximize performance.

GIGABYTE B860M DS3H Motherboard and packaging

Image 1.1: The GIGABYTE B860M DS3H Motherboard shown with its retail packaging. This image provides a general overview of the product and its branding.

2. Setup and Installation

2.1 Component Overview

Familiarize yourself with the motherboard layout and key components before beginning installation.

Top-down view of GIGABYTE B860M DS3H Motherboard with components labeled

Image 2.1: A top-down view of the GIGABYTE B860M DS3H Motherboard, highlighting the CPU socket (LGA 1851), DDR5 DIMM slots, PCIe slots, M.2 slots, and various headers and connectors. This image is crucial for identifying component locations during installation.

2.2 CPU Installation

  1. Carefully open the CPU socket lever.
  2. Align the CPU (Intel Core Ultra Series) with the socket, ensuring the triangular mark on the CPU matches the mark on the socket.
  3. Gently place the CPU into the socket without forcing it.
  4. Close the socket lever to secure the CPU.

2.3 Memory (RAM) Installation

  1. Open the clips on both ends of the DDR5 DIMM slots.
  2. Align the memory module with the slot, matching the notch on the module to the key in the slot.
  3. Press down firmly on both ends of the memory module until the clips snap into place.
  4. For dual-channel operation, refer to the motherboard's specific slot recommendations (typically slots A2 and B2 first).

2.4 Storage Device Installation (M.2 SSDs)

  1. Locate the M.2 slots on the motherboard. The B860M DS3H features 1x PCIe 5.0 and 1x PCIe 4.0 M.2 slot.
  2. Remove the M.2 Thermal Guard if present, and the M.2 standoff screw.
  3. Insert the M.2 SSD into the slot at a 30-degree angle.
  4. Gently push the SSD down and secure it with the M.2 standoff screw or EZ-Latch Click mechanism.
  5. Reattach the M.2 Thermal Guard for optimal cooling.

2.5 Expansion Card Installation (PCIe)

  1. Locate the PCIe 5.0 x16 slot for graphics cards and other PCIe slots.
  2. Remove the corresponding expansion slot cover from your PC case.
  3. Align the expansion card with the PCIe slot and press down firmly until it is seated correctly.
  4. Secure the card to the case with a screw or retention clip.

2.6 Power Connections

  • Connect the 24-pin ATX main power connector from your power supply to the motherboard.
  • Connect the 8-pin ATX 12V CPU power connector to the motherboard.
  • Connect any necessary PCIe power cables directly to your graphics card.

2.7 Front Panel and Rear I/O Connections

Connect your case's front panel headers (power button, reset button, USB ports, audio jacks) to the corresponding pins on the motherboard. Refer to the motherboard diagram (Image 2.1) for header locations.

Rear I/O panel of GIGABYTE B860M DS3H Motherboard

Image 2.2: The rear input/output (I/O) panel of the GIGABYTE B860M DS3H Motherboard, showing various ports including USB, LAN, and audio jacks. This panel connects the motherboard to external peripherals.

Connect external peripherals such as keyboard, mouse, monitor, and network cable to the rear I/O panel ports.

3. Operating Your Motherboard

3.1 Initial Power On and BIOS/UEFI Setup

  1. After all components are installed and connected, power on your system.
  2. Press the DEL key repeatedly during startup to enter the BIOS/UEFI setup utility.
  3. Configure essential settings such as boot order, date/time, and enable XMP/EXPO for memory if desired.
  4. Save changes and exit the BIOS/UEFI.

3.2 Driver Installation

After installing your operating system, install the necessary drivers for the motherboard chipset, LAN, audio, and any other integrated components. Drivers can be found on the GIGABYTE official website for your specific motherboard model.

3.3 Operating System Installation

Insert your operating system installation media (USB drive or DVD) and follow the on-screen prompts to install Windows 10 or Windows 11. Ensure your boot order is set correctly in the BIOS/UEFI to boot from the installation media.

4. Maintenance

4.1 Cleaning

  • Regularly clean dust from your PC case and motherboard components using compressed air.
  • Ensure the system is powered off and unplugged before cleaning.
  • Avoid direct contact with components and use short bursts of air.

4.2 BIOS/UEFI Updates

GIGABYTE periodically releases BIOS/UEFI updates to improve stability, compatibility, and performance. Use the Q-Flash Plus feature or the BIOS utility to update the firmware. Always download the correct BIOS version for your motherboard model from the official GIGABYTE website.

5. Troubleshooting

5.1 Common Issues

  • No Power: Check all power connections (24-pin ATX, 8-pin CPU, GPU power). Ensure the power supply is switched on.
  • No Display (No POST): Verify that the monitor is connected and powered on. Reseat the graphics card and RAM modules. Check for any diagnostic LEDs or beep codes on the motherboard.
  • Boot Device Not Found: Check SATA/M.2 cable connections. Verify boot order in BIOS/UEFI. Ensure the operating system is installed correctly on the drive.
  • System Instability/Crashes: Check CPU and GPU temperatures. Ensure all drivers are up to date. Test memory modules individually.

5.2 Q-Flash Plus

The GIGABYTE B860M DS3H supports Q-Flash Plus, allowing you to update the BIOS without installing a CPU, memory, or graphics card. This is useful for compatibility issues with newer CPUs. Refer to the GIGABYTE website for detailed instructions on using Q-Flash Plus.

6. Specifications

FeatureSpecification
BrandGIGABYTE
Model NameB860M DS3H
CPU SocketLGA 1851
Compatible ProcessorsIntel Core Ultra Series CPUs
Chipset TypeIntel B860M
RAM Memory TechnologyDDR5 (4 DIMM slots)
Memory Clock SpeedUp to 9066 MHz (OC)
PCIe Slots1x PCIe 5.0 x16, 1x PCIe 4.0 x16 (x4 mode)
M.2 Slots1x PCIe 5.0 M.2, 1x PCIe 4.0 M.2
LAN2.5GbE LAN
USB PortsUSB 3.2 Gen 2 Type-A, USB 3.2 Gen 1, USB 2.0
Form FactorMicro ATX
Dimensions (LxWxH)9.61 x 9.61 x 1.38 inches
PlatformWindows 10, Windows 11

7. Warranty and Support

7.1 Warranty Information

GIGABYTE motherboards typically come with a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official GIGABYTE website for specific warranty terms and conditions applicable to your region.

7.2 Technical Support

For technical assistance, driver downloads, BIOS updates, or further product information, please visit the official GIGABYTE support website:

https://www.gigabyte.com/support

You may also contact GIGABYTE customer service directly through their website for personalized support.

© 2025 GIGABYTE Technology Co., Ltd. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.