Product Overview
The Intex Salt Steriliser QS700 Plus is designed to treat pool water effectively without the need for traditional chemical chlorine. This system utilizes salt sterilization to prevent chloramines, which are responsible for unpleasant odors and common side effects associated with chlorine. It is suitable for pools up to 32 cubic meters (m³).
Key features include a digital display for easy monitoring, an integrated timer for automated operation, and a digital control panel for user-friendly adjustments. The system is engineered for efficient chlorine production and is compatible with filter pumps providing a flow rate between 3 to 12 m³/h.
Figure 1: Front view of the Intex Salt Steriliser QS700 Plus, showcasing its compact design and integrated control panel.
Setup and Installation
Proper setup is crucial for the optimal performance of your Intex Salt Steriliser. Ensure your pool's filter pump has a flow rate between 3 to 12 m³/h for compatibility.
- Placement: Position the salt steriliser on a stable, level surface near your pool and filter pump. Ensure it is protected from direct sunlight and harsh weather conditions.
- Connections: Connect the steriliser to your pool's filtration system according to the provided diagrams. The unit typically connects in line after the filter pump and before the water returns to the pool. Secure all hose connections tightly to prevent leaks.
- Power Supply: Connect the power cord to a grounded electrical outlet. Ensure the outlet is suitable for outdoor use and protected by a Ground Fault Circuit Interrupter (GFCI).
- Adding Salt: Once the system is connected and filled with water, add the recommended amount of pool-grade salt directly to your pool water. Refer to the specific salinity requirements in the specifications section. Allow the salt to dissolve completely before operating the steriliser.
Figure 2: Rear view of the steriliser, illustrating the inlet and outlet ports for hose connections to the pool filtration system.
Figure 3: Top view of the unit with hoses attached, demonstrating a typical setup configuration.
Operating Instructions
The Intex Salt Steriliser QS700 Plus features a user-friendly digital control panel for easy operation.
Figure 4: Detailed view of the digital control panel, showing various indicators and control buttons.
- Power On/Off: Press the power button (⏻) to turn the unit on or off.
- Digital Display: The digital display shows operational status, error codes, and settings.
- Timer Function: Use the timer button (⏱) to set the desired operating duration. The integrated timer allows for automated daily cycles.
- Mode Selection: The mode button (MODE) allows switching between different operational modes or display units (e.g., ppm, °C/°F).
- Boost Function: The boost button (⚡ BOOST) can be used for a temporary increase in chlorine production, useful after heavy pool use or rainfall.
- Lock/Unlock: Use the lock (LOCK) and unlock (UNLOCK) buttons to prevent accidental changes to settings.
- Salinity Monitoring: The control panel includes an indicator for salinity levels. Ensure the salinity is within the recommended range for efficient operation.
The system works by converting salt in the pool water into natural chlorine, which sanitizes the water. This process continuously generates chlorine, providing a consistent level of sanitation without the need for adding chemical chlorine directly.
Figure 5: Diagram showing the Hydro Aeration Technology, which enhances water circulation and filtration for improved water quality.
Maintenance
Regular maintenance ensures the longevity and efficiency of your salt steriliser.
- Self Clean Function: The unit is equipped with a "Self Clean" function (SELF CLEAN button on the panel). Activate this function periodically to clean the electrolytic cell and prevent mineral buildup.
- Check Cell Indicator: If the "Check Cell" indicator illuminates, it suggests that the electrolytic cell may require manual cleaning or inspection for excessive mineral deposits. Refer to the troubleshooting section for detailed steps.
- Salinity Levels: Regularly test your pool's salt levels to ensure they remain within the optimal range. Low salt levels will reduce chlorine production, while excessively high levels can damage the unit.
- General Cleaning: Keep the exterior of the unit clean and free from debris. Ensure ventilation openings are not obstructed.
Figure 6: The steriliser unit, possibly after operation, showing its robust design.
Troubleshooting
This section provides solutions to common issues you might encounter with your Intex Salt Steriliser QS700 Plus.
| Problem | Possible Cause | Solution |
|---|---|---|
| "Pump Low Flow" Indicator | Insufficient water flow through the unit. | Check if the filter pump is running. Ensure pool hoses are not kinked or blocked. Clean the filter cartridge/sand filter. Verify the filter pump's flow rate meets the minimum requirement (3 m³/h). |
| "Check Cell" Indicator | Electrolytic cell requires cleaning or is faulty. | Run the "Self Clean" cycle. If the issue persists, manually inspect and clean the electrolytic cell for mineral buildup. If the problem continues after cleaning, the cell may need replacement. |
| Low Chlorine Production | Low salt level in the pool, insufficient operating time, or dirty cell. | Test pool salt levels and add salt if necessary. Increase the operating time of the steriliser. Clean the electrolytic cell. Ensure the pool water temperature is within the optimal range. |
| "Salinity" Indicator (Error) | Salt level is too high or too low. | Test pool salt levels accurately. If too low, add salt. If too high, partially drain and refill the pool with fresh water until the correct salinity is achieved. |
Specifications
| Model Number | 26688 |
| Brand | Intex |
| Maximum Pool Volume | Up to 32 m³ |
| Required Filter Pump Flow Rate | 3 to 12 m³/h |
| Product Dimensions (L x W x H) | 13.39 x 16.54 x 11.42 inches |
| Item Weight | 14.43 pounds |
| Features | Digital display, Easy operation, Integrated timer, Digital control panel, Self Clean function |
Warranty and Support
For detailed warranty information, please refer to the warranty card included with your product packaging or visit the official Intex website. Intex provides customer support for product inquiries, technical assistance, and warranty claims.
It is recommended to keep your purchase receipt as proof of purchase for warranty purposes.
For further assistance, please contact Intex customer service through their official channels.
