1. Introduction
This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your new eclife 30" Floating Bathroom Vanity with Sink Combo. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Figure 1: Overview of the eclife 30" Floating Bathroom Vanity.
2. Important Safety Information
WARNING: Always follow the assembly instructions provided. Be cautious when mounting the cabinet to the wall to avoid injury. Keep the area around the cabinet clear during and after installation.
- Ensure all components are present and undamaged before assembly.
- Wear appropriate safety gear (gloves, eye protection) during installation.
- Two people are recommended for lifting and mounting the vanity to prevent injury.
- Verify wall structure can support the weight of the vanity and its contents.
3. Package Contents
The following components are included with your eclife 30" Floating Bathroom Vanity:
- Cabinet (Wall Mounted)
- Faucet
- Instructions Manual
- Sink (Undermount Single Sink)
4. Specifications
| Feature | Detail |
|---|---|
| Brand | eclife |
| Model Name | THKFSF022 |
| Color | Light Walnut |
| Product Dimensions | 18.1"D x 30"W x 18.1"H |
| Mounting Type | Wall Mount |
| Material | Engineered Wood (Frame), SMC (Top) |
| Storage Options | Drawers (2) |
| Assembly Required | Yes |

Figure 2: Detailed dimensions of the vanity components.
5. Setup and Installation
The eclife floating vanity is designed for straightforward assembly. Follow the numbered instructions and diagrams provided in the separate assembly guide for detailed steps.
5.1 Pre-Installation Checks
- Unpack all parts and verify against the parts list.
- Ensure the wall where the vanity will be mounted is structurally sound and can support the weight.
- Locate wall studs for secure mounting. If studs are not available at desired locations, use appropriate heavy-duty wall anchors (not always included).
5.2 Assembly Steps
- Assemble the cabinet frame according to the provided diagrams.
- Install the drawer slides.
- Attach the sink to the cabinet top.
- Install the faucet and drain assembly onto the sink.
5.3 Wall Mounting
- Mark the desired height and level position on the wall.
- Drill pilot holes for the mounting brackets, ensuring they align with wall studs or appropriate anchors.
- Secure the mounting brackets to the wall.
- Carefully lift the assembled vanity and hook it onto the wall brackets.
- Secure the vanity to the brackets using the provided hardware.
- Connect the water supply lines and drain. Test for leaks.

Figure 3: Assembled vanity before final wall mounting.
6. Operating Instructions
6.1 Drawers
The vanity features two spacious drawers for storage. Pull the drawers gently to open and push to close. While not soft-closing, the slides are designed for smooth operation.

Figure 4: Drawers providing ample storage space.
6.2 Faucet and Sink
Operate the faucet by lifting the handle for water flow and adjusting left/right for temperature. The undermount single sink is designed for efficient drainage.

Figure 5: Included faucet design.
7. Maintenance and Care
7.1 Cabinet Care
- Wipe the cabinet surfaces with a soft, damp cloth. Avoid abrasive cleaners.
- Promptly clean up any water spills to prevent damage to the engineered wood.
- Avoid placing extremely hot or cold items directly on the cabinet surface.
7.2 Sink Care
The SMC (Sheet Molding Compound) sink material is designed for easy cleaning and resistance to water stains. Clean with mild soap and water. Avoid harsh chemicals or abrasive pads that could scratch the surface.

Figure 6: Smooth and easy-to-clean SMC sink countertop.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawers do not close smoothly | Misaligned slides or obstructions. | Check drawer slides for proper alignment and ensure no items are blocking the mechanism. |
| Water leaks from plumbing connections | Loose connections or damaged seals. | Tighten all plumbing connections. Inspect and replace any worn or damaged washers/seals. |
| Vanity feels unstable after mounting | Improper wall mounting or insufficient anchors. | Re-evaluate wall mounting. Ensure brackets are securely fastened to studs or appropriate heavy-duty anchors are used. Consult a professional if unsure. |
9. Warranty and Support
Your eclife vanity comes with a 30-day easy return policy. For any questions, assistance with assembly, or to report missing/damaged parts, please contact eclife customer support. Your satisfaction is our priority.
For further assistance, please refer to the contact information provided with your purchase or visit the official eclife store online.