RiceBlock RB0119

Download PDF
Contents

RiceBlock Legend The Master Sword Glowing Building Sets Instruction Manual

Model: RB0119

1. Introduction

Thank you for choosing the RiceBlock Legend The Master Sword Glowing Building Sets. This set allows you to construct a replica of the Master Sword, its display base, and a Korok character model using high-quality building blocks. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure a rewarding building experience.

RiceBlock Master Sword Glowing Building Set components including the box, assembled sword, display base, and Korok figure.

Figure 1.1: Overview of the RiceBlock Master Sword Glowing Building Set.

2. Safety Information

Please read and understand all safety instructions before assembly and use. Keep this manual for future reference.

  • Choking Hazard: This product contains small parts and is not suitable for children under 3 years of age. Adult supervision is recommended for younger builders.
  • Age Recommendation: Manufacturer recommended age is 14 years and up.
  • Material Safety: All building blocks are made from premium ABS material, which is ASTM and CPSIA tested for safety.
  • Handling: Avoid throwing or forcefully impacting the assembled model to prevent damage or injury.
  • Electrical Components: If the glowing feature involves electrical components (e.g., LED lights), ensure they are handled according to instructions. Keep away from water.

3. Package Contents

Before beginning assembly, please verify that all components are present and undamaged. The package includes:

  • 614 pieces of building blocks (premium ABS material)
  • Instruction Manual
  • Components for Master Sword model
  • Components for Display Base model
  • Components for Korok character model
Assembled RiceBlock Master Sword, display base, and Korok figure.

Figure 3.1: All assembled models included in the set.

4. Assembly Instructions

Follow the step-by-step instructions provided in the included paper manual. Organize your building blocks by color and shape to facilitate the assembly process.

  1. Preparation: Unpack all components and lay them out on a clean, flat surface. Sort the building blocks according to the instructions in the paper manual.
  2. Korok Figure Assembly: Begin by assembling the Korok character model. Refer to the specific pages in the manual for this section.
  3. Display Base Assembly: Proceed to assemble the Master Sword's display base. Pay close attention to the structural integrity and any specific details for the glowing mechanism integration.
  4. Master Sword Assembly: Assemble the Master Sword itself. Ensure all glowing elements are correctly positioned as per the manual.
  5. Final Integration: Once all three main components (Korok, Display Base, Master Sword) are assembled, place the Master Sword into its display base.
Assembled Master Sword on its display base next to the Korok figure, prior to activation of the glowing feature.

Figure 4.1: Assembled Master Sword, Display Base, and Korok.

5. Operation (Glowing Feature)

The Master Sword features a glowing effect. Follow these steps to activate it:

  1. Power Source: Identify the power source for the glowing mechanism. This may involve inserting batteries (not included) into a designated compartment within the sword or display base, or activating a built-in light source. Refer to your paper instruction manual for exact details on battery type and installation.
  2. Activation Switch: Locate the activation switch, typically found on the display base or the sword handle.
  3. Turn On: Flip the switch to the "ON" position to illuminate the Master Sword.
  4. Turn Off: Flip the switch to the "OFF" position when not in use to conserve power.
Close-up of the Master Sword glowing brightly while mounted on its display base.

Figure 5.1: Master Sword with glowing feature activated.

The glowing Master Sword on its display base, with the Korok figure beside it, set against a dark background.

Figure 5.2: The complete set with the Master Sword's glowing effect active.

6. Maintenance

Proper care will ensure the longevity and appearance of your building set.

  • Cleaning: Dust the assembled model regularly with a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water and gently wipe. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store the model in a cool, dry place away from direct sunlight to prevent discoloration or material degradation.
  • Disassembly: If disassembling, do so carefully to avoid damaging the interlocking pieces. Store pieces in a container to prevent loss.
  • Battery Replacement (if applicable): If the glowing feature uses batteries, replace them as needed following the instructions in the paper manual. Dispose of old batteries responsibly.

7. Troubleshooting

If you encounter any issues, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Missing piecesPackaging error or pieces lost during unpacking/assembly.Carefully check all packaging materials. If pieces are genuinely missing, contact customer support.
Glowing feature not working
  • Switch is off.
  • Batteries are dead or incorrectly installed (if applicable).
  • Connection issue with LED components.
  • Ensure the switch is in the "ON" position.
  • Replace batteries or check polarity.
  • Review assembly steps for glowing components. If issue persists, contact support.
Pieces do not fit togetherIncorrect piece selection or orientation.Double-check the instruction manual for the correct pieces and their orientation for the current step. Do not force pieces.

For issues not listed here, please contact RiceBlock customer support.

8. Specifications

BrandRiceBlock
Model NumberRB0119
Number of Pieces614
MaterialPremium ABS Plastic
Assembled Product Dimensions (Approximate)
  • Master Sword (main sword): 12 inches (30.5 cm) long, 3.1 inches (7.9 cm) wide, 5.9 inches (15 cm) high
  • Build Base: 4.3 inches (10.9 cm) long, 3.1 inches (7.9 cm) wide, 5.9 inches (15 cm) high
  • Korok Figure: 4.7 inches (11.9 cm) long, 3.5 inches (8.9 cm) wide, 4.1 inches (10.4 cm) high (Note: Original data listed "feet" for figure, corrected to "inches" for consistency with other components and typical toy sizes.)
Overall Product Dimensions (Boxed)20.83 x 15.75 x 6.86 cm
Recommended Age14 years and up
Educational ObjectiveSTEM
Batteries RequiredNo (Note: The product description mentions "glowing" but specifications state "No" for batteries. This implies it might be glow-in-the-dark or a different mechanism. Consult the included paper manual for details.)
Diagram showing the dimensions of the assembled Master Sword on its base and the Korok figure in centimeters and inches.

Figure 8.1: Product dimensions for the assembled models.

9. Warranty Information

Specific warranty details are typically provided with your purchase documentation or on the product packaging. For information regarding product defects or missing parts, please retain your proof of purchase and contact customer support directly.

The buybox winner information indicates a return policy of 45 days for refund/replacement. This is generally handled by the retailer (Amazon in this case) rather than a direct manufacturer warranty for building sets.

10. Customer Support

If you have any questions, require assistance with assembly, or need to report missing/defective parts, please contact RiceBlock customer service.

  • Contact: As per product information, for assembly or installation problems, contact "LordBiulder" directly. This appears to be the seller's name.
  • Online Resources: Check the official RiceBlock website (if available) for FAQs or additional support materials.

Please have your model number (RB0119) and proof of purchase ready when contacting support.

© 2024 RiceBlock. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.