Introduction
Thank you for choosing the Bearhug King Heated Mattress Pad. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new heated mattress pad. Please read all instructions carefully before use and retain this manual for future reference.
The Bearhug King Heated Mattress Pad is designed to provide personalized warmth and comfort, featuring dual controls, 10 heat settings, and an auto-shutoff timer for a restful night's sleep.
Safety Information
IMPORTANT SAFETY INSTRUCTIONS. DO NOT DESTROY.
- Read all instructions before using this heated mattress pad.
- Do not use with infants, children, incapacitated persons, or anyone insensitive to heat.
- Do not use if the mattress pad is wet.
- Do not use with a waterbed.
- Do not use if the power cord or controller is damaged.
- Ensure the mattress pad is properly fitted and secured to prevent shifting.
- Do not use pins or other metallic objects with this product.
- Unplug the mattress pad when not in use.
- This product is ETL-certified, ensuring safety and reliability.
- Features built-in overheat and leakage protection.
Package Contents
- 1 x Bearhug King Heated Mattress Pad (78" x 80")
- 2 x Dual Control Units (for King size)
- Instruction Manual
Setup Instructions
- Unpack: Carefully remove the heated mattress pad and controllers from the packaging.
Image: Bearhug King Heated Mattress Pad laid out on a bed. - Position the Pad: Place the heated mattress pad directly on your mattress, ensuring it is centered and smooth. The pad is designed with a detachable zipper and deep pockets to fit mattresses up to 18 inches.
Image: The mattress pad features elastic deep pockets that fit mattresses up to 18 inches, ensuring a secure fit. - Connect Controllers: For King size, two separate controllers are provided for dual heating zones. Locate the connection ports on the mattress pad and securely plug in each controller. Ensure the connections are firm. The controllers come with 19ft extended power cords for convenience.
Image: Close-up of the dual controllers, showing temperature and timer settings. - Plug In: Plug the power cords of the controllers into a standard electrical outlet.
Operating Instructions
Each controller operates independently for its designated heating zone (A and B). This allows for personalized temperature settings for each side of the bed.
Power On/Off
- Press the Power button on the controller to turn the mattress pad ON or OFF for that zone.
Heat Settings
- The mattress pad offers 10 heat settings, ranging from 90°F to 108°F.
- Use the TEMP+ and TEMP- buttons to adjust the desired heat level for your zone.
Auto Shut-Off Timer
- The timer function allows you to set the operating time for up to 12 hours in 1-hour increments.
- Press the TIMER+ or TIMER- buttons to set the desired auto-shutoff time. The pad will automatically turn off after the set time.
Memory Function
- The controller features a memory function that saves your last used heat and timer settings. When you turn the pad back on, it will resume with your previous preferences.
Fast & Even Heating
The advanced heating technology ensures fast and even heat distribution across the mattress pad, providing consistent warmth throughout the night.
Maintenance
Cleaning Instructions
- The Bearhug Heated Mattress Pad is machine washable.
- Before washing, ensure all controllers are disconnected from the mattress pad and the power outlet.
- Machine wash on a gentle cycle with cold water.
- Tumble dry on low heat or air dry. Do not iron or dry clean.
- Ensure the mattress pad is completely dry before reconnecting controllers and using.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mattress pad not heating. | Not properly plugged in; controller not turned on; power outage. | Ensure all connections are secure and the controller is ON. Check power outlet. |
| Uneven heating. | Mattress pad not spread flat; internal wiring issue. | Ensure the pad is spread smoothly without wrinkles. If problem persists, contact support. |
| Controller display not working. | Loose connection; power issue. | Check power cord connection to the pad and outlet. Try a different outlet. |
| Pad is too hot/not hot enough. | Incorrect heat setting. | Adjust the heat setting using the TEMP+ and TEMP- buttons. |
Specifications
- Brand: Bearhug
- Model: SQM
- Size: King (78" x 80")
- Color: Light Brown-detachable With Zipper
- Fabric Type: Velvet
- Special Features: Deep Pocket (up to 18"), Dual Controls, Washable, Zipper Heated Mattress Pad
- Heat Settings: 10 levels (90°F to 108°F)
- Auto Shut-Off Timer: Up to 12 hours
- Safety Certification: ETL Certified
- Power: Dual 110W controllers
- Item Weight: 12.87 pounds
Warranty and Support
The Bearhug King Heated Mattress Pad is ETL-certified, ensuring it meets recognized safety standards. For any product inquiries, technical support, or warranty claims, please refer to the contact information provided with your purchase documentation or visit the official Bearhug website.
For additional information and product videos, please visit the Bearhug Store on Amazon.
Official Product Videos
Bearhug Electric Heated Mattress Pads With Dual Control
This video demonstrates the dual control functionality of Bearhug electric heated mattress pads, highlighting how each side can be adjusted independently for personalized comfort. It showcases the ease of use and the benefits of having separate temperature zones.
Bearhug Multi-Zone Electric Heated Mattress Pad
This video provides an overview of the Bearhug multi-zone electric heated mattress pad, emphasizing its ability to provide targeted warmth and comfort. It illustrates the product's features and how it enhances the sleeping experience.