ANSTEN AI01

ANSTEN Language Translation Earbuds AI01 User Manual

Model: AI01 (M79AI)

Brand: ANSTEN

1. Introduction

The ANSTEN AI01 Language Translation Earbuds are designed to facilitate seamless communication across language barriers, provide high-quality audio for music, and enable clear phone calls. Featuring advanced AI translation technology and an open-ear design, these earbuds offer comfort and functionality for various uses, including business, travel, and learning.

This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your ANSTEN AI01 earbuds to ensure optimal performance.

2. What's in the Box

Please check the contents of your package to ensure all items are present:

Contents of the ANSTEN AI01 package including earbuds, charging case, USB-C cable, and user manual.

Figure 2.1: Package Contents

3. Product Features

4. Setup

4.1 Charging the Earbuds and Case

Before first use, fully charge the earbuds and the charging case. Connect the provided Type-C charging cable to the charging port on the case and a USB power source. The digital display on the case will indicate the charging status and battery level.

Diagram showing the battery capacities of the earbuds (35mAh) and charging case (300mAh), along with use times.

Figure 4.1: Battery Capacity Overview

4.2 Pairing with Your Device

  1. Ensure the earbuds are in the charging case and the case has sufficient power.
  2. Open the charging case. The earbuds will automatically enter pairing mode.
  3. On your smartphone or Bluetooth-enabled device, go to Bluetooth settings.
  4. Search for "M79" or "Q40" in the list of available devices and select it to connect.
  5. Once connected, you will hear an audio prompt, and the earbuds will be ready for use.

Note: A QR code can only be linked to one Bluetooth device and cannot be linked to multiple Bluetooth devices at the same time.

A smartphone screen showing Bluetooth settings with 'M79' listed as a discoverable device, next to the earbuds and charging case.

Figure 4.2: Bluetooth Pairing

4.3 Wearing the Earbuds

The ANSTEN AI01 earbuds feature an open-ear clip design for comfortable and secure fit. Gently insert the earbud into your ear and tuck the clip behind your ear for stability.

Diagram illustrating how to properly insert and tuck the open-ear earbuds for a secure fit.

Figure 4.3: Proper Wearing Technique

5. Operating Instructions

5.1 Translation Modes

The earbuds support various translation modes via a dedicated smartphone application (refer to the app's instructions for detailed usage):

5.2 Music Playback and Calls

Once paired, the earbuds function as standard Bluetooth headphones for audio playback and phone calls. Use the touch controls as described in Section 6.

6. Touch Controls

The ANSTEN AI01 earbuds feature intuitive touch controls on each earbud. The touch points are located on the outer surface of the earbuds.

Diagram showing touch control functions for the earbuds, including power, call answer/hang up, volume, and track control.

Figure 6.1: Earbud Touch Control Functions

Table 6.1: Touch Control Reference
ActionControlFunction
Power On/OffL/R Touch 2x quicklyTurns the earbuds on or off.
Answer/Hang Up CallPress 1 time L/RAnswers an incoming call or ends an active call.
Reject CallL/R Long press for 2 secondsRejects an incoming call.
Activate Voice AssistantPress L/R for 3 secondsActivates your device's voice assistant (e.g., Siri, Google Assistant).
Play/Pause MusicClick 1xPlays or pauses the current track.
Next TrackR Touch 3x quicklySkips to the next song.
Previous TrackL Touch 3x quicklyGoes back to the previous song.
Volume UpR Touch 1xIncreases the volume.
Volume DownL Touch 1xDecreases the volume.

7. Maintenance

7.1 Cleaning

Regularly clean your earbuds and charging case with a soft, dry, lint-free cloth. Do not use abrasive cleaners, alcohol, or chemical sprays. Avoid getting moisture in any openings.

7.2 Storage

When not in use, store the earbuds in their charging case to protect them and keep them charged. Store in a cool, dry place away from extreme temperatures.

7.3 Water Resistance

The earbuds are IPX7 waterproof, meaning they can resist sweat and daily splashing. However, they are not designed for swimming or submersion in water. Ensure the charging port is dry before charging.

8. Troubleshooting

Table 8.1: Common Issues and Solutions
ProblemPossible CauseSolution
Earbuds not pairingBluetooth is off; earbuds not in pairing mode; interference.Ensure Bluetooth is enabled on your device. Place earbuds in case, close, then open to re-enter pairing mode. Move closer to your device.
No sound or low volumeVolume too low; earbuds not connected; low battery.Increase volume on both earbuds and connected device. Reconnect earbuds. Charge earbuds and case.
Translation not workingApp not installed or configured; internet connection issues; incorrect mode selected.Ensure the translation app is correctly installed and set up. Check your internet connection. Verify the correct translation mode is selected in the app.
Poor call quality (garbled sound for others)Microphone obstruction; environmental noise; software issue.Ensure microphones are clear. Try using in a quieter environment. Restart earbuds and device. Update earbud firmware if available.
Cannot connect to multiple devices simultaneouslyProduct limitation.The ANSTEN AI01 earbuds are designed to connect to one Bluetooth device at a time. Disconnect from the current device before attempting to connect to another.
Charging case display not workingLow battery in case; faulty cable/charger.Charge the case. Try a different Type-C cable and power adapter.

9. Specifications

Table 9.1: Product Specifications
FeatureDetail
Model NameAI01 (M79AI)
BrandANSTEN
ConnectivityBluetooth 5.4
Translation Languages134+ languages
Earbud Weight4.3 grams per earbud
Earbud Battery LifeUp to 8 hours (single charge)
Total Playtime (with case)Up to 38 hours (8 hours + 30 hours from case)
Charging Time (Earbuds)Approx. 1.5 hours
Charging Time (Case)Approx. 2 hours
Charging PortUSB Type-C
Water ResistanceIPX7
Control MethodTouch
Item Weight (Total)3.52 ounces
Package Dimensions4.57 x 3.62 x 1.54 inches
Country of OriginChina

10. Warranty and Support

ANSTEN products are tested and certified by strict labs. For warranty information, please refer to the warranty card included in your product packaging or visit the official ANSTEN website.

For technical support, troubleshooting assistance, or to access online video user guides, please visit the ANSTEN support page or contact customer service through the details provided on the official ANSTEN website or your purchase platform.

You can find more information and video user guides on the ANSTEN Store Page.

Related Documents - AI01

Preview Ansten K1 Wireless Headphones for TV: Setup and Connection Guide
Comprehensive guide to setting up Ansten K1 wireless headphones for TV viewing. Learn how to connect using Optical, RCA, or AUX audio outputs to Samsung, LG, and Sony TVs. Includes troubleshooting tips and detailed instructions.
Preview HSV379HDMI Coaxial Extender: Instructions and Troubleshooting
Comprehensive guide for the HSV379HDMI coaxial extender, covering setup, matters needing attention, and simple troubleshooting steps for optimal performance.
Preview AS30 Wireless Gaming Headset User Manual
User guide for the AS30 Wireless Gaming Headset, covering product overview, power on/off, pairing, connections, microphone usage, charging, and system settings for Windows.
Preview Ansten Wireless Headphones for Smart TV Watching User Manual
User manual for Ansten wireless headphones, providing setup guides, features, and troubleshooting for smart TV audio, with support for optical, AUX, and RCA inputs.
Preview FCC Grant of Equipment Authorization for ANSTEN AS60 Wireless Headphones
Official FCC Grant of Equipment Authorization for the ANSTEN AS60 wireless headphones, detailing technical specifications, frequency range, and compliance information from Shenzhen maosong keji youxian gongsi.