ECHTPower Wireless Switch Controller

Introduction

Thank you for choosing the ECHTPower Wireless Switch Controller. This controller is designed to enhance your gaming experience across multiple platforms, including Nintendo Switch/Lite/OLED, iOS, Android, PC, and Steam Deck. It features advanced technologies such as Hall Effect Joysticks, customizable RGB lighting, programmable functions, and adjustable vibration. Please read this manual carefully to ensure proper use and maximize your enjoyment.

Product Features

Front view of the ECHTPower Wireless Switch Controller, showcasing its ergonomic design and button layout.

The controller shown alongside various compatible devices, including Nintendo Switch, smartphones, and tablets, highlighting its wide compatibility.

Hall Effect Joysticks

Equipped with Hall Effect sensors, these joysticks utilize electromagnetic induction to provide precise control and eliminate joystick drift. This contactless design ensures fast, accurate responses and a significantly longer lifespan, making them ideal for competitive gaming.

A detailed view of the Hall Effect Joystick, illustrating its advanced sensor technology with a blue glow.

Customizable RGB Lighting

Personalize your controller with 9 unique RGB lighting effects and 4 different modes: Steady, Breathing, Running Horse, and Rainbow. Adjust colors and lighting to match your preference or gaming setup.

The controller displaying various RGB lighting options around the joysticks, with a color palette and mode indicators.

Long Battery Life & Wake-Up Function

The built-in 800mAh rechargeable battery provides 8-16 hours of playtime on a full charge (2-3 hours charging time). The controller also features a convenient wake-up function, allowing you to power on your Nintendo Switch from standby by pressing the "Home" button.

An illustration of the controller's internal 800mAh battery, emphasizing its large capacity for extended playtime.

Programmable Macro & Turbo Functions

Gain a competitive edge with programmable macros. Assign multiple functions to the M1 or M2 buttons for one-touch access to complex moves. The Turbo mode offers three speed settings to enhance gameplay in action-packed titles, reducing repetitive button presses.

Rear view of the controller highlighting the M1 and M2 programmable macro buttons with blue backlighting.

The controller with an overlay illustrating the Turbo function, showing rapid button presses.

Adjustable Vibration & 6-Axis Gyro

Immerse yourself in games with dual vibration motors offering 4 intensity levels: strong, medium, weak, or off. The 6-axis gyro sensors provide accurate motion control, adding realism to your gaming experience.

The controller with visual indicators for different vibration intensity levels (0%, 30%, 70%, 100%).

Setup

Connecting to Nintendo Switch/Switch Lite/OLED

1. On your Switch HOME Menu, select Controllers > Change Grip/Order.
2. Press and hold the Home button on the ECHTPower controller for 3-5 seconds until the LED indicators start flashing.
3. Once connected, the corresponding player LED(s) on the controller will light up solid.
4. To wake up the Switch from sleep mode, simply press the Home button on the controller.

Connecting to PC (Wired/Wireless)

Wired Connection: Connect the controller to your PC using a USB-C cable. The controller will be recognized as a standard gamepad.

Wireless Connection (Bluetooth):

1. Ensure your PC has Bluetooth enabled.
2. Go to Bluetooth & other devices settings on your PC.
3. Select Add Bluetooth or other device > Bluetooth.
4. Press and hold the Home button on the controller for 3-5 seconds until the LED indicators flash rapidly.
5. Select the ECHTPower controller from the list of available devices and pair.

Connecting to iOS/Android Devices

1. Enable Bluetooth on your iOS or Android device.
2. Press and hold the Home button on the controller for 3-5 seconds until the LED indicators flash rapidly.
3. Select the ECHTPower controller from the list of available Bluetooth devices and pair.

Operating Instructions

Adjusting RGB Lighting

Press the Light button (usually located near the Home button) to cycle through the 9 RGB lighting effects and 4 modes (Steady, Breathing, Running Horse, Rainbow). Press and hold the Light button to turn off the lighting.

Setting Turbo Function

1. Press and hold the button you wish to set Turbo for (e.g., A, B, X, Y, L, R, ZL, ZR).
2. While holding the button, press the Turbo button (T button). The button will now have Turbo enabled.
3. To adjust Turbo speed, press the Turbo button and then move the Right Analog Stick Up/Down to cycle through three speed settings (slow, medium, fast).
4. To clear Turbo for a single button, repeat step 1 and 2. To clear all Turbo settings, press and hold the Turbo button for 5 seconds.

Programming Macro Functions (M1/M2 Buttons)

1. Press and hold the M1 or M2 button you wish to program.
2. While holding M1/M2, press the M button (Macro button). The controller will vibrate slightly, indicating it's in programming mode.
3. Input the sequence of buttons you want to record (e.g., A, B, X, Y, L, R, ZL, ZR, D-pad directions, analog stick movements).
4. Press the M button again to save the macro. The controller will vibrate again to confirm.
5. To use the macro, simply press the programmed M1 or M2 button.
6. To clear a macro, press and hold the M1 or M2 button, then press the M button twice.

Adjusting Vibration Intensity

Press the Vibration button (usually located near the Home button) and then move the Left Analog Stick Up/Down to cycle through the 4 vibration intensity levels (Strong, Medium, Weak, Off).

Maintenance

• Cleaning: Use a soft, dry cloth to clean the controller. Do not use abrasive cleaners or solvents.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the controller frequently. Charge it regularly, even if not in use for extended periods.
• Avoid Drops: While durable, avoid dropping the controller to prevent internal damage.

Troubleshooting

Controller Not Connecting/Pairing

• Ensure the controller is charged.
• Verify Bluetooth is enabled on your device and the controller is in pairing mode (LEDs flashing rapidly).
• Try restarting both the controller and your device.
• If connecting to Switch, ensure you are on the 'Change Grip/Order' screen.
• For PC, try a wired connection first to confirm functionality.

Input Lag or Unresponsive Inputs

• Ensure there are no strong wireless interferences nearby (e.g., Wi-Fi routers, other Bluetooth devices).
• Move closer to the console/device.
• Check for firmware updates for the controller (refer to ECHTPower support website).
• If issues persist, try resetting the controller (locate a small reset hole, usually on the back, and use a pin to press it).

Controller 'Spazzing Out' or Hyper-Responding

• This could indicate a connectivity issue. Follow the steps for 'Controller Not Connecting/Pairing'.
• Ensure the controller's battery is not critically low.
• Perform a controller reset.
• If the problem persists, contact ECHTPower customer support for further assistance.

Specifications

Warranty and Support

ECHTPower is committed to providing high-quality products and customer satisfaction. This controller is designed for durability and reliable performance. If you encounter any technical problems or have questions regarding your ECHTPower Wireless Switch Controller, please do not hesitate to contact our customer support team. We aim to reply within 24 hours and provide comprehensive support.

For the latest support information, FAQs, and potential firmware updates, please visit the official ECHTPower website or refer to the contact information provided with your product packaging.