1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Maxxima 2-inch 5 CCT Adjustable Slim Trimless Recessed LED Eyeball Gimbal Downlight. Please read this manual thoroughly before installation and retain it for future reference.
Image 1.1: Front view of the Maxxima 2-inch Slim Trimless Recessed LED Eyeball Gimbal Downlight, showing the integrated LED and the trimless plaster frame.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- Ensure the supply voltage is 120V AC.
- Do not attempt to modify the fixture.
- Suitable for damp and wet locations.
- IC Rated for direct contact with insulation.
- Always wear safety glasses and gloves during installation.
3. Package Contents
Verify that all components are present before beginning installation:
- Maxxima 2-inch Slim Trimless Recessed LED Eyeball Gimbal Downlight (Integrated LED)
- Junction Box (Power Supply)
- Installation Manual (this document)
Image 3.1: The recessed LED downlight connected to its power supply junction box.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | MRL-S208105 |
| Brand | Maxxima |
| Power Source | 120V AC |
| Wattage | 8 Watts |
| Brightness | 600 Lumens |
| Color Temperature (CCT) | 2700K, 3000K, 3500K, 4000K, 5000K (Selectable) |
| Dimming Range | 10% - 100% |
| Rotation | 360 degrees |
| Tilt Angle | 30 degrees (15 degrees each side) |
| CRI | 90 |
| Fixture Diameter | 3.7 inches |
| Fixture Depth | 3.3 inches |
| Spackle Frame Width | 0.6 inches |
| Junction Box Dimensions | 4.7" L x 2.05" W x 1.8" H |
| Recommended Hole Cutout | 2.6 inches diameter |
| Material | Cast Aluminum |
| Certifications | ETL, IC Rated, Wet Rated |
| Lifetime Hours | 50,000 hours |
5. Installation Instructions
This trimless recessed downlight is designed for new construction or remodel applications where a clean, flush finish is desired. No traditional recessed can or housing is required.
- Prepare the Opening: Cut a 2.6-inch diameter hole in the ceiling at the desired location. Ensure there is sufficient clearance above the ceiling for the fixture and junction box.
- Install the Plaster Frame: Insert the trimless plaster frame into the cutout. Secure the frame to the sheetrock using appropriate screws. The frame should be flush with the ceiling surface.
- Plaster and Paint: Apply plaster over the trimless frame, blending it seamlessly with the ceiling. Allow to dry, then sand and paint the ceiling as desired. This creates the "trimless" effect.
- Wiring the Junction Box:
- Turn off power at the circuit breaker.
- Open the junction box cover.
- Remove the appropriate knockout(s) on the junction box.
- Connect the supply wires to the junction box wires: Black to Black (Live), White to White (Neutral), Green/Bare Copper to Green (Ground). Secure connections with wire nuts.
- Close the junction box cover and secure it.
- Connect Fixture to Junction Box: Feed the junction box through the plaster frame opening. Connect the fixture's male connector to the female connector on the junction box. Ensure a secure connection.
- Insert and Secure Fixture: Carefully push the LED downlight fixture into the plaster frame opening. Twist the fixture clockwise to engage the twist locks and secure it firmly into the frame.
Image 5.1: Diagram illustrating the frameless recessed design and how to screw the plaster frame to the sheetrock before plastering.
Image 5.2: Illustration of how to push up and twist the integrated LED fixture to unlock it from the hidden trim, demonstrating the twist-lock mechanism.
6. Operating Instructions
Once installed, the Maxxima LED Downlight offers versatile lighting control.
6.1 Color Temperature (CCT) Selection
The fixture features 5 selectable color temperatures. Before final installation of the fixture into the ceiling, locate the CCT selection switch on the back of the provided junction box. Use this switch to choose your preferred light color:
- 2700K: Soft White
- 3000K: Warm White
- 3500K: Bright White
- 4000K: Neutral White
- 5000K: Daylight
Image 6.1: Close-up of the 5 CCT selection switch located on the junction box, allowing users to choose between different color temperatures.
Image 6.2: Visual representation of the five selectable color temperatures (2700K, 3000K, 3500K, 4000K, 5000K) and their corresponding light appearances.
6.2 Dimming Functionality
This downlight is dimmable from 10% to 100%. Ensure you use a compatible LED dimmer switch for optimal performance. Refer to your dimmer switch's instructions for proper operation.
6.3 Adjusting Light Direction
The eyeball gimbal design allows for precise light direction. The fixture can rotate 360 degrees and tilt up to 30 degrees (15 degrees to each side). Gently adjust the inner light module to direct the light as needed.
Image 6.3: Diagram illustrating the 360-degree rotation and 30-degree tilt capability (15 degrees on each side) of the eyeball gimbal downlight.
7. Maintenance
The Maxxima LED Downlight requires minimal maintenance.
- Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners.
- LED Longevity: The integrated LED is designed for 50,000 hours of operation and does not require bulb replacement.
8. Troubleshooting
If you experience issues with your downlight, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose wiring; faulty switch. | Check circuit breaker. Verify all wire connections are secure. Test the switch. |
| Light flickers or dims improperly. | Incompatible dimmer switch; loose wiring. | Ensure an LED-compatible dimmer is used. Check wiring connections. |
| Incorrect color temperature. | CCT switch set incorrectly. | Access the junction box and adjust the CCT selection switch to the desired setting. |
If troubleshooting steps do not resolve the issue, contact Maxxima customer support.
9. Warranty and Support
This Maxxima LED Downlight is backed by a 3-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims or technical support, please contact Maxxima customer service. Keep your proof of purchase for warranty validation.
Additional protection plans may be available for purchase:
- 3-Year Protection Plan
- 4-Year Protection Plan
- Complete Protect (monthly plan covering multiple purchases)
For more information, visit the Maxxima Store on Amazon.
