1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Angoily Stainless Steel Tubular Deadbolt Lock. Designed for interior doors such as bedrooms and bathrooms, this lock offers enhanced privacy and security. Please read these instructions carefully before installation and use to ensure proper function and longevity of the product.
2. Product Features
- Durable Construction: Made from high-quality stainless steel for long-lasting performance and resistance to corrosion.
- Secure Latching Mechanism: Features a robust cylindrical lock tongue knob designed for reliable security.
- Versatile Application: Suitable for various interior settings including hotels, bathrooms, and toilets.
- Modern Design: A simple and generous appearance that complements contemporary interior aesthetics.
- Easy Installation: Designed for straightforward installation on wood doors.
3. Package Contents
Please verify that all components are present before beginning installation.
- Tubular Deadbolt Lock Assembly
- Strike Plate
- Plastic Spacer/Dust Box
- Mounting Screws
Figure 3.1: All components of the Angoily Tubular Deadbolt Lock, including the main lock body, strike plate, and plastic spacer.
4. Safety Information
- Always wear appropriate safety gear, such as gloves and eye protection, during installation.
- Ensure the door is stable and properly supported before drilling or making any modifications.
- Keep small parts away from children to prevent choking hazards.
- Do not use excessive force when installing or operating the lock, as this may cause damage.
5. Setup and Installation
Follow these steps for proper installation of your tubular deadbolt lock.
- Prepare the Door: Ensure your door has the necessary bore holes for a tubular latch. The lock is designed for standard door preparations. Refer to Figure 5.1 for dimensions.
- Insert the Latch Mechanism: Slide the tubular deadbolt lock assembly into the bore hole on the edge of the door. Ensure the faceplate is flush with the door edge and secure it with screws.
- Install the Strike Plate: Align the strike plate with the latch mechanism on the door frame. Mark and chisel out the area for the strike plate to sit flush. Secure the strike plate with screws. If applicable, insert the plastic spacer/dust box into the frame before securing the strike plate.
- Test Operation: Once installed, test the lock mechanism by closing the door and engaging the deadbolt to ensure smooth operation and proper alignment.
Figure 5.1: Key dimensions of the tubular deadbolt lock. Length is approximately 3.1 inches (8 cm) and width is 2.2 inches (5.6 cm).
Figure 5.2: The tubular deadbolt lock assembly inserted into the door edge, showing the faceplate and strike plate components.
6. Operating Instructions
The Angoily Tubular Deadbolt Lock is designed for simple and intuitive operation.
- To Lock: From the inside, rotate the knob or lever on the lock assembly to extend the deadbolt into the strike plate on the door frame.
- To Unlock: From the inside, rotate the knob or lever in the opposite direction to retract the deadbolt from the strike plate.
Figure 6.1: A hand demonstrating the operation of the tubular deadbolt lock on an interior door.
7. Maintenance
To ensure the longevity and smooth operation of your lock, follow these simple maintenance guidelines:
- Cleaning: Wipe the lock surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the stainless steel finish.
- Lubrication: Periodically apply a small amount of graphite lubricant or silicone spray to the internal mechanism to maintain smooth operation. Do not use oil-based lubricants as they can attract dust.
- Inspection: Regularly check all screws and components for tightness. Tighten any loose screws to prevent misalignment or malfunction.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lock is stiff or hard to turn. | Lack of lubrication; debris in mechanism. | Apply graphite lubricant or silicone spray. Clean any visible debris. |
| Deadbolt does not fully extend or retract. | Misalignment with strike plate; loose screws. | Check alignment of lock and strike plate. Adjust if necessary. Tighten all mounting screws. |
| Lock rattles or feels loose. | Loose mounting screws. | Tighten all screws securing the lock assembly and strike plate. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Angoily |
| Model Number | 2504RDH1J194 |
| Material | Stainless Steel |
| Color | Silver |
| Style | Modern |
| Item Dimensions (L x W x H) | 3.15 x 2.2 x 0.98 inches (8 x 5.6 x 2.5 cm) |
| Item Weight | 4.16 ounces (118 grams) |
| Included Components | Deadbolt assembly |
10. Warranty and Support
Angoily is committed to providing high-quality products. For any questions, concerns, or support needs regarding your tubular deadbolt lock, please refer to your purchase documentation or contact the retailer where the product was purchased. Please retain your proof of purchase for warranty claims.