Introduction
Thank you for choosing the VASAGLE Metal Bed Frame. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read these instructions carefully before beginning assembly and retain them for future reference.
Safety Warnings
- Pay attention to sharp edges during assembly and use.
- Do not exceed the maximum weight capacity of 454 kg (1000 lbs).
- Always follow the assembly instructions to ensure stability and prevent collapse.
- Ensure all connections are securely tightened before use.
Package Contents
Before assembly, please verify that all components listed below are present in your package:
- Metal Bed Frame Components
- Slatted Base (Lattes de maintien)
- Foot Pads (Patins)
- Assembly Hardware (Screws, Allen key, etc.)
- Instruction Manual (this document)
Setup and Assembly Instructions
Assembly of this bed frame is designed to be straightforward. We recommend assembling with two people. Lay out all parts on a soft, clean surface to prevent scratches.
Step-by-Step Assembly
- Unfold the Frame: The bed frame features a foldable design for easy setup. Carefully unfold the main frame sections.
Image: Unfolding the main bed frame sections, part of the easy assembly process.
- Attach Support Legs: Securely attach any central support legs to the main frame using the provided hardware. Ensure they are firmly in place.
Image: Attaching a support leg to the frame, ensuring stability.
- Install Side Rails: Connect the side rails to the head and foot sections of the bed frame. Tighten all bolts securely.
Image: Connecting side rails to the bed frame, a crucial step for structural integrity.
- Insert Slats: Place the metal slats into the designated slots on the side rails. The slats are designed for easy insertion into lateral hooks.
Image: Inserting a metal slat into the frame's side hooks, demonstrating the easy assembly feature.
Ensure all plastic connectors for the slats are properly rotated and secured to minimize noise and provide stable support.
Image: Detail of the plastic connectors for the slats, designed for silent operation and peaceful sleep.
- Attach Foot Pads: Install the protective foot pads on the bottom of each leg to prevent floor scratches and reduce noise.
Image: Attaching a protective foot pad to a bed leg to safeguard your flooring.
- Final Check: Before placing your mattress, double-check all bolts and connections to ensure they are tight and secure.
Operating Instructions
Mattress Placement
Place your mattress directly onto the assembled slatted base. The bed frame is designed to accommodate a mattress of 160 x 200 cm. Integrated mattress stoppers at the head and foot of the frame prevent accidental mattress slippage.
Image: Bed frame with mattress, highlighting the mattress stopper to prevent movement.
Weight Capacity
The bed frame is constructed with robust metal tubes and 9 support legs, providing a stable foundation. It can support a maximum static load of 454 kg (approximately 1000 lbs).
Image: The bed frame's robust structure with 9 support legs, indicating a 500 kg (1100 lbs) weight capacity for reliable support.
Under-Bed Storage
The design provides a generous clearance of 31.6 cm (12.4 inches) between the floor and the bed frame, allowing for ample under-bed storage. This space is also sufficient for robotic vacuum cleaners to pass underneath for easy cleaning.
Image: Illustration of the 31.6 cm under-bed clearance, suitable for storage boxes and robot vacuums, optimizing space.
Headboard Attachment
Pre-drilled holes are provided at the head and foot of the bed frame for attaching a headboard (not included). This allows for customization according to your preference. Note that adding a headboard may extend the overall length of the bed frame by approximately 10 cm.
Image: Detail of the pre-drilled holes for attaching an optional headboard.
Maintenance
- Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
- Regular Checks: Periodically inspect all bolts and connections to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaking.
- Avoid Overloading: Do not exceed the maximum weight capacity of 454 kg to prevent structural damage.
Troubleshooting
- Squeaking Noises:
- Ensure all bolts are securely tightened.
- Verify that the plastic connectors for the slats are correctly installed and not damaged.
- Instability/Wobbling:
- Check that all legs are firmly on the ground and not bent.
- Re-tighten all assembly hardware.
- Ensure the bed frame is on a level surface.
- Mattress Slipping:
- Confirm that the integrated mattress stoppers are correctly positioned at the head and foot of the frame.
Specifications
| Model Number | RMB135B01 |
| Brand | VASAGLE |
| Material | Metal |
| Color | Matte Black |
| Overall Dimensions (L x W x H) | 200 x 160 x 35.6 cm (78.7 x 63 x 14 inches) |
| Under-Bed Clearance | 31.6 cm (12.4 inches) |
| Compatible Mattress Size | 160 x 200 cm (Queen/King equivalent in some regions) |
| Weight Capacity (Static) | 454 kg (1000 lbs) |
| Assembly Required | Yes |
Image: Detailed diagram illustrating the bed frame's dimensions and weight capacity.
Warranty and Support
For any questions, missing parts, or assistance with assembly, please contact VASAGLE customer support. Refer to your purchase documentation for specific warranty details and contact information.
You can often find support contact details on the official VASAGLE website or through the retailer where the product was purchased.