I took my POCREATION Electric Riveter Conversion Connector Adapter apart and cannot get the internal teeth back in. How do I reassemble it?

The user manual for the POCREATION Electric Riveter Conversion Connector Adapter does not provide a detailed internal schematic or step-by-step instructions for reassembling the internal gripping jaws (the "teeth"). These adapters are generally not intended to be fully disassembled by the user beyond changing the external rivet heads.However, based on the design of standard electric riveter adapters, you can try the following general steps to reassemble the internal mechanism:Identify the Components: You should have three small metal jaw pieces (the teeth), a spring, and a conical sleeve (the jaw carrier).Position the Teeth: Place the three jaw pieces inside the conical sleeve. They should form a circle with the serrated edges facing inward toward the center.Insert the Spring: The spring usually sits behind the jaws to provide tension, pushing them forward into the narrow end of the cone so they can grip the rivet mandrel.Reinstall the Housing: Carefully slide the internal assembly back into the main blue/silver housing and screw the front cap (where the rivet head attaches) back on.Important Note: If the internal components are misaligned, the tool will not grip the rivet or eject the mandrel correctly. If you cannot get the teeth to stay in place, it is recommended to contact the retailer from whom you purchased the product for technical assistance, as the manual does not list specific internal replacement parts.

POCREATION POCREATION0za1bch4ug

Electric Riveter Conversion Connector Adapter User Manual

Model: POCREATION0za1bch4ug

Brand: POCREATION

Introduction

This manual provides instructions for the safe and efficient use of your Electric Riveter Conversion Connector Adapter. This accessory transforms your electric drill into a powerful riveting tool, suitable for various applications including factory work, home DIY projects, and woodworking. Its lightweight, compact design and ergonomic handle ensure comfortable and effective operation.

The adapter is designed for smooth and firm riveting, compatible with blind rivets of sizes Φ2.4mm, Φ3.2mm, Φ4.0mm, and Φ4.8mm.

Package Contents

1 x Rivet Adapter
1 x Auxiliary Handle
1 x Wrench

All components of the Electric Riveter Conversion Connector Adapter: the main blue and silver adapter, a silver wrench with three black rivet heads, and a black auxiliary handle.

Image: All components included in the package. This includes the main blue and silver riveter adapter, a silver wrench with three different sized rivet heads, and a black auxiliary handle.

Setup

Attach the Auxiliary Handle: Secure the black auxiliary handle to the designated mounting point on the riveter adapter. Ensure it is tightened firmly for stable operation.
Connect to an Electric Drill: Insert the hexagonal shaft of the riveter adapter into the chuck of your electric drill. Tighten the drill chuck securely to prevent slippage during operation.
Select Rivet Head: Choose the appropriate rivet head (nozzle) from the wrench that matches the diameter of the blind rivet you intend to use. The adapter supports Φ2.4mm, Φ3.2mm, Φ4.0mm, and Φ4.8mm rivets. Use the provided wrench to screw the selected rivet head onto the front of the adapter.

Close-up of the hexagonal shaft of the riveter adapter, ready to be inserted into a drill chuck.

Image: Detail of the hexagonal shaft, which connects the adapter to an electric drill.

Close-up of the front end of the riveter adapter, showing the nozzle where rivets are inserted.

Image: Front end of the adapter, where different sized rivet heads are attached.

Operating Instructions

Insert Rivet: Place the blind rivet into the selected rivet head (nozzle) at the front of the adapter.
Position for Riveting: Insert the rivet into the pre-drilled hole in the material you wish to join. Ensure the materials are aligned correctly.
Activate Drill: With the drill set to a moderate speed, activate the drill. The adapter will begin to pull the rivet mandrel, expanding the rivet and securing the materials.
Complete Riveting: Continue operating the drill until the rivet mandrel snaps off, indicating the rivet is fully set.
Remove Mandrel: After the rivet is set and the mandrel snaps, reverse the drill to eject the broken mandrel from the adapter.

The Electric Riveter Conversion Connector Adapter with its auxiliary handle and wrench, ready for use.

Image: The fully assembled riveter adapter, demonstrating its compact and ready-to-use form.

Maintenance

Cleaning: After each use, especially after extended periods, clean the adapter to remove any metal shavings or debris. Use a dry cloth or soft brush. Do not use abrasive cleaners or solvents.
Storage: Store the adapter in a dry, clean place, away from direct sunlight and extreme temperatures. Keep all components together to prevent loss.
Inspection: Periodically inspect the adapter for any signs of wear or damage, particularly the rivet heads and the connecting shaft. Replace any worn or damaged parts immediately.

Troubleshooting

Problem	Possible Cause	Solution
Rivet not setting properly.	Incorrect rivet head size; insufficient drill speed; worn rivet head.	Ensure the correct rivet head is used for the rivet size. Increase drill speed. Inspect and replace worn rivet head.
Adapter slipping in drill chuck.	Chuck not tightened sufficiently; chuck jaws worn.	Ensure the drill chuck is tightened securely. If problem persists, inspect drill chuck for wear.
Mandrel not ejecting.	Drill not reversed; debris inside adapter.	Ensure drill is set to reverse after riveting. Clean the adapter thoroughly to remove any obstructions.

Specifications

Attribute	Detail
Product Type	Rivet Drill Accessory / Electric Riveter Conversion Connector Adapter
Brand	POCREATION
Model Name / Number	POCREATION0za1bch4ug
Material	Aluminum Alloy
Color	As shown in images (typically blue and silver)
Weight	Approx. 490g (17.3oz)
Compatible Rivet Sizes	Φ2.4mm, Φ3.2mm, Φ4.0mm, Φ4.8mm Blind Rivets
Package Dimensions	17 x 6 x 5 cm

Warranty and Support

Information regarding specific product warranty details or direct manufacturer support contacts is not provided within this manual. For warranty claims or technical assistance, please refer to your purchase documentation or contact the retailer from whom you purchased this product.

Please note that the product's return policy, as per the purchase details, allows for a refund/replacement within 7 days of purchase.

Documents - POCREATION – POCREATION0za1bch4ug

no relevant documents

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.