Enchen Mini Electric Shaver User Manual

Introduction

Thank you for choosing the Enchen Mini Electric Shaver. This compact and powerful device is designed for convenient and efficient shaving, whether you are at home, in the office, or traveling. Its advanced features ensure a smooth and comfortable experience. Please read this manual thoroughly before using the product to ensure proper operation and maintenance.

Figure 1: The Enchen Mini Electric Shaver, showcasing its sleek, compact design.

Safety Information

For your safety and to prevent damage to the product, please adhere to the following guidelines:

• Do not submerge the entire shaver in water for extended periods, despite its waterproof rating.
• Avoid using the shaver while it is charging.
• Exercise caution to prevent cuts and skin irritation during use.
• Keep out of reach of children.
• Do not disassemble or attempt to repair the shaver yourself. Contact customer support for assistance.

Package Contents

Upon opening the package, please verify that all items are present:

• Enchen Mini Electric Shaver (Model Z3)
• USB Type-C Charging Cable
• Cleaning Brush
• User Manual

Product Features

• Mini and Portable Design: The shaver's diminutive size makes it an ideal travel and on-the-go companion, fitting snugly in your pocket for use anywhere.
• Precise and Comfortable Shave: Equipped with sharp stainless steel turbine rotating blades and a thin foil, operating at a trimming frequency of 9100RPM for a consistently smooth shave.
  

  Figure 2: Detailed view of the shaver's high-performance 20-blade system.

• IP6 Waterproof Rating: Crafted for both wet and dry utilization, ensuring secure functioning even in damp circumstances. The magnetically designed shaver head can be effortlessly detached and cleansed by rinsing with water.
  

  Figure 3: The shaver's waterproof design allows for easy cleaning under running water.

• Type-C Fast Charging: Highly compatible with power banks, computers, or laptops for rapid charging. A full charge takes only 30 minutes and provides over 6 hours of continuous usage.
  

  Figure 4: The shaver features convenient Type-C fast charging.

• Automatic Self-Grinding Technology: Blades sharpen themselves during use, ensuring consistent performance and longevity.
  

  Figure 5: The self-grinding blades maintain sharpness with every use.

Setup

Initial Charging

1. Before first use, fully charge the shaver.
2. Connect the provided USB Type-C cable to the charging port at the bottom of the shaver.
3. Plug the other end of the USB cable into a compatible USB power source (e.g., wall adapter, power bank, computer USB port).
4. The charging indicator light will illuminate. A full charge typically takes about 30 minutes.
5. Once fully charged, disconnect the charging cable.

Operating Instructions

Turning On/Off

• To turn on the shaver, press the power button located at the bottom.
• To turn off the shaver, press the power button again.

Shaving Technique

The Enchen Mini Electric Shaver can be used for both wet and dry shaving.

• Dry Shaving: For best results, ensure your skin is clean and dry. Gently press the shaver against your skin and move it in small, circular motions or straight strokes against the direction of hair growth.
• Wet Shaving: Apply shaving foam or gel to your face. Shave as you would with a traditional razor, moving the shaver in gentle, circular motions. Rinse the shaver head frequently during wet shaving.

Figure 6: The shaver provides a powerful yet gentle shave.

Maintenance

Cleaning the Shaver Head

Regular cleaning ensures optimal performance and hygiene.

1. Ensure the shaver is turned off before cleaning.
2. Gently pull the shaver head upwards to detach it from the main body. The head is magnetically attached.
3. Rinse the detached shaver head under running water to remove hair remnants and debris.
4. Use the provided cleaning brush to remove any stubborn hair particles from the blades and inner chamber.
5. Allow the shaver head to air dry completely before reattaching it to the shaver body.
6. Do not use harsh chemicals or abrasive materials to clean the shaver.

Troubleshooting

If you encounter any issues with your Enchen Mini Electric Shaver, please refer to the following common solutions:

• Shaver not turning on: Ensure the shaver is fully charged. Connect it to a power source and allow it to charge for at least 30 minutes.
• Reduced shaving performance: Clean the shaver head thoroughly to remove accumulated hair and debris. Ensure the blades are free from obstruction.
• Unusual noise during operation: Check if the shaver head is properly attached. Clean the blades and ensure no foreign objects are lodged within the mechanism.
• Charging issues: Verify that the USB Type-C cable is securely connected to both the shaver and the power source. Try using a different USB port or power adapter.

If the problem persists after attempting these solutions, please contact Enchen customer support for further assistance.

Specifications

Warranty and Support

Enchen products are manufactured to the highest quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the warranty card included with your product or visit the official Enchen website. Please retain your proof of purchase for any warranty claims.