Introduction
Thank you for choosing the Naroote Bluetooth Keyboard with Touchpad. This keyboard is designed to enhance your tablet experience, offering seamless integration and versatile functionality. It is compatible with Go 3 (2021), Go 2 (2020), and Go (2018) tablets. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.
Setup
1. Charging the Keyboard
Before initial use, fully charge the keyboard. Use the provided USB-C cable to connect the keyboard to a power source.
- Connect the USB-C end of the cable to the keyboard's charging port.
- Connect the USB-A end to a compatible USB power adapter or computer port.
- A full charge takes approximately 3 hours and provides up to 100 hours of continuous use or 100 days of standby time.

2. Bluetooth Connection
The keyboard uses Bluetooth 4.0 technology for high-speed connectivity.
- Ensure the keyboard is charged.
- Turn on the keyboard by sliding the power switch, usually located on the side or top edge. An indicator light may flash to show it's in pairing mode.
- On your tablet (Go 3, Go 2, or Go 2018), go to Settings > Bluetooth.
- Enable Bluetooth on your tablet.
- Search for available devices. The keyboard should appear as "Bluetooth Keyboard" or a similar name.
- Select the keyboard from the list to pair. Follow any on-screen prompts, such as entering a pairing code.
- Once paired, the indicator light on the keyboard will typically stop flashing or turn solid, indicating a successful connection.

Operating Instructions
1. Typing and Touchpad Use
The keyboard features a scissor-switch mechanism for a comfortable typing experience and an integrated touchpad for navigation.
- Typing: Use the keys as you would a standard laptop keyboard. The ergonomic layout is designed for extended use.
- Touchpad: The built-in touchpad supports standard gestures for navigation, clicking, and scrolling. Refer to your tablet's operating system settings for specific touchpad gesture configurations.
- FN Combination Keys: Utilize the 'Fn' key in combination with other keys for multimedia functions and shortcuts, as indicated by the blue icons on the keys.

2. Versatile Design and Sleep Mode
The keyboard offers flexibility in use and intelligent power management.
- Detachable Design: The magnetic design allows the keyboard to be easily attached or detached from your tablet, providing flexibility for different usage scenarios.
- Typing Angles: The design supports two typing angles, allowing you to adjust for optimal comfort and visibility.
- Automatic Sleep Mode: To conserve battery life, the keyboard automatically enters sleep mode after 10 minutes of inactivity. Press any key to wake it up.

Maintenance
Proper care will extend the life and performance of your keyboard.
- Cleaning: Use a soft, dry, lint-free cloth to wipe the surface of the keyboard. For stubborn dirt, slightly dampen the cloth with water or a mild electronics cleaner. Avoid excessive moisture.
- Storage: When not in use, store the keyboard in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Liquids: Do not expose the keyboard to liquids. In case of accidental spills, immediately power off the keyboard and allow it to dry completely before attempting to use it again.
- Handle with Care: Avoid dropping the keyboard or subjecting it to strong impacts.
Troubleshooting
Keyboard Not Connecting via Bluetooth
- Check Power: Ensure the keyboard is turned on and has sufficient battery charge.
- Re-pair: Go to your tablet's Bluetooth settings, forget the keyboard device, and then attempt to pair it again.
- Distance: Ensure the keyboard is within the 10-meter (33 feet) Bluetooth range of your tablet.
- Interference: Move away from other wireless devices that might cause interference.
- Tablet Bluetooth: Toggle your tablet's Bluetooth off and on.
Keyboard Not Responding
- Wake from Sleep: Press any key to wake the keyboard from sleep mode.
- Recharge: The battery might be low. Connect the keyboard to a charger.
- Re-establish Connection: Turn the keyboard off and on, then check your tablet's Bluetooth connection.
Touchpad Not Working
- Check Connection: Ensure the keyboard is properly connected via Bluetooth.
- Tablet Settings: Verify touchpad settings on your tablet.
- Restart: Try restarting both the keyboard and your tablet.
Specifications
| Feature | Detail |
|---|---|
| Product Material | ABS, PU |
| Battery Type | Lithium Ion Battery 402030 (built-in) |
| Battery Capacity | 350 mAh |
| Charging Interface | USB-C |
| Continuous Use Time | Approx. 100 hours (after 3 hours charging) |
| Standby Time | Approx. 100 days (per full charge) |
| Bluetooth Protocol | BT3.0, BT4.0, BT1.1 |
| Wireless Distance | Approx. 10 meters (33 feet) |
| Key Lifespan | Up to 3 million keystrokes per key |
| Compatibility | For Go 3 (2021), Go 2 (2020), Go (2018) tablets |
| Item Weight | 10.6 ounces |
| Package Dimensions | 11.81 x 8.27 x 0.79 inches |
Warranty and Support
For information regarding warranty coverage and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Naroote is committed to providing quality products and assistance.