1. Introduction
Thank you for choosing the OLEVS Men's Two-Tone Stainless Steel Quartz Chronograph Moon Phase Watch. This manual provides comprehensive instructions to help you understand and utilize all the features of your new timepiece. Please read it carefully to ensure proper operation and longevity of your watch.
Figure 1.1: Front view of the OLEVS Men's Two-Tone Quartz Chronograph Watch. This image displays the watch's elegant design, featuring a blue dial with gold accents, Roman numerals, and sub-dials for chronograph and moon phase functions.
Key Features:
- Precise Quartz Movement: High-quality original quartz movement ensures accurate timekeeping with a battery life of 2 to 3 years.
- Luxury Design: Features a diamond-set dial, luminous hands, a hollow carved design, and a moon phase display, blending professional and casual styles.
- Durable Construction: Crafted from 316L stainless steel for the case and bracelet, resistant to sweat and rust. Equipped with a high-hardness coated mirror for scratch and corrosion resistance.
- Water Resistance: Water-resistant up to 30 meters (3 ATM), suitable for daily waterproofing.
- Luminous Display: HD luminous powder on hands and markers for readability in low-light conditions.
2. Setup and Initial Adjustment
2.1 Unpacking and Inspection
Carefully remove the watch from its packaging. Inspect the watch for any visible damage. Ensure all protective films are removed from the crystal and case back.
2.2 Adjusting the Bracelet Length
The watch comes with an adjuster tool to help you modify the bracelet length for a comfortable fit. If you are unsure, it is recommended to have this adjustment performed by a professional jeweler.
Figure 2.1: The OLEVS watch comfortably fitted on a wrist. Proper bracelet adjustment ensures comfort and prevents excessive movement during wear.
3. Operating Your Watch
Your OLEVS watch features a precise quartz movement with chronograph and moon phase functions. Familiarize yourself with the crown and push-buttons for optimal use.
Figure 3.1: Side view of the watch illustrating the crown and push-buttons. The top button controls the chronograph start/stop, the crown adjusts time and moon phase, and the bottom button resets the timer.
3.1 Setting the Time
- Pull the crown (middle button on the right side) out to the first or second click position (depending on model, typically the outermost position for time setting).
- Rotate the crown to set the hour and minute hands to the correct time.
- Push the crown back in to the normal position to start the watch.
3.2 Using the Chronograph Function
The chronograph allows you to measure elapsed time.
- Start/Stop: Press the top push-button (at the 2 o'clock position) to start the chronograph. Press it again to stop.
- Reset: While the chronograph is stopped, press the bottom push-button (at the 4 o'clock position) to reset all chronograph hands to their zero positions.
3.3 Adjusting the Moon Phase Display
The moon phase display (at the 3 o'clock position) rotates with time. To adjust it:
- Pull the crown out to the appropriate setting position (refer to Figure 3.1).
- Rotate the crown to advance the moon phase display to the desired phase.
- Push the crown back in to secure the setting.
3.4 Luminous Feature
The hands and markers on your OLEVS watch are coated with HD luminous powder. After exposure to light, they will glow in the dark, allowing for easy time reading in low-light conditions.
4. Maintenance and Care
Proper care will ensure the longevity and performance of your OLEVS watch.
4.1 Water Resistance
Your watch is water-resistant up to 30 meters (3 ATM). This means it is suitable for daily use, such as hand washing or light rain. Important:
- Do not operate the crown or push-buttons while the watch is wet or submerged in water.
- Avoid exposing the watch to hot water, steam, or extreme temperature changes, as this can compromise the water seals.
- Not suitable for swimming, diving, or showering.
4.2 Cleaning
To clean your watch, wipe the case and bracelet with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using chemical cleaners or abrasive materials.
4.3 Battery Replacement
The quartz movement is powered by a battery with an estimated lifespan of 2 to 3 years. When the watch stops or the second hand begins to jump irregularly (End-of-Life indicator), it's time for a battery replacement. It is highly recommended to have the battery replaced by a qualified watchmaker to ensure the water resistance is maintained.
5. Troubleshooting
If you encounter any issues with your OLEVS watch, please refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch has stopped or is running intermittently. | Battery depleted. | Replace the battery. Consult a professional watchmaker. |
| Time is inaccurate. | Incorrect time setting; low battery. | Re-set the time. If problem persists, consider battery replacement. |
| Condensation inside the crystal. | Exposure to extreme temperature changes or compromised water resistance. | Immediately take the watch to a professional watchmaker for inspection and repair to prevent internal damage. |
| Chronograph hands do not reset to zero. | Requires calibration or internal issue. | Consult a professional watchmaker for adjustment or repair. |
For issues not listed above or if troubleshooting steps do not resolve the problem, please contact OLEVS customer support or a certified watch repair center.
6. Specifications
Detailed specifications for your OLEVS Men's Quartz Chronograph Moon Phase Watch:
Figure 6.1: Visual representation of key product parameters including dimensions and materials.
| Feature | Detail |
|---|---|
| Model Number | K-GX-G2859G-B-JL-1 |
| Movement | Original Quartz Movement |
| Case Material | 316L Stainless Steel |
| Band Material | Stainless Steel Bracelet (Two-Tone) |
| Mirror Material | High Hardness Glass Mirror |
| Case Diameter | 42 MM (without handle) |
| Case Thickness | 12 MM (includes mirrors) |
| Band Width | 20 MM |
| Band Length | 21 CM |
| Watch Weight | 128 grams |
| Water Resistance | 30m (3 ATM) |
| Product Dimensions (L x W x H) | 14.5 x 6.5 x 2.5 cm |
Note: All sizes are manually measured; slight variations may occur.
7. Warranty and Support
OLEVS is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
Customer Support:
For technical assistance, service, or inquiries regarding your OLEVS watch, please refer to the contact information provided at the point of purchase or visit the official OLEVS website for support resources.
Always ensure that any repairs or battery replacements are carried out by authorized service centers to maintain the integrity and warranty of your watch.
