Introduction
This manual provides instructions for the proper use and maintenance of your AULCMEET replacement AC remote control. This remote is designed to be compatible with various Panasonic Inverter R32 wall-mounted air conditioner models. Please read this manual thoroughly before use to ensure optimal performance and longevity of your remote control.
Setup
1. Battery Installation
The remote control requires two (2) AAA batteries (not included).
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards to open the compartment.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Image: Rear view of the AULCMEET remote control, showing the battery compartment cover with an "OPEN" indicator. This is where two AAA batteries are inserted.
2. Initial Use
This replacement remote control is designed to work immediately with compatible Panasonic Inverter R32 air conditioner models without any prior setup or programming. Simply install the batteries, point the remote towards your air conditioner, and begin operation.
Operating Instructions
Familiarize yourself with the buttons and their functions on your remote control.
Image: Front view of the AULCMEET remote control, displaying the LCD screen and all control buttons.
Button Functions:
- OFF/ON (Orange Button): Powers the air conditioner on or off.
- POWERFUL/ECO: Toggles between Powerful mode for rapid cooling/heating and Eco mode for energy-saving operation.
- nanoe-G: Activates or deactivates the nanoe-G air purification system (if supported by your AC unit).
- MODE: Cycles through available operating modes (e.g., Cool, Dry, Fan, Auto).
- TEMP ▲ / ▼: Adjusts the desired temperature setting.
- FAN SPEED/QUIET: Adjusts the fan speed or activates Quiet mode for reduced noise.
- SLEEP: Activates Sleep mode, which gradually adjusts temperature for comfortable sleep and energy saving.
- AIR SWING: Controls the vertical airflow direction (louvers).
- TIMER ON / OFF: Sets the timer for the air conditioner to turn on or off automatically.
- SET: Confirms timer settings or other advanced functions.
- CANCEL: Cancels timer settings or other selected functions.
- CHECK: Used for checking error codes or system status (refer to your AC unit's manual for details).
- CLOCK: Sets the current time on the remote's display.
- RESET: Resets the remote control to its default settings. This button is usually recessed and requires a pointed object to press.
Display Information:
The LCD screen on the remote control displays various information, including:
- Current temperature setting.
- Operating mode (Cool, Dry, Fan, Auto).
- Fan speed setting.
- Timer status (ON/OFF).
- Battery indicator (if low).
Maintenance
1. Battery Replacement
When the remote control's display becomes dim or the remote stops responding, it's time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section. Always replace both batteries at the same time with new AAA batteries.
2. Cleaning
To clean the remote control, wipe it gently with a soft, dry cloth. Do not use liquid cleaners, abrasive cleaners, or chemical solvents, as these can damage the remote's surface or internal components.
Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new ones.
- Ensure there are no obstructions between the remote control and the air conditioner's receiver.
- Confirm the remote is pointed directly at the air conditioner.
- Display is dim or blank:
- Batteries are low or depleted. Replace them.
- Air conditioner not responding to specific functions:
- Ensure your specific Panasonic AC model supports the function (e.g., nanoe-G). Refer to your air conditioner's original manual.
- Try resetting the remote control using the recessed RESET button.
Specifications
| Feature | Detail |
|---|---|
| Brand | AULCMEET |
| Model Number | PU9VKH-8 (Compatible with various Panasonic models) |
| Power Source | 2 x AAA Batteries (not included) |
| Product Dimensions | 5 x 1 x 0.5 inches (approximately 12.7 x 2.54 x 1.27 cm) |
| Item Weight | 1.9 ounces (approximately 53.8 grams) |
| Special Feature | Ergonomic design |
| Color | White |
| Compatible Devices | Panasonic Inverter R32 Wall-Mounted Air Conditioners (e.g., A75C04239, A75C00410, A75C02570, A75C00350, A75C03670, A75C00510, A75C00470, CS-PU9WKH-8M, CS-PU12WKH-8M, CS-PU18WKH-8M, CS-PU18UKH-8, CS-PU24UKH-8, CU-PU9WKH-8M, CU-PU12WKH-8M) |
Image: Side and front view of the AULCMEET remote control, illustrating its dimensions: approximately 14.5 cm (5.71 in) in length and 6 cm (2.36 in) in width.
Warranty and Support
For any issues or questions regarding your AULCMEET replacement remote control, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.
