Ya-man Facial Device Lift-Up Photo Plus Prestige SP III YJFM25B Instruction Manual

1. Introduction

Thank you for purchasing the Ya-man Facial Device Lift-Up Photo Plus Prestige SP III. This device incorporates advanced technology used in professional aesthetic equipment, offering 11 functions across 5 modes for comprehensive total care and daily skin maintenance. Please read this manual thoroughly before use to ensure safe and effective operation.

2. Safety Information

2.1 Important Safety Precautions

To prevent injury or damage to the device, always adhere to the following safety guidelines:

• Do not use if you are using medical electrical equipment (e.g., implanted pacemakers, life-support electrical equipment like artificial heart-lung machines, wearable electrical equipment like electrocardiographs).
• Do not use if you have heart disease, disorders, or suspected conditions.
• Do not use if you cannot express your intentions independently.
• Do not use if you cannot perceive temperature or stimulation sensations.
• Do not use if you have an autoimmune disease.

2.2 Usage Guidelines

• If you feel heat, move the device slightly faster. Alternatively, using a cotton pad can help mitigate the heat sensation.
• Ensure the entire electrode head is in contact with your skin during use.
• Always move the device across your skin. Holding it in one spot can cause burns or low-temperature burns.
• Do not apply the electrode head directly to your eyelids or around your eyes.

3. Product Overview and Features

The Ya-man Photo Plus Prestige SP III is designed to provide professional-grade aesthetic care in your home. It integrates 11 functions across 5 distinct modes to address various skin concerns.

Image: The Ya-man Photo Plus Prestige SP III facial device, showcasing its ergonomic design and multi-functional head.

3.1 Key Technologies

• CERTEC Technology: Next-generation aging care technology that applies thermal electrical stimulation deep into the stratum corneum while warming the skin.
• Advanced Electrode Structure: Features a honeycomb structure with parallel electrodes (double ring) for efficient and even heat distribution, reducing unevenness during treatment.
• DWHP Waveform: Unique penetrating DWHP (Dynamic Whitening Hyper Pulse) waveform enhances the penetration of beauty ingredients, including Vitamin C derivatives, Tranexamic acid, Niacinamide, 3-O-Ethyl Ascorbic Acid, and Phenylethyl Resorcinol.

Image: Diagram illustrating the CERTEC technology, showing thermal electrical stimulation penetrating the skin layers.

4. Setup

4.1 Unpacking and Initial Charge

1. Carefully remove the device and all accessories from the packaging.
2. Inspect the device for any visible damage.
3. Connect the charging cable to the device and a suitable power source. Ensure the device is fully charged before first use. The charging indicator will typically change color or turn off when charging is complete.

4.2 Preparing for Use

• Ensure your skin is clean and free of makeup before starting any treatment.
• Apply a suitable skincare product (e.g., lotion, serum, gel) to the treatment area to ensure smooth gliding of the device and optimal conductivity.

5. Operating Instructions

The device features 5 modes, each designed for specific skin care benefits. It is recommended to follow the sequence for a full course treatment or use individual modes as needed.

5.1 Mode Selection and Operation

Press the 'MODE' button to cycle through the available modes. Use the 'LEVEL' button to adjust intensity if applicable.

5.1.1 CLEAN Mode (Warm Cleansing)

This mode uses CERTEC, ion introduction, and red LED to gently warm the skin and absorb impurities from pores. It prepares the skin for subsequent skincare steps by removing residual dirt and dead skin cells.

Image: Diagram illustrating the CLEAN mode, showing how warmth and ion introduction work to cleanse pores.

5.1.2 DWHP Mode / NEB Mode (Warm Introduction Care)

Utilizes CERTEC, DYHP, DWHP, red LED, and orange LED. This mode promotes the penetration of beauty ingredients into the stratum corneum. You can switch between DYHP (Dynamic Hyper Pulse) and DWHP (Dynamic Whitening Hyper Pulse) to enhance the efficiency of ingredient delivery, providing moisture and brightening components deep into the skin.

Image: Diagram illustrating the DWHP/NEB mode, showing enhanced penetration of skincare ingredients into the deeper skin layers.

5.1.3 EMS UP Mode (Facial Muscle Training)

This mode combines CERTEC, high-frequency EMS, and red LED. It provides deep, stimulating high-frequency EMS to comfortably train the facial muscles that support the skin's foundation. This mode can also be used on the neck and décolleté area.

Image: Diagram illustrating the EMS UP mode, showing how electrical muscle stimulation targets facial muscles for toning.

5.1.4 EYE CARE Mode (Warm Eye Area Care)

Designed specifically for the delicate eye area, this mode uses CERTEC, dedicated EMS, red LED, and microcurrent. It gently approaches signs of aging around the eyes with mild electrical current and warming effects.

Image: Diagram illustrating the EYE CARE mode, showing targeted care for the delicate skin around the eyes.

5.1.5 COOL Mode (Cooldown)

As the final step in your skincare routine, this mode uses cooling, microcurrent, and blue LED to tighten and soothe the skin, helping to refine its texture. Apply the device by gently pressing it against the skin and moving it upwards.

Image: Diagram illustrating the COOL mode, showing the cooling effect on the skin to tighten pores and soothe.

6. Maintenance

6.1 Cleaning the Device

• After each use, wipe the electrode head and device body with a soft, damp cloth.
• Do not use abrasive cleaners, alcohol, or harsh chemicals, as these can damage the device.
• Ensure the device is completely dry before storing or recharging.

6.2 Storage

• Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• Keep out of reach of children.

7. Troubleshooting

If you encounter any issues with your device, please refer to the following common troubleshooting steps:

If the problem persists after trying these steps, please contact customer support.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Ya-man website. Keep your purchase receipt as proof of purchase for warranty claims.

Ya-man Official Website: www.ya-man.com