POWERTEC TR-8700 Hair and Beard Trimmer User Manual

Introduction

Thank you for choosing the POWERTEC TR-8700 Hair and Beard Trimmer. This professional-grade, battery-powered grooming tool is designed for precise and efficient hair and beard trimming. Please read this manual carefully before using the device to ensure safe and optimal performance. Keep this manual for future reference.

Important Safety Instructions

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

• DANGER - To reduce the risk of electric shock:
  • Do not reach for an appliance that has fallen into water. Unplug immediately.
  • Do not use while bathing or in a shower.
  • Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.
  • Always unplug this appliance from the electrical outlet immediately after using.
  • Unplug this appliance before cleaning.
• WARNING - To reduce the risk of burns, electric shock, fire, or injury to persons:
  • An appliance should never be left unattended when plugged in.
  • Close supervision is necessary when this appliance is used by, on, or near children or invalids.
  • Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
  • Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water.
  • Keep the cord away from heated surfaces.
  • Never drop or insert any object into any opening.
  • Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
  • Do not use this appliance with a damaged or broken comb, as facial injury may occur.
  • Always attach plug to appliance first, then to outlet. To disconnect, turn all controls to "off" then remove plug from outlet.

Package Contents

Your POWERTEC TR-8700 package should include the following items:

• POWERTEC TR-8700 Hair and Beard Trimmer
• Charging Dock / Stand
• Power Adapter
• Multiple Guide Combs (various sizes)
• Cleaning Brush
• Lubricating Oil

Figure 1: Contents of the POWERTEC TR-8700 package, including the trimmer, charging stand, power adapter, various guide combs, cleaning brush, and lubricating oil.

Product Features

The POWERTEC TR-8700 is engineered for professional performance and user convenience:

• Model: TR-8700
• Power Source: Battery Powered (Cordless operation)
• Battery Capacity: Approximately 2600 mAh (indicated on product images)
• Display: Digital display showing battery level and possibly speed/power (indicated on product images)
• Recommended Use: Face, Hair (suitable for all hair types)
• Color: Black
• Professional Performance: Designed for precise and efficient cutting.

Figure 2: Front view of the POWERTEC TR-8700 Hair and Beard Trimmer on its charging stand, highlighting its professional design and digital display.

Figure 3: A close-up view of the POWERTEC TR-8700's digital display, showing battery level and "POWER LEFT" indicator.

Setup

Charging the Trimmer

1. Before first use, fully charge the trimmer for optimal battery life.
2. Connect the power adapter to the charging dock.
3. Place the trimmer securely into the charging dock. Ensure the charging contacts align.
4. Plug the power adapter into a suitable electrical outlet.
5. The digital display on the trimmer will indicate the charging status. Allow the trimmer to charge until the display shows a full charge (e.g., 100%).

Attaching Guide Combs

1. Ensure the trimmer is turned off before attaching or detaching guide combs.
2. Select the desired guide comb size for your preferred cutting length.
3. Align the guide comb with the trimmer blade and push it firmly until it clicks into place.
4. To remove, gently pull the comb away from the blade.

Operating Instructions

Basic Trimming

1. Ensure your hair or beard is clean and dry before trimming.
2. Attach the appropriate guide comb for the desired length.
3. Press the power button to turn on the trimmer.
4. Hold the trimmer with the blade flat against the skin and move it slowly against the direction of hair growth.
5. For detailing or outlining, remove the guide comb and use the bare blade carefully.
6. After use, press the power button to turn off the trimmer.

Adjusting Cutting Length (if applicable)

The cutting length is primarily controlled by the attached guide combs. Some models may have a taper lever for fine adjustments; refer to the physical device for this feature.

Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and performance of your trimmer.

Cleaning the Blades

1. Turn off the trimmer and unplug it from the charger.
2. Remove any attached guide comb.
3. Use the provided cleaning brush to brush away loose hairs from the blades and the trimmer body.
4. For a more thorough clean, the blades can often be rinsed under running water (check product's water resistance rating; if not specified, avoid direct water contact with the main body). Ensure the trimmer is completely dry before storage or next use.

Oiling the Blades

1. After cleaning, apply a few drops of the provided lubricating oil onto the blades.
2. Turn on the trimmer for a few seconds to allow the oil to distribute evenly.
3. Wipe off any excess oil with a soft cloth. Oiling helps maintain blade sharpness and reduces friction.

Storage

Store the trimmer in a cool, dry place, away from direct sunlight and moisture. Keep it out of reach of children.

Troubleshooting

Specifications

• Model: TR-8700
• Brand: POWERTEC
• Power Source: Battery Powered
• Recommended Use: Face, Hair
• Hair Type: All Hair Types
• Color: Black
• Battery: Rechargeable (approx. 2600 mAh)

Warranty and Support

For information regarding warranty coverage and customer support, please refer to the warranty card included with your product or visit the official POWERTEC website. Keep your purchase receipt as proof of purchase for any warranty claims.

If you encounter any issues not covered in this manual, please contact POWERTEC customer service for assistance.